فهرست مطالب

مجله پژوهش فیزیک ایران
سال هجدهم شماره 3 (پاییز 1397)

  • تاریخ انتشار: 1397/09/10
  • تعداد عناوین: 22
|
  • زهرا امیرسرداری* ، محمدرضا عبدی صفحات 369-377
    در این پژوهش پرکاربردترین فولادهای ضد زنگ در صنعت هسته ای از قبیل 304، 304Lو 346L را تهیه و توسط لیزر با ابعاد نیم در نیم میلی متر برش داده شد. تاثیر تابش بر خواص فیزیکی نمونه ها بررسی شد. تابش دهی گاما بر روی نمونه ها با یک رادیو ایزوتوپ کبالت- 60 با دز های 100 و 200 کیلوگری انجام شد. مقاومت نمونه ها به روش چهارپروب اندازه گیری گردید و مقاومت ویژه و رسانندگی الکتریکی از مقاومت محاسبه شد. با استفاده از قانون ویدمان- فرانتس رسانندگی حرارتی نمونه ها به دست آمد. همچنین خواص مغناطیسی نمونه ها با استفاده از دستگاه مغناطش سنج ارتعاشی اندازه گیری شد.
    کلیدواژگان: فولاد ضد زنگ، چهارپروب، ویدمان- فرانتس، مغناطش سنج ارتعاشی
  • حسن نعناکار*، امیدرضا کاکویی صفحات 379-389
    پراکندگی 15N با انرژی MeV 23 Elab= به هدف CH2( Au) مطالعه شد. پراکندگی کشسان15N در بازه زاویه ای °19-°7 با استفاده از آشکارساز نواری سیلیسیوم LEDA اندازه گیری شد. با استفاده از داده های برهم کنش ثبت شده، تصحیح انحراف باریکه ذرات، تعداد یون برخوردی به نمونه و سطح مقطع دیفرانسیلی پراکندگی کشسان 12C(15N, 15N)12C در بازه زاویه ای °19-°7 تعیین شد. همچنین با استفاده از مدل اپتیکی و با استفاده از نرم افزار Fresco سطح مقطع پراکندگی برای بازه زاویه ای ° 0 تا °60در چارچوب آزمایشگاه بامقادیر پارامترهای تعمیم یافته اپتیکی بدست آمد و با داده های تجربی مقایسه شد سطح مقطع نظری حاصل از پتانسیل اپتیکی و داده های تجربی حاصل از این کار پژوهشی تفاوت معناداری را در زاویه های تحت پوشش نشان می دهند.
    کلیدواژگان: پراکندگی کشسان، برخورد هسته- هسته، باریکه N15، هدف 12C، مدل اپتیکی، آشکارساز LEDA
  • هادی دهقان نیری*، رضا اسدی، مهدی خواجه صفحات 391-400
    در این تحقیق طراحی و ساخت یک مدوله کننده الکترواپتیک هتروداین مجتمع در لیتیوم نایوبایت ارائه شده است. در این مدوله کننده از روش تبادل پروتون برای ساخت موجبر استفاده شده و برای اعمال دو سیگنال بسامد بالا به مدوله کننده از الکترودهای لایه نشانی شده که هر یک از شاخه های موجبر ماخ زندر بین آنها قرار گرفته، استفاده شده است. در این روش هر یک از سیگنال های الکتریکی به یکی از شاخه های موجبر ماخ زندر اعمال شده و بنابراین هر یک از آنها می تواند با یک بسامد مشخص تحریک شود. در نهایت این دو سیگنال به صورت اپتیکی با هم جمع شده که باعث ایجاد بسامدهایی معادل جمع بسامد دو سیگنال ورودی و تفریق آنها در خروجی می شود. همین طور با استفاده از روش المان محدود تاثیرات میزان نفوذ پروتون در شکل مد نوری خروجی، و ابعاد و شکل الکترودها در ضریب هم پوشانی میدان الکتریکی و مد موجبر و همین طور امپدانس الکترودها شبیه سازی شده است.
