فهرست مطالب

نشریه انسان و محیط زیست
سال دهم شماره 2 (پیاپی 21، تابستان 1391)

  • تاریخ انتشار: 1391/04/04
  • تعداد عناوین: 6
|
  • سید ناصر سعیدی، رحیم چلداوی، سید کاظم موسوی جرف صفحه 3
    یکی از دغدقه های جامعه کنونی بشر تعادل بین تاثیرات دو مقوله حفظ سلامتی محیط زیست دریایی و فعالیت های روبه رشد و وسیع صنایع ساحلی و فراساحلی با هدف توسعه پایدار است. عدم توجه به این مسئله چه بسا منافع کوتاه مدت و سودهای اقتصادی این فعالیت ها، تحت الشعاع ضررهای بلند مدت و جبران ناپذیری گردد.در این راستا باید به این سوال پاسخ داد که منظور از یک محیط زیست دریایی سالم چیست؟ و دارای چه مولفه هایی می باشد؟ آثار منفی زیادی که بر اثر پدیده های ناشی از صنایع دریایی رخ می دهد در قالب چند بحث مهم مانند اثرات صوت، تغییرات آب و هوایی، خطر سیل، آلودگی هوا، کیفیت و مشخصه های فیزیکی و شیمیایی آب مطرح شده است. در این مقاله سعی شده است قوانین کشورهای پیشرفته که با هدف کنترل هر چه بیشتر فعالیت های دریایی وضع شده، معرفی گردد. در پایان با مقایسه آثار این گونه فعالیت ها و مفهوم محیط زیست سالم تعریف شده، استراتژی کنترلی و نظارتی تبیین می گردد
    کلیدواژگان: محیط زیست، دریا، فعالیت های دریایی، آلودگی دریا، صنایع دریایی
  • ناصر مهردادی، غلام رضا نبی بید هندی، اکبر باغوند، حمید زارع ابیانه، پویان عباسی مائده صفحه 15
    جهت بررسی کیفیت آب زیر زمینی تهران با توجه به برداشت 10 سال گذشته از پارامتر های هیدروشیمیایی مربوط به 71 نقطه مختلف از شهر تهران سه مدل مختلف شبکه عصبی مصنوعی با تعداد پارامتر های مختلف ورودی و خروجی پارامتر رسانایی الکتریکی تعریف گردید. مشاهده می شود که به جهت تخمین پارامتر رسانایی الکتریکی با سعی و خطای فراوان تابع محرک تانژانت با تابع آموزش مومنتم دارای خطای کمی خواهند بود. با کمتر کردن مقدار پارامتر های ورودی و ثابت نگه داشتن تابع آموزش به مومنتوم و تابع محرک به تانژانت و تغییرات در مقدار پردازنده های داخلی شبکه عصبی میزان خطا کاسته خواهد شد و در نهایت سه مدل با یک لایه پنهان و تابع آموزش مومنتوم و تابع محرک تانژانت ساخته شد.حداکثر خطای نتایج به دست آمده نشان دهنده میزان بیشینه ضریب تعیین برابر 0.986می باشد که مربوط به مدل های 1 و 3 با تعداد پارامتر بیشتر می باشد. همچنین با توجه به شبکه عصبی ساخته شده در یک لایه کمترین میزان کمینه ی نرمال ریشه ی میانگین مربعات خطا برابر 0.110 در مدل های 1 و 3 خواهد بود، با توجه به تعداد ورودی های کمتر مدل شماره 2 و خطاهای با تقریب بسیار نزدیک به این دو مدل با میزان بیشینه ضریب تعیین برابر 96/0 و میزان کمینه ی نرمال ریشه ی میانگین مربعات خطا برابر 176/0 تقریب بسیار مناسب و قابل قبول خواهد بود و از میزان ورودی و آزمایشات جهت اندازه گیری پارامتر ورودی کاسته خواهد شد. در بحث تاثیر گذاری پارامتر ها در پیش بینی با شبکه عصبی مشخص می شود که میزان اهمیت دو یون سولفات و کلراید با اهمیت تر از پارامتر سدیم می باشند.
