فهرست مطالب

مجله پژوهش فیزیک ایران
سال هفدهم شماره 4 (پاییز 1396)

  • تاریخ انتشار: 1396/10/25
  • تعداد عناوین: 20
|
  • مریم اشرفی * صفحات 73-79

    یکی از ویژگی های نظریه میدان همدیس در دو بعد ناوردایی تابع پارش تحت تبدیل های آجری است. با به کار گیری ناوردایی آجری تابع پارش، مجموعه ای از قیود روی مشتقات تابع پارش (در یک نقطه خاص) به دست آمده است. این مجموعه از قیود بسط دمای متوسط نامیده می شود. اخیرا، برای نظریه هایی که بار مرکزی چپ و بار مرکزی راست در آنها بزرگ تر از یک است، با استفاده از بسط دمای متوسط برای مشتق های مرتبه اول و مرتبه سوم، کران بالا روی بعد همدیس میدان های اولیه، به دست آمده است. به منظور بهبود این کران بالا، روش تابعک خطی در نظریه هایی که تنها تقارن دستیده در آنها، تقارن ویراسورو است، به کار گرفته شده است. در این مقاله با برداشتن این قید که تقارن ویراسورو تنها تقارن دستیده در نظریه باشد، و به کار گیری بسط دمای متوسط با در نظر گرفتن مرتبه دلخواه مشتق گیری، کران بهتری روی بعد همدیس اولین میدان اولیه به دست می آوریم. نشان خواهیم داد که کران بالا به مرتبه مشتق گیری بستگی دارد. در این مقاله به مطالعه مقدار بهینه مرتبه مشتق گیری که توسط آن کران بالای بهتری به دست می آید، می پردازیم.

    کلیدواژگان: نظریه میدان همدیس، ناوردایی آجری، بسط دمای متوسط، میدان اولیه
  • حمیده ذالیانی *، مجید جعفر تفرشی، داریوش سوری صفحات 81-87

    در کار حاضر، بلورهای KTP به روش هسته بندی خود به خودی در محیط فلاکس با استفاده از فلاکس K6P4O13 رشد یافته اند. در فرایند هسته بندی خود به خودی، آهنگ های سرمایش در گستره C/h °4/0 تا C/h °1 اعمال شده اند. حضور و میزان ناخالصی ها با استفاده از XRF تعیین شده است. طیف عبوردهی نوری بلورهای KTP ناخالص در ناحیه فرابنفش- مرئی مورد بحث واقع می شود. علاوه بر کاهش سریع جذب با افزایش طول موج، قطع عبوردهی در لبه جذب نوری به وضوح مشهود است. نشان داده می شود که حضور ناخالصی لبه جذب را به انرژی های بالاتر انتقال می دهد. وابستگی طول موجی ضریب جذب α در گستره فرابفش- مرئی تعیین می شود و مشخصه های لبه جذب نوری بحث می شود. نتایج نشان می دهند که لبه جذب و نوع گذار نوری حامل بار را می توان در نمونه های مورد مطالعه به گذار غیرمستقیم نسبت داد. نشان داده می شود که حضور ناخالصی، گاف نواری غیرمستقیم (Eg) بلورهای KTP را کاهش می دهد و باعث میل لبه جذب به سمت انرژی های کم می شود. همچنین، مشخصه نگاری ساختاری با به کارگیری XRD و تحلیل IR انجام شد که موید رشد بلور KTP می باشد.

    کلیدواژگان: روش هسته بندی خود به خودی، بلورهای KTP، گاف انرژی، طیف عبوردهی، روش فلاکس
  • میترا قرقره چی *، اسفندیار مهرشاهی، حسام احمدی صفحات 89-92

    در این مقاله روش نوینی برای توصیف فیزیکی ناحیه فضایی بار در یک دیود صفحه ای ارائه شده است. با توجه به این که در این روش از رویکرد حوزه زمان استفاده شده است، رفتار گذرای مسئله قبل از رسیدن به حالت پایدار به عنوان نتیجه ای از روش قابل دسترسی است. با فرض ورود الکترون ها با سرعت اولیه صفر، توزیع پتانسیل و جریان به دست آمده از این روش تطابق کامل با نتایج دیگر محققان دارند. همچنین، اعمال روش برای ورود الکترون با سرعت غیرصفر نیز نتایجی موافق با کارهای قبلی دارد.

    کلیدواژگان: ناحیه فضای بار، جریان محدوده فضای بار، دیود صفحه ای، سرعت اولیه
  • ردا تانتوای *، تارک ناسار صفحات 93-101

    فرمالیزم پارامتر تاثیر تقریب های جفت شدگی تک مرکزی بورن درجه اول و دوم برای بررسی برانگیختگی های مستقیم یون های ((26)+He) و لیتیوم ((26)++Li) در برخورد با پروتون یا پاد پروتون به کار گرفته شد. سطح مقطع برانگیختگی های مقیاس بندی شده s 3، 3p و d 3 در محدوده انرژی مقیاس بندی شده (2 تا 1000 keV) محاسبه شد. هدف از تحقیق حاضر، بررسی حساسیت سطح مقطع در سازوکار های انتقال الکترونیکی مختلف در رویکرد های مورد مطالعه و نیز بار هر پرتابه و هسته هدف است. همچنین، سطح مقطع های حاصل از سطح مقطع های محاسبه شده در محاسبات نظری قبلی مقایسه شد

    کلیدواژگان: سطح مقطع برانگیختگی مستقیم مقیاس بندی شده، بسط جفت شدگی تک مرکزی، تقریب بورن، یون های ((26)+He)، یون های ((26)++Li)، پروتون، پاد پروتون
  • ردوانه لمسعودی *، سلاح الدین البهار، محمد ابن الشیخ صفحات 103-108

    در این تحقیق، عبارات تحلیلی عامل شکل در مورد ذره مکعبی در تقریب WKB تعیین شد. برخی متغیرها از قبیل پارامتر اندازه، ضریب شکست و زاویه پراکندگی تطبیق داده شد و عامل شکل در تقریب ریلی گانز- دبای (RGD) وانکسار غیرعادی مشخص شده و فاکتور کارایی انهدام تعیین شد. در نهایت، برای مصور کردن سازو کار، چند نمونه عددی تحلیل شد.