    کلیدواژگان: مدوله کننده نوری، هتروداین، لیتیوم نایوبایت، موجبر، نفوذ پروتون
  • آزیتا جوکار* ، عبدالعلی رمضانی صفحات 401-407
    در این پژوهش، نانوسیم های مغناطیسی نیکل به روش الکتروانباشت پالس ac درون قالب آلومینای آندی ساخته شده به روش آندایز دو مرحله ای رشد داده شدند. لایه سدی کف حفره ها در یک آندایز غیرتعادلی بر اساس یک تابع نمایی تا ولتاژهای 8، 12، 16و 20 ولت نازک سازی شد. نمونه با شرایط الکتروانباشت عبارت اند از، جریان ثابت 15 میلی آمپر، زمان خاموشی 48 میلی ثانیه با دماهای بستر 10 و 20 درجه سانتی گراد و دمای الکترولیت 30 درجه سانتی گراد تهیه گردید. و تاثیر ولتاژ نازک سازی لایه سدی و دمای بستر روی بازده الکتروانباشت مورد بررسی قرارگرفت و از آنالیزهایVSM و SEM استفاده شده است. در این پژوهش متوجه شدیم که در دمای بستر 10 درجه سانتی گراد با افزایش ضخامت لایه سدی، بازده نهشت کاهش می یابد و در دمای 20 درجه نتیجه عکس خواهد بود.
    کلیدواژگان: آرایه نانوسیم های نیکل، بازده الکتروانباشت، دمای لایه سدی، ضخامت لایه سدی
  • عبدالجبار شکری* ، محمدحسین توکلی، امیر عباس صبوری دودران، محمد صادق آخوندی خضرآباد صفحات 409-420
    مدل سازی کامپیوتری جهت طراحی القاگرها برای کاربردهای متفاوت در فرایند گرمای القایی اغلب برای صرفه جویی در هزینه های ناشی از خطا و آزمون ضرورری به نظر می رسد. در این مقاله تاثیر تعداد حلقه های پیچه در فرایند گرمای القایی با حل عددی معادلات ماکسول با استفاده از روش المان محدود و به کمک بسته نرم افزاری کامسول مولتی فیزیک، در سه بعد بررسی شده است. بررسی تاثیر تعداد حلقه های پیچه در مقدار و الگوی گرمای تولید شده در قطعه کار برای کاربردهای ویژه در صنعت و تکنولوژی خیلی مهم و حیاتی است. زیرا تعداد حلقه های پیچه یکی از عوامل های مهم در طراحی دستگاه های گرمای القایی است. در ابتدا یک پیچه تک حلقه ای در مدل سه بعدی شبیه سازی شده و سپس پیچه هایی چند حلقه ای با تعداد حلقه های 2، 3 و 4 لحاظ شده اند. از ولتاژ 200 ولت متناوب با بسامد یک کیلوهرتز به عنوان منبع تولید میدان های الکترومغناطیسی بهره گرفته شده است. نتایج حاصل از محاسبات عددی نشان می دهد تعداد حلقه های پیچه تاثیر قابل ملاحظ های بر کمیت هایی مانند توزیع و شدت چگالی شار مغناطیسی، چگالی جریان های گردابی در قطعه کار و همچنین گرمای حجمی تولید شده در پیچه و قطعه کار دارد.
    کلیدواژگان: فرایند گرمای القایی، روش المان محدود، شبیه سازی
  • بهناز هادی سیچانی، حمیده شاکری پور*، هادی سلامتی صفحات 421-425
    نمونه های ابررسانای دما- بالای Y1-xNixBa2Cu3O7-δ با اضافه کردن ناخالصی Ni در جایگاه Yبا مقادیر x=0, 0.002, 0.006, 0.01 به روش استاندارد واکنش حالت جامد ساخته شدند. آنالیز پراش پرتوی ایکس نمونه ها نشان می دهد که نمونه ها تک فاز بوده و فاز 123 تشکیل شده است. پذیرفتاری مغناطیسی ACنمونه ها تحت دو میدان مغناطیسی متفاوت A/m 8/0 و A/m 400 400 اندازه گیری شد. نتایج نشان می دهد که با افزایش آلایش نیکل تا حد بهینه، اتصال بین دانه ها افزایش یافته و میخکوبی شار بهتر می شود.