    کلیدواژگان: شبکه عصبی مصنوعی، تهران، آب زیر زمینی، رسانایی الکتریکی، پیش بینی
  • مرجان حسین شاهی بندری صفحه 29
    مشکلات متعددی در زمینه تصفیه آب وجود دارد و روش های متداول جوابگوی کلیه نیازهای ما در این زمینه نبوده و ضعف و کاستی هایی دارد. لذا باید در صدد رفع این کاستی ها برآمد. تحقیق حاضر نگاهی بر آن دارد تا با استفاده از نانو تکنولوژی مشکلات رایج در زمینه تصفیه آب های سطحی، زیرزمینی و پساب ها را برطرف کند. نانوتکنولوژی مهندسی و مهارت استفاده از مواد در مقیاس نانو(nm 100-1) است. در این پژوهش چندین روش براساس نانو مورد بررسی قرار گرفت که عبارتند از:• نانوتیوب کربن(CNTs): برای حذف اکسیدهای فلزی، ترکیبات آلی و آلاینده های میکروبی• فیلتراسیون نانو یا (Nano filtration)NF: حذف یونها و کدورت درمقیاس وسیعتر، گندزایی و نرم سازی• فتوکاتالیز خورشیدی که به خاطر استفاده از نور خورشید بسیار ارزان تر از روش های معمول درتصفیه آب بوده و قابل اجرا در مناطق فاقد جریان برق نیز هست.
    • Tio2 (Titanium Dioxide): برای حذف ارگانیسم هایی مثل کلاستریدیوم که در مقابل کلر مقاوم است بسیار کارآمد است.
    همچنین با کمک نانوتکنولوژی می توان فلزات سنگین، حشره کش ها، علف کش ها، باکتری ها، نیترات، ارسنیک و.. . را از آب های سطحی،زیرزمینی و پساب ها حذف کرد.نتایج حاصله نشان دادند که استفاده ازکلیه روش های ذکر شده بر اساس نانو در تصفیه آب این امکان را می دهد که منابع آبی را حفاظت کرده و کیفیت آن را بهبود بخشیده و نقایص روش های متداول را برطرف سازیم. به جرات می توان گفت که نانو تکنولوژی نه تنها کلیه مشکلات موجود در صنعت آب را برطرف می سازد، بلکه بسیار مقرون به صرفه بوده و در هر محلی حتی مناطق دور از دسترس وفاقد جریان برق نیز قابل اجراست.
    کلیدواژگان: جاذب های نانو، کاتالیزورهای نانو، نانوتیوب کربن، غشاهای نانو
  • هدی سادات حسینی، تورج دانا، رضا ارجمندی، ایمان شیریان پور صفحه 35
    توسعه از یک سو با صنعت و تکنولوژی و از سوی دیگر با تخریب و آلودگی ارتباط تنگاتنگ و ارگانیک دارد، با این وجود دیگر نمی توان متوقع بود که همراه با توسعه صنعتی که از ملزومات پیشرفت علمی و اقتصادی بشر است محیط زیست دست نخورده باقی بماند.امروزه ارزیابی ریسک محیط زیستی به عنوان ابزاری کارآمد در مطالعات مدیریت ریسک محیط زیستی پروژه هایی که از نیروی تخریب بالایی برخوردارند مطرح است.سکوهای نفتی، یک سازه عظیم همراه با حفر چاه نفت، استخراج نفت و فرآوری آن می باشند لیکن ساخت آن سکوها با توجه به ریسک پذیری بالا می تواند آثار چشم گیری بر محیط زیست بر جای گذارد، بنابراین نیازمند مطالعات مستمر است. تحقیق پیش روی با هدف مدیریت ریسک محیط زیستی ساخت سکوهای میدان نفتی رشادت (متشکل از سکوی Q4، W0، W4، P4) در کارخانه فراساحل واقع در جزیره صدرای بوشهر به جهت کاهش اثرات سوء و ارایه راهکارهای مدیریتی طرح رشادت انجام پذیرفته است. در این تحقیق به منظور ارزیابی ریسک محیط زیستی فعالیت های فاز ساخت سکوهای نفتی طرح رشادت از روش سامانه شاخص گذاری استفاده گردید. سامانه شاخص گذاری روش جامع و کاربردی است که براساس تعیین شاخص اهمیت، اثر و تواتر رخداد فعالیت بنیان گذاری شده است. به جهت اجرای این روش ابتدا فعالیت های موجود در سایت عملیاتی به طور کامل شناسایی گردیدند، سپس تاثیر فعالیت های مختلف شناسایی شده بر روی جنبه های محیط