    کلیدواژگان: پراکندگی، عامل شکل، ذره مکعبی، تقریب WKB
  • ایوب خاتونی، فائزه رحمانی*، فریدون عباسی دوانی صفحات 109-117

    یکی از نیازهای صنعت امروزی بررسی وتعیین برخط نشتی لوله های حامل سیالات و گازها می‏باشد. در این مقاله با استفاده از کد شبیه‏سازی مونت کارلوی MCNP به بررسی تعیین مقدار نشتی سیالات، با استفاده از ردیاب پرتویی پرداخته شده است. آرایه آشکارسازی شامل دو آشکارساز NaI(Tl) قبل و بعد از محل نشتی برای اندازه گیری گامای گسیل شده از ردیاب پرتوی استفاده می شود. پس از درجه بندی کردن آشکارسازهای تابشی، مقدار نشتی از اختلاف شمارش سطح زیر نمودار آشکارسازهای تابشی تعیین می‏شود. همچنین عوامل موثر بر تعیین میزان نشتی قابل تشخیص اعم از تاثیر جنس، ضخامت، قطر لوله، نوع سیال داخل لوله و ابعاد کریستال آشکارساز تابشی، فعالیت و نوع‏ ردیاب (99mTc، 113mIn، 131I، 82Br، 24Na مورد بررسی قرار گرفته اند. بر اساس نتایج حاصل از شبیه‏سازی، به عنوان مثال مقدار نشتی بیش از 007/0 % از حجم سیال بنزین ورودی لوله آهنی با قطر 4 اینچ، ضخامت 5/0 سانتی‏متر، با استفاده از آشکارساز با کریستال 3×3 اینچی و ردیاب سدیم با فعالیت 100 میلی‏ کوری قابل تشخیص می‏باشد.

