فهرست مطالب

نشریه انرژی ایران
سال شانزدهم شماره 2 (پیاپی 59، تابستان 1392)

  • تاریخ انتشار: 1392/05/20
  • تعداد عناوین: 7
|
  • نسیم طاهونی، محمدرضا جعفری اشلقی صفحه 1
    ارزش حرارتی بالای میعانات گازی موجب توجه شرکتهای گازی به این منبع گرانبها شده است. از این رو، شناخت ویژگی ها و شرایط نگهداری میعانات گازی اهمیت روز افزونی پیدا کرده است. وجود ذرات سبک و فرار در میعانات گازی و به تبع آن، نیاز به فرایند پایدار سازی از مهمترین چالش های پیش روی پالایشگاه ها برای استفاده از این منبع ارزشمند می باشد. هدف این مقاله، تحلیل اکسرژی واحد پایدار سازی میعانات گازی پالایشگاه پارس جنوبی (واحد 103) می باشد. بدین منظور، ابتدا شبیه سازی واحد به کمک نرم افزار شبیه سازی HYSYS انجام گرفت. مشخصات فشار بخار رید محصول نهایی یعنی psi7RVP=، محصول شبیه سازی حاضر را برای روز های گرم تابستان به عنوان محصولی قابل قبول تایید کرد. در ادامه، تحلیل اکسرژی بر روی تمام واحدهای فرایندی موجود به دو روش جریانی و واحدی انجام شد. نتایج نشان داد که برج پایدارسازی فرایند و نیز مبدل حرارتی جانبی برج از مهمترین واحد های فرایندی نیازمند اصلاح می باشند.
    کلیدواژگان: بازده اکسرژتیک، پایدار سازی میعانات گازی، تحلیل اکسرژی، فشار بخار رید
  • محمدحسین شمس، محسن کیا، بهداد مهدوی صفحه 15
    مقاله حاضر به ارائه روشی اجرایی و عملیاتی برای مطالعات فنی امکان سنجی احداث نیروگاه فتوولتائیک متصل به شبکه با ظرفیت 100 کیلووات به منظور اخذ مجوز سازمان انرژی نو ایران می پردازد. ماژول و اینورتر اجزای اصلی نیروگاه فتوولتائیک هستند و انتخاب ظرفیت و چیدمان مناسب آنها سبب افزایش بهره وری نیروگاه از پتانسیل انرژی خورشیدی موجود و نیز کاهش هزینه کلی سیستم می گردد. در این روش، ابتدا با توجه به موقعیت جغرافیایی محل احداث نیروگاه، آرایش آرایه های فتوولتائیک در زمین نیروگاه، با قید اشغال مساحت کمتر و نیز رعایت کردن فاصله لازم بین رشته های فتوولتائیک برای سهولت تعمیر و نگهداری و نیز جلوگیری از سایه افکنی ماژول ها روی هم صورت گرفته و زاویه بهینه پنل ها استخراج شده و به همراه پارامترهای اصلی برای طراحی اعم از ظرفیت نیروگاه، برند و نوع ماژول مربوطه و سطح ولتاژ اتصالی اینورتر به شبکه وارد نرم افزار Sunny Design می شوند. این نرم افزار حالات مناسب انتخاب اینورترها را مشخص کرده و حالت بهینه تعیین می شود. در روش پیشنهادی، بعد از انتخاب مدل ماژول و اینورتر، طراحی بهینه نیروگاه فتوولتائیک با در نظر گرفتن پارامتر هایی نظیر قابلیت اطمینان، هزینه، استفاده بهینه از مساحت زمین و افزایش کارایی اجزای نیروگاه با تعیین محدوده نقطه کار آنها با استفاده از نرم افزار PVSyst صورت می پذیرد. در این نرم-افزار، نحوه آرایش ماژول های فتوولتائیک در آرایه ها و تعداد رشته ها مشخص می گردد. در ادامه، منحنی های خروجی، سایه افکنی، تلفات با استفاده از نرم افزار PVSyst استخراج و تحلیل می گردند.