زیستی(آلودگی هوا، آلودگی آب، آلودگی خاک، صوت، پسماند و انسان) مورد بررسی قرار گرفت پس از آن با استفاده از سامانه شاخص گذاری(حاصلضرب سه فاکتور اهمیت، اثر و تواتر رخداد فعالیت) میزان اعداد الویت ریسک برای هر کدام از فعالیت ها محاسبه شد و در انتها با توجه به نظرات متخصصان، راهکارهای مدیریتی به منظور کاهش میزان ریسک فعالیت ها ارایه و اعداد الویت ریسک پس از اقدامات اصلاحی محاسبه گردید براساس یافته های پژوهش، میزان ریسک های کم 44/23%، میزان ریسک های متوسط 7/67% و ریسک های بالا86/8% بود و با توجه به اقدامات کنترلی و اصلاحی ارایه شده توسط متخصصان میزان ریسک های کم به میزان 15/67% افزایش، ریسک های متوسط به میزان 69/57% و میزان ریسک های بالا به میزان 100% کاهش یافت.
    کلیدواژگان: مدیریت ریسک زیست محیطی، اعداد الویت ریسک، جنبه های زیست محیطی
  • فاطمه عین الهی پیر، ساحل پاکزاد توچایی صفحه 57
    هدف از انجام مطالعه، تعیین غلظت فلز مس در کاهوی وحشیLactuca serriola، درمنه Artemisia sieberi و گون Astragalus bisulcatus در اطراف معدن ذوب مس خاتون آباد و مقایسه غلظت ها با استانداردهای موجود بود.
    نمونه برداری از گیاهان از فواصل 300، 600 و 1000 متری در جهت شمالی کارخانه در فروردین ماه 1389 انجام شد. نمونه های برداشت شده به آزمایشگاه منتقل گردیدند و پس از آماده سازی توسط Hot plate digester هضم شدند و غلظت فلز مس نمونه ها توسط دستگاه جذب اتمی Konic مدل NOVAA 300 اندازه گیری شد.
    غلظت فلز مس درکاهوی وحشی، درمنه و گون نیز به ترتیب 33/5-59/17، 17/5 - 46/19 و 47/5 – 73/12 میکروگرم بر گرم اندازه گیری شد. بیشترین و کمترین غلظت فلز مس در تمامی نمونه ها به ترتیب در فاصله 1000 متری و 300 متری معدن به دست آمد.
    افزایش غلظت فلز مس با افزایش فاصله از کارخانه می تواند ناشی از جهت حرکت باد، وزن کم ذرات حاوی مس، ارتفاع دودکش کارخانه و عدم جذب ذرات ریز توسط میکروفیلتر دودکش معدن باشد. غلظت فلز مس از حد مجاز تعیین شده برای مصرف روزانه دام در مرتع بیشتر بود. بنابراین لازم است میزان غبار حاوی مس دودکش کارخانه کاهش یابد.
    کلیدواژگان: فلز مس، گیاهان مرتعی، Lactuca serriola، Artemisia sieberi، Astragalus bisulcatus، معدن ذوب مس خاتون آباد شهربابک
  • حمیده ثمری جهرمی *، حسن حسین زاده اصل صفحه 67

    مکان یابی جایگاه های مناسب دفن پسماند از اقدامات مهم در فرایند مدیریت جامع پسماندهای جامد شهری است. در فرایند مکان یابی می بایست معیارهای مختلفی مورد ملاحظه قرار گیرد. بنابراین کاربرد روش هایی که قادر به تامین معیارهای مورد نظر می باشند ضروری است. این تحقیق با هدف تعیین مکان های مناسب دفن پسماند شهری شهر بندرعباس با استفاده از مدل تحلیل سلسله مراتبی (AHP) به منظور ارائه راهکارهای بهینه در مکانیابی اجرا شده است. در این تحقیق از معیارهایی نظیر کاربری اراضی، خطوط ارتباطی، فاصله از مراکز شهری و منابع آبی برای مکانیابی محل دفن پسماند شهر بندرعباس استفاده شده است. وزن هریک از معیارها با استفاده از روش AHP محاسبه می شود.با انجام بازدیدهای میدانی ازمیان مکان های مناسب، چهار مکان برای مقایسه و ارزیابی از طریق فرایند AHP مشخص شدند که نهایتا با انجام مطالعات دقیقتر بر روی مکانهای انتخاب شده واعمال وزن های مناسب به هریک از مکان ها، محل دفن نهایی، شمال غرب شهرستان بستک انتخاب گردید.