    کلیدواژگان: نشتی، ردیاب پرتوی، MCNPX 2-7e، ) NaI(Tl، خط لوله
  • محمد امیرحمزه تفرشی*، داریوش رستمی فرد، علی نصیری صفحات 507-512
    این مقاله با استفاده از داده های تجربی و شبیه سازی شده دو دستگاه پلاسمای کانونی نوع فیلیپوف با اندازه های کوچک و بزرگ، تهیه شده است. در قسمت اول مقاله، موضوع کانونی شدن پلاسما مطرح گردیده و پارامترهای دو دستگاه معرفی شده اند. پس از آن نتایج بررسی های تجربی در زمینه وابستگی زمان تنگش پلاسما به فشار گاز ارائه شده است. در قسمت بعدی مبانی نظری مدل ام- ال مرور شده و سپس نتایج حاصل از کاربرد این مدل در شبیه سازی دو دستگاه ارائه شده است. هم نتایج تجربی و هم نتایج شبیه سازی نشان دادند که در دستگاه بزرگ تر، حساسیت زمان تنگش پلاسما به تغییرات فشار گاز به وضوح بیشتر است. این پژوهش همچنین نشان داد که احتمالا پیش بینی های مدل ام- ال، برای دستگاه بزرگ تر، دقیق تر از پیش بینی های آن برای دستگاه کوچک تر است
    کلیدواژگان: پلاسمای کانونی، فیلیپوف، مدل ام-ال، فشار گاز، زمان تنگش
  • محمد وحید دستجردی*، سید جبار موسوی، محمود سلطان الکتابی صفحات 513-522
    سختی سطح، یکی از ویژگی های مهم آلیاژ ها می باشد که اندازه گیری آن با روش های مکانیکی مرسوم با چالش هایی همراه است. در این پژوهش ما از بیناب نمایی فروشکست القایی لیزری (LIBS) به عنوان یک روش جایگزین برای روش های مکانیکی مرسوم برای اندازه گیری سختی سطح آلیاژهای مختلف، استفاده کردیم. پس از ثبت بیناب مربوط به نمونه های آلیاژی به منظور شناسایی سختی سطح نمونه های مورد بررسی از روشkنزدیکترین همسایه (KNN) استفاده شد که نتایج نشان داد روش LIBS-KNN قابلیت تفکیک و شناسایی سختی سطح نمونه ها را با دقت 3/93 % دارد. همچنین رهیافت درجه بندی به منظور تشخیص در صد عناصر سازنده آلیاژها و همچنین سختی سنجی آنها مورد بررسی قرار گرفت که نتایج این پژوهش در این رابطه نشان داد که رابطه خطی مناسبی بین خطوط گسیلی ثبت شده از بیناب LIBS نمونه های آلیاژی و در صد عناصر سازنده آلیاژها و عدد سختی ویکرز نمونه ها وجود دارد. بنابراین با توجه به مزایای منحصر به فرد روشLIBSهمچون آنالیز سریع و غیر مخرب و قابلیت سیار بودن، می توان برخی از مشکلات روش های سختی سنجی مکانیکی مرسوم را حذف کرد.
    کلیدواژگان: بیناب نمایی فروشکست القایی لیزری، سختی فرورفتگی، آلیاژ ها
  • مهرداد حسینی*، احمد کیاست پور صفحات 523-530
    در این پژوهش که برای نخستین بار درکشور تحت نظارت مرکز نجوم ادیب اصفهان انجام شده است، طراحی و ساخت دستگاه تصویربرداری و ردگیر خورشیدی به منظور کاربردهای تحقیقاتی و طیف سنجی، ارائه شده است. دستگاه تصویربردار مذکور که قابلیت استفاده به عنوان تلسکوپ1، اسپکتروسکوپ2، اسپکتروفوتومتر3 و اسپکتروهلیوسکوپ4 را دارا می باشد، در مراحل تست و ارزیابی داده های حاصل شده، کارایی قابل قبولی را کسب کرده است. داده های حاصل شده از این دستگاه به منظور تحقیق در زمینه های متعدد فیزیک، از جمله بررسی طیف های جذبی خورشید و عناصر روی سطح آن، گذر سیاره ها از مقابل خورشید، اثرات دوپلری5، ارزیابی خطوط فرانهوفر، نمودار شدت بر حسب طول موج و بررسی شراره های خورشیدی، انطباق قابل قبولی را با نتایج تئوری دارا است. در این پژوهش گزارش طراحی و ساخت دستگاه مذکور به همراه پاره ای از نتایج حاصل شده ارائه شده است.
    کلیدواژگان: اسپکتروهلیوسکوپ، اثرات دوپلری، خطوط فرانهوفر، طیف سنج
  • امید خانی*، مرتضی زرگر شوشتری، محمد جزیره پور، منصور فربد صفحات 531-540
    در مقاله حاضر، خصوصیات ساختاری و قابلیت جذب امواج میکروی نانوذرات آهن و نانوذرات هسته- پوسته آهن- کربن مورد مطالعه قرار گرفته است. نانوذرات مورد مطالعه با استفاده از روش هیدروترمال و با احیای نانوذرات هماتیت در حین عملیات حرارتی در محیط آرگون- هیدروژن تولید شدند. گذار فاز هماتیت به آهن در فرایند احیاء با استفاده از الگوهای پراش پرتو ایکس مورد بررسی قرار گرفت. نتایج الگوهای XRDحاکی از آن هستند که گذار فاز هماتیت به آهن در مورد نانوذرات آهن، پس از 30 دقیقه حرارت‏دهی تکمیل می‏شود ولی درباره نانوکپسول‏ های آهن- کربن زمان مورد نیاز برای تکمیل گذار فاز 65 دقیقه است و قبل از آن، فاز ناخالصی ووستیت (FeO) همچنان در الگوهای پراش قابل مشاهده است. حلقه‏ های پسماند مغناطیسی و طیف‏ های تراوایی مغناطیسی و گذردهی الکتریکی نانوذرات آهن و نانوکپسول‏ های Fe-C نیز مورد مطالعه قرار گرفتند. بررسی طیف‏ های ε و μدر بازده بسامدی GHz 1-18نشان داد که ایجاد پوشش کربن بر خواص امواج میکروی نانوذرات آهن تاثیرگذار است و منجر به کاهش گذردهی الکتریکی و تراوایی مغناطیسی در کامپوزیت‏ های حاوی نانوذرات آهن می‏گردد
    کلیدواژگان: نانوذرات هسته-پوسته آهن-کربن، روش هیدروترمال، گذار فاز هماتیت-آهن، جاذب امواج مایکروویو
  • سعیده لطیف*، حسین صفری، اسدالله صفایی صفحات 541-551