    کلیدواژگان: آرایش تجهیزات، اینورتر، ماژول، نیروگاه فتوولتاییک
  • عالیه کاظمی، حامد حامد شکوری گنجوی، شیوا شکیبا، مهناز حسین زاده صفحه 31
    در این تحقیق، برای تعیین مناسب ترین مدل عرضه انرژی برای ایران و نیز آسیب شناسی و درک مزایا و معایب مدل های مختلف اجرا شده در جهان و ایران، 13 مدل عرضه انرژی شناخته شده در جهان شامل MARKAL، TIMES، EFOM، WASP، JASP، MESSAGE، IDEAS، RETScreen، LEAP، NPEP، MESAP، NEMS و ENERGY2020 مورد بررسی قرار گرفته اند. سپس با انتخاب شاخص های مناسب و دریافت نظر خبرگان به روش فرایند تحلیل سلسله مراتبی (AHP)، مدل های مختلف مورد ارزیابی قرار گرفته و مناسب ترین مدل های عرضه انرژی برای کشور انتخاب شده اند.
    کلیدواژگان: انرژی، مدل سازی، مدل های عرضه انرژی، فرایند تحلیل سلسله مراتبی
  • هاجر باقری طولابی، محمدحسن مرادی، سحر باقری طولابی صفحه 61
    میزان تابش خورشید، مهم ترین پارامتر جهت طراحی و توسعه سیستم های مختلف انرژی خورشیدی است. به منظور برآورد تابش خورشیدی، مدل های مختلفی توسط محققان پیشنهاد شده اند که لزوم نصب تجهیزات گران قیمت را در ایستگاه های هواشناسی مرتفع می سازند. معروفترین این مدل ها مدل انگسترم است. به دلیل ساختار غیرخطی و وابسته به پارامترهای محیطی این مدل ها، تکنیک های حل قدرتمندی مورد نیاز است. در این مقاله، روش جدیدی جهت برآورد متوسط روزانه تابش خورشیدی در ماه بر روی سطح افقی، بر مبنای مدل آنگسترم و با استفاده از الگوریتم زنبورها با برنامه نویسی در محیط نرم افزار MATLAB معرفی شده است. ضرایب تجربی مدل آنگسترم برای چهار منطقه آب و هوایی مختلف ایران در محیط نرم افزار محاسبه شده و مقدار متوسط روزانه تابش کلی خورشید تخمینی با روش پیشنهادی در ماه برای مناطق نمونه ارائه شده است. مقایسه بین نتایج بدست آمده از روش پیشنهادی و روش های دیگر، کارایی تکنیک پیشنهادی را برای پیدا کردن تابش خورشیدی برای هر چهار منطقه نمونه ایران ثابت می کند.