    کلیدواژگان: مکان یابی، پسماند، محل دفن، AHP
|
  • Sayed Naser Saeidi, Rahim Cheldavi, Sayed Kazem Mousavi Jorf Page 3
    One of the main concern of today human society is the equilibrium between the effect of two categories that are healthy of marine environment and shore and off-shore wide activity, subjected to sustainable development, although ignoring this issue may have short time economic profits and advantage, but this result in long term irreparable losses. however these questions what the purpose of a healthy marine environment is, and what components have should be answered.Marine industries cause to bad effect include some important issues such as noise effects, climate changes, flood risk, air pollution, quality and physical and chemical features of water. In this study we try to introduce those acts that are applied to control marine activities in developed countries. Finally by contrast of these activities and concept of health environment, the controling and monitoring strategy will be suggested.
    Keywords: environment, sea, marine activities, marine pollution, marine industry
  • Naser Mehrdadi, Gholam Reza Nabi Bidhendi, Akbar Baghvand, Hamid Zare Abyaneh Pouyan Abbasi Maedeh (Corresponding Author) Page 15
    In an attempt to examine the quality of ground water in Tehran with respect to the consumption pattern in the last ten years for 71 examination point, three distinct neural networks of different Electrical Conductivity (EC), input and output parameters were set out. It is observed that, in order to forecast with a great deal of trial and error, the tangent algorithms with the momentum-training algorithm turns out to be less error. As the number of the input parameters is reduced and the training algorithm is fixed with momentum and the stimulating algorithm gives way to the tangent algorithm, error falls off. Finally, three model with one hidden layer, the momentum training algorithms and the stimulating tangent was constructed. The maximum error occurring implies the maximum determination coefficient of 0.986 that its connected to models 1 and 3. Moreover, in line with the neural network laid out in one layer, the minimum normal root mean square error (NRMSE) is supposed to run out at 0.110 in models 1 and 3. According to lesser input parameter of model number 2 and very close approximation to this two models (1and 3) with maximum determination coefficient of 0.96 and the minimum normal root mean square error (NRMSE) 0.176 can be a very close approximation and can decrease inputs parameters and experience for Measurement of input parameters and the estimate is supposed to be excellently acceptable. As regards the effect of the parameters on the forecast made, the neural network involves the predominance of the two sulphate and chloride ions over the sodium parameter.
    Keywords: Neutral network, Tehran, Ground Water, Electrical Conductivity, Predict.
  • Marjan Hossein Shahi Bandari Page 29
    There are several problems in water treatment and current methods are not responder to our demands in this field and they have weakness and shortage. Thus we should remove these defects. This article gives a brief overview of the use of nanotechnology to solve the common problems in surface water, ground water and wastewater treatment. Nanotechnology is the engineering and art of manipulating matter at the nanoscale (1-100 nm). This research examined several procedures based on nano:- Carbon nanotube (CNTs): for removal metal oxides, organic pollutants and biological contaminants.- Nanofiltration: Removal ions and turbidity in larger scale, disinfecting and softening.- Solar photocatalyze which is much cheaper than common methods in water purification and is executable in remote regions without electricity.- Tio2(Titanium Dioxide): is very efficient in removal organisms such as Clostridium which is resistant against Chlorine.Also it is possible to remove heavy metals, insecticides, herbicides, bacteria, Arsenic,. ..from surface water, ground water and wastewater by Nanotechnology. Conclusion showed that using all mentioned methods based on Nano in water treatment, gives the opportunity for protecting water supplies and improving its quality and eliminates current methods defects.Nanotechnology not only solves all these problems, but also is inexpensive and executable in everywhere even in remote regions, which are without electricity.