    مقاله حاضر به معرفی آنالیز طیفی بیزی به عنوان روشی قدرتمند و کارآمد جهت تحلیل طیفی سری های زمانی نورسنجی می پردازد. برای این منظور، آنالیز طیفی بیزی برای سری زمانی نورسنجی XZ Dra که به صورت غیر یکنواخت همراه با گاف های بزرگ است، در نرم افزار متلب برنامه نویسی شده و طیف توانی حاصل از این آنالیز با طیف توانی به دست آمده از نرم افزار 04Periodکه جهت تحلیل آماری سری های زمانی نجومی طراحی گردیده و از داده های مصنوعی برای یکنواخت کردن آنها بهره می برد، مقایسه شده است. اگر چه در طیف توانی حاصل از این نرم افزار قله طیفی اصلی که بیانگر بسامد اصلی نوسانات ستاره متغیر XZ Dra در (روز1-) 09864/2 = f است به خوبی شناسایی شده، اما قله های طیفی کاذب نیز دیده می شوند. همچنین در این نرم افزار نحوه تولید داده مصنوعی به طور دقیق مشخص نشده است. در طیف توانی حاصل از آنالیز بیزی این قله های کاذب حذف گردیده اند، ضمن آنکه قله طیفی مذکور حول بسامد مورد نظر دارای عرض کمتری بوده و دقیق تر است. لازم به ذکر است که در آنالیز طیفی بیزی جهت به دست آوردن طیف توانی مطلوب، احتیاج به یکنواخت کردن سری زمانی نیست؛ ضمن آنکه، پژوهشگر نیز در جریان روند دقیق محاسبات قرار می گیرد.
    کلیدواژگان: آنالیز طیفی بیزی، تئوری بیز، نرم افزار Period04، طیف توانی، ستاره متغیر، منحنی نوری
  • علی مرادیان *، رضا ستاره، ئه سرین سیدزاهدی صفحات 553-560
    در این مقاله یک نانوسیستم کازیمیری مرکب از دو قرص دی الکتریک مجزا را که هوا در فاصله بین آنها قرار دارد، مورد بررسی قرار می دهیم. هر کدام از قرص ها دارای نواحی دی الکتریک چهارگانه هستند و نواحی یکسان آنها در مقابل یکدیگر قرار گرفته اند. با استفاده از رهیافت پراکندگی در حد جفت شدگی ضعیف نشان می دهیم که اگر قرص بالایی به اندازه زاویه حول محور خود دوران کند، قرص پایینی یک گشتاور را تجربه می کند. در ادامه دینامیک این سیستم را در حضور بار خارجی بررسی می کنیم و سرعت زاویه ای میانگین غیر صفر را برای قرص بالایی به دست می آوریم
    کلیدواژگان: نانو سیستم کازیمیر، دی الکتریک، یکسویه سازی، روش پراکندگی
  • سعید صفا، میلاد اصغری، سعادت محتاری، روح الله عظیمی راد * صفحات 561-571
    در این مقاله، نانومیله های اکسیدروی پوشیده شده به وسیله لایه اکسیدروی با غلظت های مختلف آلاینده کروم (5/4 - 0) درصد، به روش هیدروترمال ساخته شدند. پاسخ حسگری این نمونه ها به عنوان حسگر بخار اتانول بررسی شد. مورفولوژی نمونه های ساخته شده توسط میکروسکوپ الکترونی FESEM بررسی شد. این تصویربرداری نشان داد که استفاده از لایه پوششی موجب افزایش ضخامت نانومیله های اکسیدروی می شود. وجود کروم در ساختار نانومیله های اکسیدروی توسط آنالیز طیف سنجی پراش انرژی پرتو ایکس (EDS) تایید شد. بر اساس الگوی پراش پرتو ایکس (XRD) مشخص شد که نمونه های ZnO:Cr دارای ساختار ورتزیت می باشند، همچنین نشان داده شد که افزودن کروم ساختار بلوری اکسیدروی را تغییر نداد. اندازه گیری های الکتریکی نشان داد که افزودن کروم موجب کاهش جریان می شود، درحالی که جریان در نمونه با 5/4 درصد ناخالصی افزایش یافته است. این کاهش جریان می تواند به دلیل حضور یون های Cr3+ باشد، زیرا حضور این یون ها منجر به کاهش حامل های بار می شود. علاوه بر این، به دلیل خواص کاتالسیتی کروم و پایین بودن انرژی یونیزاسیون کروم نسبت به روی، مشاهده شده که آلاینده کروم موجب بهبود حساسیت آشکارسازی می شود و همچنین دما، عملکرد بهینه را نیز کاهش داد. در میان همه نمونه ها بیشترین میزان حساسیت (14) به ازای غلظت 5/1 درصد کروم برای بخار اتانول ppm 500 در دمای بهینه (°C250) به دست آمد. در واقع با پوشانیدن نانومیله ها توسط یک لایه اکسیدروی، این نمونه ها زبرتر شدند که در نتیجه آن مکان های مناسب بر روی نانومیله جهت جذب و تجزیه مولکول های گاز افزایش یافت.
    کلیدواژگان: نیمه هادی، نانوساختار، اکسید فلزی، ساختار هسته-پوسته
  • میثم دانشور *، علی رستم نژادی صفحات 573-583
    در این تحقیق ساختار نواری، خواص اپتیکی و طیف تابش گرمایی بلور فوتونیکی دوبعدی سیلیکونی حفره ای با ساختار شش گوشی محاسبه شده است. ساختار نواری، نقشه و اندازه گاف نواری به روش بسط امواج تخت بر حسب شعاع محاسبه شده است. برای این بلور فوتونیکی با ثابت شبکه a، بیشینه گاف قطبش های TE و TM و بیشینه گاف کامل به ترتیب 51%، 20% و 17% و مربوط به شعاع های a43/0 و a50/0 و a48/0 می باشد. با محاسبه طیف جذب به روش FDTD و با استفاده از قانون کیرشهف، طیف تابش گرمایی در ناحیه m 1μتا m 10μ محاسبه شده است. نتایج به دست آمده نشان می دهد که با تنظیم پارامترهای هندسی شبکه، می توان ساختار نواری بلور فوتونیکی سیلیکونی را مهندسی نمود و طیف تابش گرمایی را به نحوی کنترل نمود که در سیستم های ترموفوتوولتایی قابل استفاده باشد.
    کلیدواژگان: بلور فوتونیکی سیلیکونی، ساختار نواری، گاف نواری، خواص اپتیکی، تابش گرمایی
  • فریبا مسعودی، حمید مصدق * صفحات 585-594