    کلیدواژگان: ابررسانای دمابالا، پذیرفتاری مغناطیسی، میخکوبی شار
  • حامد نجفی آشتیانی* صفحات 427-435
    در این تحقیق لایه های نازک اکسید مولیبدن به روش کندوپاش مغناطیسی پالس قدرت بالا در پالس های مختلف با طول 60، 90، 120، 150 و 180 میکروثانیه بر روی زیرلایه های شیشه ای در ترکیبی از گازهای واکنشی و غیرواکنشی با نسبت 66/0=O2/Ar لایه نشانی شده اند و مورد مطالعه ساختاری و اپتیکی قرار گرفته اند. ترکیب شیمیایی این اکسیدهای فلزی با آنالیز طیف سنجی فوتوالکترون پرتوی ایکس (XPS) تعیین و به صوررت MoOx با x های مختلف مشخص شدند. با بررسی خواص اپتیکی مشخص گردید که نقصان اکسیژن در پالس های طولانی تر موجب کاهش متوسط عبور اپتیکی و همچنین کاهش گاف نوار اپتیکی لایه ها می شود.
    کلیدواژگان: کندوپاش مغناطیسی، لایه نازک، اکسید مولیبدن، خواص اپتیکی
  • پروانه نظرزاده* ، راضیه باقری صفحات 437-443
    در این مقاله، با استفاده از تقریب WKB وپتانسیل تقریبی Prox77 ، نیمه عمر واپاشی خوشه ایبا در نظر گرفتن تغییر شکل هر دو هسته ی خوشه و دختر و برای سمت گیری نسبی 45،35،15،0 و60 درجه، محاسبه و با نتایج آزمایشی مقایسه گردیده است. محاسبات نشان می دهند که این پتانسیل تقریبی نتایج خوبی را در مقایسه با نتایج آزمایشی و نتایج حاصل از مدل قطره مایع، LDM ، ارائه میدهد. همچنین دیده می شود که با افزایش زاویه ی سمت گیری تمایل سامانه به واپاشی خوشه ایکم شده و به سمت پایداری میل می کند.
    کلیدواژگان: نیمه عمر، واپاشی خوشه ای، پتانسیل تقریبی(مجاورت)
  • داریوش نادری* ، علی فرمانی صفحات 445-450
    با استفاده از دینامیک لانژوین و ماهیت اتلافی پدیده شکافت، تغییرات دینامیکی هسته از تشکیل هسته مرکب تا مرحله جدا شدن دو پاره شکافت را مورد مطالعه قرار داده ایم. در طی این فرایند اتلافی ذراتی همانند نوترون، پروتون، ذره آلفا و اشعه گاما از دستگاه مرکب خارج می شوند. تعداد ذرات خارج شده را می توان به صورت آماری و یا دینامیکی مورد بررسی قرار داد. در کار حاضر با استفاده از معادله لانژوین تعداد ذرات خارج شده را به صورت دینامیکی محاسبه کرده ایم. نتایج به دست آمده برای ذرات آلفا، پروتون ها و نوترون ها را با داده های تجربی مقایسه کرده ایم. همچنین اثر ضریب اتلافی بر این کمیت ها را مورد بررسی قرار داده ایم. این نتایج نشان می دهند که ضریب اتلافی بر نتایج به دست آمده موثر بوده و با استفاده از روش دینامیکی می توان توافق خوبی بین نتایج تجربی و نظری ایجاد کرد
    کلیدواژگان: دینامیک لانژوین، شبیه سازی مونت کارلو، هسته مرکب، ضریب وشکسانی
  • هاجر ابراهیم، محمد علی اکبری* صفحات 451-457
    در این مقاله با استفاده از ایده دوگانی پیمانه ای- گرانشی به مطالعه به تعادل رسیدن مقدار چشم داشتی دو عملگر با وزن های همدیس 2 و 3 در یک محیط در حضور تصحیحات ثابت جفت شدگی و دمای مشخص می پردازیم. مشاهده می شود که با بزرگ تر شدن ضریب تصحیحات ثابت جفت شدگی زمانی که این عملگر ها نیاز دارند تا به تعادل برسد برای هر دو مقدار وزن همدیس بزرگ تر می شود و این رفتار مستقل از روشی است که دستگاه خارج از تعادل شده است. علاوه بر این مشاهده می شود که برای تزریق انرژی های به اندازه کافی سریع، زمان مقیاس شده به تعادل رسیدن این عملگر ها از مقدار دمای محیط مستقل است