    Keywords: Nanosorbents, Nanocatalysts, carbon nanotube, Nano membranes
  • Hoda Hosseini (Corresponding Author), Tooraj Dana, Reza Arjmandi, Shirianpour, Iman Page 35
    Development in industries and technology on one hand and polluting the environment on the other hand are being interconnected, however we cannot expect industrial development which is necessary for science and economic improvement of human kind without destroying and effecting parts of environment. Oil field are giant structure with drilling, extraction and processing of oil but making them can significant affect on the environment due to taking risk therefore is required continiuos research. Current research was undertaken with the aim of environmental risk management for construction of Reshadat oil field platforms (comprised of four platforms Q4, W4, W0, and P4) in Farasahel Company that is located in Sadra Island. For this purpose after identifying different activities available in site, effects of these activities on the environmental aspects were analyzed and finally priority risk value for each activity was calculated by considering 3 important factors such as importance, effects and frequency. Upon various Calculations it was determined that 67.7% environmental risks were moderate, 23.44% were on low risks and 8.86% were categorized as high risk activities. Upon presenting corrective management action in order to reduce and control amount of environmental risks, secondary assessment was performed. Due to corrective measurement moderate risks 57.69% and low risks 67.15% and 100% of high risks activities were eliminated.
    Keywords: Environmental Risk Management, Risk Priority Number, Environmental Aspects.
  • Fatemeh Einollahi Peer (Corresponding Author), Sahel Pakzad Toochaei Page 57
    The aims of this study were survey of Cu concentration in some grassland plants including, Lactuca serriola, Artemisia sieberi and Astragalus bisulcatus around the Khatoon Abad melting and compared the Cu concentration in samples with available standards.Samples of plants were collected from 300, 600 and 1000m distances from melting area in April 2010. Samples were transferred to the laboratory, prepared and then digested with hot plate digester. Cu concentration was measured in samples with Konic Wonm 300 atomic absorption spectrophotometer.The Cu concentration in Lactuca serriola, Artemisia sieber and Astragalus bisulcatus was measured 5.33-17.59, 5.17-19.46 and 5.47-12.73 µg/gdw respectively. In all samples, highest concentration of Cu was measured in 1000m and lowest concentration of Cu was calculated in 300m distance from melting area. Similarly, the highest and lowest concentrations of Copper in all samples were obtained in 1000m and 300m distance from melting area respectively.High concentration of Cu with increasing the distance from melting area could be due to wind direction, weight of particles containing of Copper, height of chimney and not absorbed of some smallest particles with micro filter was embedded in the chimney. According to some available standards, Cu concentration was low in soil. Consequently, the particles containing of Copper must reduced from the chimney of melting Copper mine.
    Keywords: Cu, Lactuca serriola, Artemisia sieber, Astragalus bisulcatus, Khatoon Abad melting mine, Shahr Babak
  • Hamideh Samari Jahromi (Corresponding Author), Hassan Hosseinzadehasl Page 67

    One of the main parts of management in the urban solid wastes is finding an appropriate place in order to dispose the wastes. Difference criteria should be paid attention in site selection, so using of special methods are necessary to assimilate the criteria. This study was done to locate the appropriate landfills in the city of Bandarabbas through using Analytical Hierarchy Process (AHP) for offering the optimal alternatives for site selection. In present study, in order to select sites for dispose of urban waste of Bandarabbas, the following data layers and maps have been utilized; the maps of land use, road network, water source, and the layers related to the distance from city center. In next step, each layer (criteria) weights are calculated by using the AHP. Through field visits, four locations for comparison and evaluation through hierarchical analysis process were selected and ultimately by doing closer studies on the selected locations and exerting appropriate weights on each of the locations, the final location will be selected. Finally, an appropriate location for landfill, North West Bastak was selected.

    Keywords: site selection, solid waste, landfill, AHP