    بر اساس بررسی های جدیدی که نشان دهنده وجود برهم کنش ژیالوشینسکی- موریا در مادهBi3Mn4O12(No3 است، در این مقاله به بررسی اثر این برهم کنش بر روی نظم های مغناطیسی مدل هایزنبرگj1-j2 پادفرومغناطیس شبکه لانه زنبوری پرداخته ایم. مطالعه مدل را با روش کلاسیکی لاتینجر- تیزا شروع می کنیم. در این تقریب کلاسیکی سیمای فاز به دو ناحیه تقسیم می شود. برای نواحی که 6/(J2 <1+D2 /مدل دارای نظم نل پیچیده شده است و برهم کنش ژیالوشینسکی- موریا باعث پیچش اسپین های یکی از زیرشبکه می شود. اما برای نواحی که6/(J2 >1+D2 مدل دارای واگنی است و بی نهایت بردار پیچش وجود دارد که می توانند مدل را کمینه کنند. وجود این ناحیه در سیمای فاز به دلیل افزایش احتمال وجود فاز مایع اسپینی کوانتومی بسیار مهم است. برای بررسی اثر افت و خیزهای کوانتومی بر روی پایداری فازهای کلاسیک به دست آمده، از روش موج اسپینی خطی هولشتاین- پریماکوف استفاده می شود. نتایج به دست آمده نشان می دهد که در ناحیه واگنی که 2/(J2 >1+D2، وارد کردن افت و خیزهای کوانتومی باعث ایجاد نظم در دستگاه اسپینی می شود. اما برای2/(J2 کلیدواژگان: برهم کنش ژیالوشینسکی- موریا، مدل هایزنبرگ پادفرومغناطیس
  • احمد مهرابی *، حبیب خسروشاهی، هادی رحمانی صفحات 595-601
    در یک رویداد همگرایی گرانشی، هنگام عبور چشمه از خط سوزان، نور لکه روی ستاره می تواند چندین مرتبه بیشتر نسبت به خود ستاره تقویت شود. این اختلاف تقویت نور زمان مناسبی برای آشکار سازی اندازه میدان مغناطیسی روی ستاره فراهم می آورد. در این مقاله به بررسی امکان آشکار سازی میدان مغناطیسی به وسیله اثر زیمان1 در زمان عبور چشمه از خط سوزان خواهیم پرداخت. با استفاده از آنالیز فوریه می توان سایر عوامل ایجاد جابه جایی در طیف ستاره را شناسایی و جابه جایی در اثر زیمان را مجزا کرد. در مرحله بعد با استفاده از فرمول بندی ریزهمگرایی گرانشی میزان اختلاف تقویت نور لکه و ستاره را محاسبه کرده و با استفاده از دو استراتژی رصدی و روش مونت کارلو، امکان آشکار سازی میدان مغناطیسی را مطالعه می کنیم. دقت طیف سنجی و میزان سیگنال به نوفه در هر استراتژی مشخص کننده میدان های مغناطیسی قابل مشاهده است.
    کلیدواژگان: ریزهمگرایی گرانشی، میدان مغناطیسی ستاره ای، طیف سنجی
  • محسن خاکزاد * صفحات 603-607
    در این مقاله اندازه گیری انحصاری1 جفت پایون در برخوردهای پروتون- پروتون معرفی شده اند که در این رویدادها، پروتون ها شکسته نمی شوند. این اندازه گیری در شتاب دهنده بزرگ هادرونی LHC2 با استفاده از آشکارساز C7 TeV3در انرژی مرکز جرمCMS و با درخشائی450μb-1 انجام شده است. سطح مقطع تولید جفت پایون در فضای فاز با تکانه عرضی 0.2GeV/cو تندایی24 <|Y| ، اندازه گیری شده است. سطح مقطع اندازه گیری شده برابر است با bμ(lumi) 8/0± (syst) 1/3 ± (stat) 3/0± 5/20 همچنین در این مطالعه، سطح مقطع دیفرانسیلی تابع جرم ناوردای جفت پایون، با مدل های پدیده شناختی مقایسه شده است.
    کلیدواژگان: انحصاري، پايون، سطح مقطع
  • اعظم کاردان * صفحات 609-613
    ما با استفاده از یک کد محاسباتی، بر اساس روش اختلال، ترازهای انرژی هامیلتونی نیلسون را در پارامترهای مختلف تغییر شکل محاسبه کرده ایم. توجه اصلی بر روی تصویر یک حالت پروتونی بر روی 2lپایه های مجانبی بوده است. محاسبات ما نشان می دهد جملات تصحیحی اسپین- مدار و ویژه حالات مختلف مجانبی را جفت کرده و بنابراین هامیلتونی نیلسون در این پایه ها قطری نخواهد بود. با افزایش تغییر شکل، جملات غیر قطری کوچک تر می شوند. بنابراین در تغییر شکل های به اندازه کافی بزرگ 0.4≤ε اعداد کوانتومی مجانبی، اعداد کوانتومی خوبی خواهند بود
    کلیدواژگان: مدل نيلسون، روش اختلال، پارامتر تغيير شکل، ويژه حالتهاي مجانبي، اعداد کوانتومي خوب
  • غلامرضا برون*، صلاح زرین صفحات 615-620
    در این مقاله ما معادله تحولی DGLAP1 را برای تابع ترکش گلئون به مزون یا باریون در مرتبه LO2 و NLO3 با استفاده از روش لاپلاس به دست می آوریم. با استفاده از این روش، معادلات به دست آمده برای مزون های و g→j/Ψ را تحول می دهیم تا درستی این روش را نشان دهیم. در این روش نیازی به محاسبه توابع در فضای لاپلاس نیست. از روش لاپلاس فقط برای ساده سازی معادلات استفاده می شود.
    کلیدواژگان: ترکش، تحول، لاپلاس
  • رضا شکوری *، حسن حیدری صفحات 621-628
    در این مقاله لایه نازک دی اکسید سیلیسیم، SiO2، با دو روش تولید شده است: در روش اول، SiO2 مستقیما توسط تفنگ الکترونی تبخیر می شود و هم زمان برای جبران کمبود اکسیژن، گاز اکسیژن به محیط تزریق می شود. در روش دوم، منواکسید سیلسیم، SiO، توسط تبخیر گرمایی بخار می شود و در حین تبخیر آن، زیر لایه با یون های اکسیژن که توسط یک منبع یون تولید شده اند بمباران می شود. ضریب شکست، ضریب خاموشی و ضخامت لایه به کمک حل عددی روابط عبور و بازتاب محاسبه شده اند. از میزان جابه جایی منحنی عبور مقدار نایکنواختی لایه محاسبه شده است. نتایج نشان می دهد که اگر مقدار جریان و انرژی یون های اکسیژن به طور مناسب انتخاب شوند، لایه SiO2 تولید شده در روش دوم، جذب ندارد. به علاوه لایه SiO2 تولید شده توسط روش دوم به مراتب یکنواخت تر از لایه تولید شده با روش اول می باشد.
    کلیدواژگان: دی اکسید سیلیسیم، منواکسید سیلسیم، یکنواختی، ضریب شکست
  • |
    • Maryam Ashrafi * Pages 73-79