    کلیدواژگان: الگوریتم زنبورها، تابش کلی خورشیدی، معادله آنگسترم، تکنیک های رگرسیون آماری، تکنیک های هوشمند
  • بتول طیبی، سید محمد شبیری، محمدهاشم رضایی صفحه 77
    در تحقیق پیش رو، هدف آن است تا با بررسی وضعیت درسی کشورهای پیشرفته و تجزیه و تحلیل محتوای آنها، میزان توجه به موضوع آموزش انرژی های پاک وتجدیدپذیر روشن گردیده و بر اساس آن راهکارهای پیشنهادی برای نظام آموزش و پرورش ایران ارائه گردد. روش مورد استفاده، تحلیل محتوا از نوع کمی بوده است. جامعه آماری کتابهای درسی مرتبط با موضوع تحقیق در مجتمع تطبیقی بین المللی تهران در سال تحصیلی 91–90 است که بدین منظور 24عنوان از کتابهای درسی این مجتمع در دوره های ابتدایی، راهنمایی و دبیرستان را شامل می شود. این بررسی با استفاده از ابزار فهرست وارسی تحلیل محتوا که دارای 25 نوع از پنج منبع انرژی های پاک وتجدیدپذیر استخراج شده، انجام پذیرفت وهمچنین از پایایی 90 درصد برخوردار بوده است. یافته های پژوهش نشان می دهد که از میان کتابهای مورد بررسی در مجتمع تطبیقی بین المللی تهران، در مجموع، بیشترین میزان توجه به امرآموزش انواع انرژی های پاک وتجدیدپذیردر کتاب فیزیک سوم راهنمایی و کمترین توجه در علوم اول ابتدایی، همچنین در میان پایه های تحصیلی بیشترین توجه در پایه سوم راهنمایی و کمترین توجه در پایه اول ابتدایی صورت گرفته است. از سوی دیگر، با تفکیک ساختاری محتوای کتابهای درسی مشاهده شد که بیشترین توجه در قالب تصویر و کمترین توجه به سایر موارد ارائه گردیده است. از میان منابع مختلف انرژی های پاک وتجدیدپذیر، بیشترین توجه به منبع انرژی خورشیدی و کمترین توجه به منبع انرژی زمین گرمایی صورت گرفته است.
    کلیدواژگان: برنامه درسی، کشورهای پیشرفته، انرژیهای پاک وتجدید پذیر
  • رضا اعتماد، محسن کیا، محمدصادق سپاسیان، مهرداد ستایش نظر، محمدصادق صفحه 97
    با توجه به رشد روزافزون تقاضای انرژی الکتریکی، لزوم برنامه ریزی توسعه انتقال (Transmission Expansion Planning=TEP) امری اجتناب ناپذیر می باشد. برنامه توسعه انتقال به معیارهای مختلفی وابسته است. در این مقاله، ابتدا به بررسی معیارهای موثر در برنامه ریزی توسعه انتقال پرداخته شده وسپس یک مدل برای TEP پیشنهاد گردیده است. در این مدل با استفاده روش تحلیل سلسله مراتبی (Analytical Hierarchy Process=AHP) و تکنیک آنتروپی که یکی از تکنیک های ارزیابی اوزان در روش تصمیم گیری چند شاخصه (MADM= Muli Atribute Decision Making) می باشد، به برنامه ریزی توسعه انتقال پرداخته شده است. برای این منظور، پنج معیار اساسی معرفی و با استفاده از روش پیشنهادی AHP و تکنیک آنتروپی به بهینه سازی مساله TEP پرداخته می شود. برای بررسی کارایی الگوریتم پیشنهادی، روش مذکور بر روی شبکه 14 شین IEEE پیاده سازی شده است.
    کلیدواژگان: برنامه ریزی توسعه انتقال (TEP)، تصمیم گیری چند معیاره، تکنیک آنتروپی، روش تحلیل سلسله مراتبی (AHP)، قیمت حدی ناحیه ای
  • محمد علی شاه حسینی، محمد فقیه علی آبادی صفحه 113
    ضعف در صادرات خدمات فنی و مهندسی نفت و گاز نه تنها فرصت توسعه ملی را از ایران می رباید، بلکه این ضعف در دراز مدت به عنوان تهدید قلمداد می گردد، چرا که اگر همچون امروز تنها تکیه بر صادرات انرژی باشد و از دانش آن در جهت توسعه خدمات فنی و مهندسی در خارج از مرزها استفاده نگردد، طبق برآوردها در آینده ای نه چندان دور، ایران از صادر کننده خالص انرژی به وارد کننده آن تبدیل می گردد. توسعه صادرات خدمات فنی و مهندسی نفت و گاز و درآمدزایی از طریق آن نه تنها امکان حفظ این انرژی با رویکردی بلند مدت را فراهم می کند، بلکه توان کشور را در زمینه های ارز آوری، ایجاد اشتغال، ارتقاء فناوری و دانش فنی، بهبود روابط سیاسی و صدور فرهنگ و تمدن بالا خواهد برد. اما با وجود تلاش های بسیار در توسعه دانش فنی،کماکان این مسیر با انسدادهای بیشماری روبروست. در این مقاله، بر اساس مطالعات کتابخانه ای و مصاحبه های نیمه ساختار یافته کیفی از نخبگان، و با رویکرد تحلیل تم، مدل مفهومی تبیین گردیده که به واکاوی گلوگاه های توسعه نظام فنی و مهندسی صنعت نفت پرداخته است. همچنین از دستاوردهای این مقاله می توان به شناسایی موانع در سه حوزه زمینه، رفتار و ساختار اشاره کرد.