      Modular invarinat, constraints the spectrum of the theory. Using the medum temprature expansion, for first and third order of derivative, a universal upper bound on the lowest primary field has been obtained in recent researches. In this paper, we will improve the upper bound on the scaling dimension of the lowest primary field. We use by the medium temprature expansion for an arbitrary orders of derivative. We show that the upper bound depends on the order of derivative. In this research, we obtain the optimal values of the order of derivatives which leads to the best upper bound.

      Keywords: Conformal Field Theory, Modular Invariant, Primary Fields, Medium Temprature Expansion
    • Hamideh Zaliani *_M. J Tafreshi_Dariush Souri Pages 81-87

      In the present work, KTP crystals have been grown by spontaneous nucleation technique in flux medium using K6P4O13 flux. 0.4-1 °C/h cooling rates were applied in the spontaneous nucleation process. The presence and amount of impurities has been determined by using XRF. The optical transmission spectra of impure KTP crystals in the UV–visible region are discussed. The transmission cut-off is clearly shown at the optical absorption edge, as well as the rapidly reduced absorption with increasing wavelength. It is shown that the presence of impurity shifts the absorption edge of KTP towards lower energy region. The wavelength dependence of absorption coefficient is determined in the UV–visible range, and the characteristics of the optical absorption edge are discussed. Results reveal that the absorption edge and the type of optical charge carrier transition can be attributed to indirect transition for these crystals. It is shown that presence of impurity decreases the indirect band gap (Eg) of KTP crystals, causing the indirect transition absorption edge to move towards lower energy.

      Keywords: Spontaneous nucleation method, KTP crystals, Energy gap, Transmission spectrum, Flux method
    • Mitra Ghergherehchi *, Esfandiar Mehrshahi, Hesam Ahmady Pages 89-92

      A novel and rather simple method is presented to describe the physics of space-charge region in a planar diode. The method deals with the issue in the time domain and as a consequence transient time behavior can be achieved. Potential distributions and currents obtained using this technique, supposing zero initial velocity for electrons, reveal absolute agreement with Child's results. Moreover, applying the method for non-zero uniform initial velocity for electrons, gives results which are in good agreement with previous works

      Keywords: space-charge region, space-charge limited current, planar diode, initial velocity
    • Reda Tantawi *_E. I Nassar Pages 93-101

      The impact parameter formalism of the single-center close-coupling, first-, and second-order Born approximations have been applied to investigate direct excitations of Helium He(2s) and Lithium Li(2s) ions by colliding with protons or antiprotons. The total 3s, 3p, and 3d scaled excitation cross sections are calculated in the scaled impact energy region (2 to 1000 keV). The present work aims to explore the sensitivity of the cross sections to the different electronic transition mechanisms of the considered approaches as well as the charge of each of the projectile and the target nucleus. Also, the calculated cross sections are compared with those obtained by previous theoretical calculations.

      Keywords: Scaled direct excitation cross sections, Single-center close-coupling expansion, Born approximation, He+(2s), Li++(2s) ions, Protons, antiprotons
    • Redouane Lamsoudi, Sallah Eddine Elbahar, Mohammed Ibn Chaihk Pages 103-108

      In this work, we determined the analytical expressions of the form factor of a cubical particle in the WKB approximation. We adapted some variables (size parameter, refractive index, the scattering angle) and found the form factor in the approximation of Rayleigh-Gans-Debye (RGD), Anomalous Diffraction (AD), and determined the efficiency factor of the extinction. Finally, to illustrate our formalism, we analyzed some numerical examples

      Keywords: scattering, form factor, cubical particle, WKB approximation
    • Ayoub Khatooni, Faezeh Rahmani *, Freydoun Abbasi Davani Pages 109-117

      One of the most important requirements for industrial pipelines is the leakage detection. In this paper, detection of leak and determination of its amount using radioactive tracer injection method has been simulated by Monte Carlo MCNP code. The detector array included two NaI (Tl) detectors which were located before and after the considered position, measure emitted gamma from radioactive tracer. After calibration of radiation detectors, the amount of leakage can be calculated based on the count difference of detectors. Also, the effect of material and thickness and diameter of pipe, crystal dimension, types of fluid, activity of tracer and its type (24Na, 82Br, 131I, 99mTc, 113mIn) as well as have been investigated on the detectable amount of leakage. According to the results, for example, leakage more than 0.007% in volume of the inlet fluid for iron pipe with outer diameter 4 inch and thickness of 0.5 cm, Petrol as fluid inside pipe, 3 3 inch detector and 24Na with activity of 100 mCi can be detected by this presented method.

      Keywords: Leakage, Radiotracer, MCNPX 2.7e, NaI(Tl), Pipeline
    • Mohammad Amirhamzeh Tafreshi M.A.*, Dariush Rostamifard D., Ali Nasiri A Pages 507-512
      This paper has been prepared by using experimental and simulated data due to a large and a small Filippov type plasma focus devices. In the first part of the paper, the plasma-focusing phenomenon is introduced and the parameters of the devices are presented. Then the results of empirical studies of the pinch-time dependence to the gas pressure are provided. In the next part, the theoretical basis of the ML-model is reviewed and the results of applying this model to simulate the two devices are presented. Both simulated and experimental results showed that in the larger device, the pinch time is clearly more sensitive to the pressure variations. The study also showed that the model predictions for larger device are more accurate than the predictions for the smaller device.
      Keywords: Plasma focus, Filippov, ML model, gas pressure, pinch time
    • Mohammad Vahid Dastjerdi *, Seyyed Jabbar Mousavi, Mahmood Soltanolkotabi Dr Pages 513-522
      A significant feature of alloys is the surfaces hardness that is always accompanied by challenges when it’s measured by common mechanical techniques. In this investigation, we used Laser Induced Breakdown Spectroscopy (LIBS) as a replacement method for common mechanical techniques to measure the surfaces hardness of different alloys. After recording the spectrum of alloy samples in order to identify the surface hardness of analyzed sample, K-Nearest Neighbors method (KNN) was used and obtained results showed that the LIBS-KNN method can separate and identify the surfaces hardness of samples with precision of 93.3%. In addition, in order to identify the percentage of constituent elements of alloys and their hardness, calibration approach was investigated that showed there is an appropriate linear relation between recorded emission lines from the LIB spectra of sample alloys and the percentage of their constituent elements and also their Vickers hardness numbers. Therefore, According to exclusive advantages of LIBS technique i.e. high speed analysis, non-destructive analysis and being portable, some of available difficulties in conventional mechanical techniques can be removed.
      Keywords: Laser Induced Breakdown Spectroscopy, Penetration Hardness, alloys
    • Mehrdad Hosseini Sayed, Ahmad Kiasatpour Dr Pages 523-530
      in this study, designing and manufacturing of solar imaging and tracking system in order to research and spectroscopy applications are investigated. The device has the ability to be used as a Telescope, spectroscope, spectrophotometer and spectrohelioscope. The results obtained from this device are used in the various field of research such as absorption spectra of the surface of the sun, transit of planets in front of the sun, Doppler effects, evaluation of the Fraunhofer lines, plot of intensity versus wavelength and studying of Solar Flares. In this research, design and manufacture of the device, along with some of the results, are reported.
      Keywords: Doppler effects, Fraunhofer lines, absorption spectra
    • Omid Khani *, Morteza Zargar Shoushtari Dr, Mohammad Jazirehpour Dr, Mansoor Farbod Dr Pages 531-540
      The structural properties and microwave absorption capability of the iron nanoparticles and iron-carbon core-shell nanoparticles have been studied, in the present paper. The investigated nanoparticles were synthesized by hydrothermal route and by reduction of hematite nanoparticles during annealing in argon-hydrogen atmosphere. Hematite-iron phase transformation during the reduction process has been studied by X-ray diffraction (XRD). XRD patterns showed that in iron nanoparticles, hematite-iron phase transformation was completed after 30 min annealing whereas about iron-carbon nanoparticles, the phase transformation completion occurred after 65 min, and before 65 min annealing, wustite (FeO) phase was still present in XRD patterns. M-H loops and relative complex permittivity (ε) and permeability (µ) of the iron nanoparticles and iron-carbon nanocapsules were investigated too. According to the ε and µ spectra in 1-18 GHz, the carbon shell can affect microwave properties of the iron nanoparticles. Carbon shell can reduce microwave permeability and permittivity of the composites containing iron nanoparticles.
      Keywords: Iron-carbon core-shell nanoparticles, Hydrothermal method, Hematite-iron phase transformation, microwave absorber
    • Saeideh Latif *, Hossein Safari Dr, Asadollah Safaei Pages 541-551
      The present paper introduces the Bayesian spectral analysis as a powerful and efficient method for spectral analysis of photometric time series. For this purpose, Bayesian spectral analysis has programmed in Matlab software for XZ Dra photometric time series which is non-uniform with large gaps and the power spectrum of this analysis has compared with the power spectrum which obtained from the Period04 software, which designed for statistical analysis of astronomical time series and used of artificial data for unify the time series. Although in the power spectrum of this software, the main spectral peak which represent the main frequency of XZ Dra variable star oscillations in the f = 2.09864 (day -1) is well known but false spectral peaks are also seen. Also, in this software it’s not clear how to generate the synthetic data. These false peaks have been removed in the power spectrum which obtained from the Bayesian analysis; also this spectral peak which is around the desired frequency has a shorter width and is more accurate. It should be noted that in Bayesian spectral analysis, it’s not require to unify the time series for obtaining a desired power spectrum. Moreover, the researcher also becomes aware of the exact calculation process.
      Keywords: Bayesian Spectral Analysis, Baye's Theorem, Period04 Software, Power Spectrum, Variable Star, Light Curve
    • Ali Moradian *, Mohammmadreza Setare, Asrin Seyedzahedi Pages 553-560
      In this paper, we investigate the Casimir nano system composed of two quadrisected dielectric disks separated by a thin gap. Initially the two disks have the same surface dielectric distributions. We use scatting approach in the weak coupling limit and show that the top plate experiences a torque AWT IMAGE if it rotates about its axes by an angleAWT IMAGE. Consequently, we will be able to calculateAWT IMAGE.
      Quite interesting, such a nanomachine may be used to examine the dielectric dependence of the Casimir torque. Our small system can be used to measure small torques. We assume that the top disk is mounted on an axle and part of the rotational friction in the system comes from the axial friction and an external load is mounted on it. For such a system with specified parameters, we can estimate inertia and axial friction. Therefor we can neglect the inertia term and use the over damped regime to describe the dynamics of our system. We show that our small system can rectify a periodic square-wave angular velocity and we obtain the average angular velocity of the top plate.
      Keywords: Casimir nano system, dielectric, rectification, scatting approach
    • S. Safa Dr, M. Asghari, S. Mokhtari, R. Azimirad Dr * Pages 561-571