    کلیدواژگان: صادرات، خدمات فنی و مهندسی، نفت و گاز، تحلیل تم، زمینه، رفتار، ساختار
|
  • Nasim Tahooni, Mohammadreza Jafari Page 1
    This study covers the exergy analysis of the condensate stabilization unit of South Pars Gas Refinery. In this regard، the simulation of unit is carried out using HYSYS software to achieve all required data for exergy calculations. The final product is suitable for summer، as the Reid Vapor Pressure is achieved about 7 Psia. Afterwards، the exergy analysis is done using source-sink or stream-wise methods. Having analyzed all unit operations، it is shown that condensate tower and the associated heat exchanger have the most scope for energy improvement.
    Keywords: Exergetic efficiency, Condensate stabilization, Exergy analysis, Raid vapour pressure
  • Mohammad Hossein Shams, Mohsen Kia, Behdad Mahdavi Page 15
    This paper presents a practical and operational aspects of optimal sizing of equipments in a 100 kW grid connected photovoltaic power plant. PV modules and inverters are the main elements of PV power plants and optimal selection of capacity and configuration of them will cause in increase of output energy. Photovoltaic modules in the design، arrangement and number of strings in the array are specified. Also proposed method describes how to select the inverter and also how to select the optimal configuration of the various configurations. The deployment of arrays of photovoltaic power plants in the field، with the space between the rows mentioned obeying occupy less area for ease of maintenance and prevention of photovoltaic modules shading effects. Also according to the latitude of Tehran، the optimum slope of photovoltaic modules is determined in terms of design. Finally، the proposed design and calculations verified by PVSyst simulation software.
    Keywords: Photovoltaic power plant, Module, inverter, configuration of elements
  • Alieh Kazemi, Hamed Shakouri, Shiva Shakiba, Mahnaz Hossein Zadeh Page 31
    In this paper، for selecting the most suitable energy supply model for Iran and for being familiar with advantages and disadvantages of the different models، thirteen famous energy supply models have been introduced and analyzed. The models consist of: MARKAL، TIMES، EFOM، WASP، JASP، MESSAGE، IDEAS، RETScreen، LEAP، NPEP، MESAP، NEMS and ENERGY2020. Then using Analytic Hierarchy Process (AHP) mothod and choosing appropriate criteria، the models have been compared and the most suitable model for Iran has been selected.
    Keywords: energy, modeling, energy supply models, Analytic Hierarchy Process
  • Hajar Bagheri, Mohammad Hassan Moradi, Sahar Bagheri Page 61
    Solar radiation estimation is an important part for various solar energy systems. Many researches have proposed different techniques to estimate the solar radiation that hinder using expencive devices for direction measurement of solar radiation. Nonlinear and complex nature of these methods forced researchers to look for quick and efficient techniques to solve related issues. In this paper، a new method based on the Angstrom equation is introduced which estimates the monthly average daily global solar radiation on a horizontal surface by Bees Algorithm as a heuristic technique implemented in MATLAB software. The empirical coefficients for Angstrom equation are calculated for four different climate regions of Iran using proposed method proved the efficiency and predominance of the new techniue to find a more accurate level of solar radiation.