      In this study, encapsulated ZnO nanorods with different amount of chromium (Cr) dopant (0-4.5 at.%) were prepared with hydrothermal method, and their sensitivities as gas sensors against ethanol vapor were investigated. Morphologies of samples were explored by field emission scanning electron microscope (FESEM) which showed that encapsulation process increased the diameter of ZnO nanorods. Existence of Cr in ZnO nanorods structures was confirmed by Energy-dispersive X-ray spectroscopy (EDX). Based on X-ray diffraction (XRD) analysis, the ZnO:Cr nanorods had wurtzite crystal structure, and adding Cr did not alter the crystal structure of ZnO. Electrical measurements revealed that current levels of samples were decreased by adding Cr, while the current level of the sample with 4.5 at.% was increased. This reduction could be attributed to the presence of Cr3 ions, which led to decrease of charge carriers. Besides, due to the catalytic properties of Cr and its lower ionization energy than Zn, it was observed that Cr dopant improved the detection sensitivity of samples, and decreased the optimum operating temperature of samples. Among all samples, the most sensitivity (14) was obtained based on the sample with 1.5 at.% of Cr for 500 ppm ethanol vapor at the optimum temperature (250 ). In fact, by encapsulating the samples, they became rougher, so the appropriate places to absorb and decompose of gas molecules are increased.
      Keywords: Semiconductor, Nanostructure, Metal oxide, Core-Shell
    • Meysam Daneshvar *, Ali Rostamnejadi Dr Pages 573-583
      In this research, we have studied the photonic band structure, optical properties and thermal emission spectrum of 2D Silicon photonic crystal with hexagonal structure. The band structure, band gap map and the gap size versus radius have been calculated by plane wave expansion method. The maximum band gap size of TE (TM) polarization and the complete gap size are 51% (20%) and 17% at air hole radius r=0.43a (0.50a) and r=0.48a, respectively. The optical properies have been calculated by FDTD methd in the range of 1 to 10 . The thermal emission spectrum has been obtained from absorption by Kirchhoff’s law. The obtaine results show that by engineering the band structure, the thermal emission spectrum of 2D Silicon photonic crystal can be controlled in a manner that can be used in thermophotovoltaic systems.
      Keywords: Silicon Photonic crystal, band structure, band gap, optical properties, thermal emission
    • Fariba Masoudi, Hamid Mosadeq * Pages 585-594
      Motivated by recent experiments that detects Dzyaloshinskii-Moriya (DM) interaction in , we study the effects of DM interaction on magnetic orders of J1-J2 antiferromagnetic Heisenberg model. First, we find the classical phase diagram of the model using Luttinger-Tisza approximation. In this approximation, the classical phase diagram has two phases. For , the model has canted Neel and DM interaction cants the spins of one on the subluttices. The ground state of model is classically degenerate for , including infinit numbers of vorticity vectors that are able to minimize the model. This phase is important because of the probability of the existence of quantum spin liquid in this region. To investigate the effect of quantum fluctuation on the stability of the classical phase diagram, linear spin wave theory of Holstein-Primakoff is used. The results show that in the classical degeneracy regime, the quantum fluctuations for cause spiral order in this region. The ground state of model remains disorder for, and this region is a good place for finding quantum spin liquid
      Keywords: Dzyaloshinskii-Moriya (DM) interaction, antiferromagnetic Heisenberg model
    • Ahmad Mehrabi *, Habib Khosroshahi, Hadi Rahmani Pages 595-601
      In a microlensing event, at caustic crossing, flux of a spot can be magnified several times with respect of the source star. This magnification contrast provide a unique opportunity to measure the magnetic field over a source star. In this work we investigate possibility of magnetic field detection through the Zeeman effect when a source crosses a caustic line. Using Fourier analysis, one can separate other broadening agents from actual Zeeman broadening. At next stage we use microlensing formalism to measure the magnification contrast of spot and source and finally using two reliable strategy, we find the delectability of magnetic field as a function of maximum magnification for spots with different sizes. The resolution and the signal to noise in each strategy determine which magnetic fields are detectable.
      Keywords: gravitational microlensing, stellar magnetic field, spectroscopy
    • Mohsen Khakzad * Pages 603-607
      The exclusive production of charged pions, are reported in the proton-proton collisions, where the ππ- pair is emitted at the central rapidity, y, and the scattered protons stay intact (p) without detection. This measurement is performed with the CMS detector at the LHC, using a data sample corresponding to an integrated luminosity of 450 μb-1 collected at a center-of-mass energy of 7 TeV. The dipion cross section, measured for single-pion transverse momentum pT > 0.2 GeV/c and rapidity |y|
      Keywords: exclusive, pion, cross-section
    • Azam Kardan Dr * Pages 609-613
      We have studied the Nilsson potential energies at different deformation parameters using a code based on the perturbative treatment. Special attention is given to the projection of a proton state at different deformations on the asymptotic basis functions. Our calculations show that the spin-orbit and the orbital angular momentum terms couple different asymptotic eigenstates, Nilsson Hamiltonian being hence not diagonal in these basis functions. Therefore, at least at deformations AWT IMAGE0.4, the asymptotic quantum numbers are not good quantum numbers.
      Keywords: Nilsson model, perturbative treatment, deformation parameter, asymptotic eigenstates, good quantum numbers
    • G. R Boroun *_S. Zarrin Pages 615-620
      In this work, we calculate DGLAP evolution equation at LO and NLO by Laplace method for fragmentation function of gluon to meson or baryon. To prove the validity of this method, we evolve the fragmentation functions of andby using this method. In this method, it is not necessary to calculate these functions in Laplace space. This method is just used for simplifing the equations
      Keywords: Fragmentation, Evolution, Laplace
    • R. Shakouri Dr*, H. Haydari Pages 621-628
      In this paper, SiO2 thin film is produced by two
      Methods
      at the first method, SiO2 is evaporated by the electron gun and oxygen gas is injected to compensate for oxygen loss due to dissociation. At the second method, silicon monoxide is evaporated by thermal evaporation and during the evaporation time, substrate is bombarded by the ion oxygen that produced by an ion source. The refraction index, the extinction coefficient and the thickness layer are calculated by numerical method of the transmittance and reflectance equations. By the shift in the spectral transmittance, amount of non uniformity is calculated. Results show that if the quantity of the current and the ion energy are selected properly, SiO2 film will not have absorption. Moreover, SiO2 film produced by the second method is more uniform than that of by the first method
      Keywords: Silicon Dioxide, Silicon Monoxide, Uniformity, refractive index