    Keywords: Bees Algorithm, Global Solar Radiation, Angstrom equation, Statistical regression techniques, Intelligent techniques
  • Batoul Tayyebi, Mohammad Shobeyri, Mohammad Hashem Rezaie Page 77
    The aim of present study is to evaluate & analyze the Developed Countries'' content curriculum and estimate their attentions on teaching the Clean & Renewable Energies، in order to offer solutions for Iran educational system. Method which is used، is content analysis، quantitative type. Statistical population consisted of books related to the topic in Tehran International Comparative Complex at 2013-2012. In order to do this 25 text books in that Center were examined، of course in 3 different levels، Primary، Secondary & High schools. By the use of content analysis'' check list 25 type from 5sources of the Clean & Renewable Energies'' impotency were extracted of course with 90 percent reliability. All the data estimated by SPSS statistical software، as well as، descriptive-inferential method، analyzed. Findings indicate that among those investigated text book in Tehran International Comparative Research Complex the most attentions were paid to the Clean & Renewable Energies belonged to the physic textbook of 3rd level of secondary school & least belonged to first grade Science textbook. Also، by the structural deviation of textbooks'' content can be seen the 30/3 percent resolution in the form of context، 39/4 percent in the form of fig. & 24/24 percent in the form of group class activities and the rest، respectively in the form of Home assignments & exercise and so forth represented. Among the various sources of the Clean & Renewable Energies the most attention were given to Solar Energy & the least to Geothermal. Ultimately، the achieved chi-square show the significant differences between the various sources of the Clean & Renewable Energies in textbooks'' content. At the end dealt to the main aim of this study & nine-step guidelines for implementing in Iran education system offered.
    Keywords: Curriculum, Developed Countries, The Clean, Renewable Energies
  • Reza Etemad, Mohsen Kia, Mohammad Sadegh Sepasian, Mehrdad Setayesh Nazar, Mohammad Sadegh Ghazizadeh Page 97
    Due to growing demand of the electric energy، the need to transmission expansion planning is inevitable. In this paper at first the effective criteria in transmission Expansion Planning (TEP) are determined and a novel approach for TEP is proposed. In this approach Analytical Hierarchy Process (AHP) and entropy technique are utilized for TEP. The entropy is one of the techniques that uses for weight assessment in decision making in Multi Criteria Decision Making (MCDM) model. For this purpose، five criteria are introduced and then by utilization of the Entropy-AHP (EAHP)، the optimization of TEP problem is implemented. In the first stage، the Local Marginal Price (LMP) of each bus is calculated by Optimal Power Flow (OPF) execution. In the next stage، base on the criteria that will describe، the candidate lines are determined. Finally، the EAHP is used to assign a value to each criterion and by using these values the optimal line among the candidate lines is determined. The IEEE 14 bus network is used to simulate and evaluate the effectiveness of the proposed method..
    Keywords: Transmission Expansion Planning (TEP), Multi Criteria Decision Making (MCDM), Analytical Hierarchy Process (AHP), LMP
  • Mohammad Ali Shah Hosseini, Mohammad Faghih Page 113
    Any weakness in the export of oil and gas engineering services، not only robs the opportunity of Iranian national development but also threatens it in the long term since if like today we rely on energy export and we don’t use that knowledge in order to develop engineering service outside the boarders، Iran will be the importer of energy rather than exporter. Development of such services not only provides the opportunity for energy maintenance but also enhance the countries capability to provide employment، technology development and technical science، enhancing the political relationships، and civil and cultural export. However، there are lots of efforts but still there are some obstacles. In this article according to semi-structured interviews and biblical studies from experts in a thematic analysis، a conceptual model has been devised that investigates the development of oil and gas engineering services industries. Also one of the accomplishments of this study is identification of obstacles in the three dimensions of theme، behavior and structure.
    Keywords: oil, gas, exporting, engineering services, theme, structure, behavior, thematic analysis