    کلیدواژگان: دوگانی پیمانه ای- گرانشی، زمان تعادل، کرومودینامیک کوانتمی، پلاسمای کوارک- گلوئون، ثابت جفت شدگی
  • پیمان گمار* ، علی حسن بیگی، حسن مهدیان صفحات 459-465
    تابش تراهرتز همدوس به واسطه حرکت باریکه الکترون نسبیتی خوشه بندی شده، از درون ویگلر پیچشی در حضور میدان مغناطیسی محوری، مورد مطالعه قرار گرفت. باریکه الکترونی نسبیتی پیش از رسیدن به ویگلر، مورد تابش همزمان دو لیزر با اختلاف بسامد از مرتبه تراهرتز قرار می گیرد، برهم کنش باریکه الکترونی با موج زنش حاصل دو تابش لیزر، باریکه الکترونی را خوشه بندی می نماید، که می تواند با گذشتن از درون ویگلر پیچشی در حضور میدان مغناطیسی محوری، تابش تراهرتز همدوس گسیل نماید. مطالعات عددی انجام شده نشان داد که میدان مغناطیسی محوری سبب تقویت میزان تابش ها می شود
    کلیدواژگان: لیزرالکترون آزاد، ویگلر پیچشی، میدان مغناطیسی محوری، باریکه الکترونی خوشه بندی شده
  • امیر رضایی درشگی، فرشید محمدرفیعی* صفحات 467-475
    درون سلول زنده، بسیاری از فرایندهای بنیادی، شامل تغییراتی در مولکول های باردار مارپیچی و برهم کنش های بین آنها است. رشته های اکتین و DNA مهم ترین نمونه ها از مولکول های باردار مارپیچی هستند. در این مقاله یک مولکول باردار دو رشته ای واقع در محلول در نظر گرفته می شود. مطابق موارد موجود در طبیعت، ثابت دی الکتریک چنین مولکول هایی تفاوت قابل توجهی با ثابت دی الکتریک محیط پیرامون این مولکول ها دارد. به منظور محاسبه پتانسیل الکتروستاتیک مساله در رژیم دیبای- هوکل، تابع گرین دیبای- هوکل را به دست می آوریم و با استفاده از این تابع گرین، پتانسیل الکتروستاتیک دستگاه را محاسبه می کنیم. علاوه بر این، وابستگی پتانسیل الکتروستاتیک به ناهمگنی دی الکتریکی، پارامترهای ساختاری و غلظت نمک را بررسی می کنیم. این مطالعه می تواند بیش از پیش نقش برهم کنش های الکتروستاتیک را در بسیاری از فرایندهای بنیادی شامل مولکول های باردار مارپیچی مانند DNA و رشته های اکتین، روشن سازد.
    کلیدواژگان: مولکول زیستی، دی ان ای، تابع گرین، تقریب دیبای- هوکل، برهمکنش الکتروستاتیک، ناهمگنی ضریب دی الکتریک
  • مصطفی ترکاشوند، امیر حسین فرهبد* ، سیدعلی هاشمی زاده صفحات 477-484
    در این مقاله نخستین مشاهدات تجربی حاصل از کاربرد سوییچ Q انفعالیCr: YAG با محیط فعالCe: Nd: YAG و دمش نوری آرایه های دیود نور گسیل مورد بررسی قرار گرفته است. قطر و طول محیط فعال به ترتیب 3 و 60 میلیمتر است که با استفاده از 4 ردیف 32 تایی دیود نور گسیل آبی در460 نانومتر دمیده می شود. تشدیدگر نوری با طول هندسی cm 14 از دو آینه 99 و 93 درصد تشکیل شده است که در حالت نوسان آزاد بیشینه انرژی خروجی نوسانگر بیش از 200 میکرو ژول است. با قرار دادن یک سوییچ نوری انفعالی با تراگسیل اولیه 96 درصد، یک تپ نوری سوییچ Qبا انرژی 17 میکروژول و پهنای زمانی 240 نانوثانیه به ازای 0. 6ژول انرژی الکتریکی دمش مشاهده شد. با افزایش انرژی دمش تا 1. 2 ژول 2 تپ سوییچ Q کم و بیش هم انرژی پدید می آیند. همچنین روشی مبتنی بر کنترل نرخ دمش و شکل دهی جریان دیودهای نور گسیل برای کاهش پهنای تپ و افزایش انرژی با حفظ تک تپ لیزر ارائه شده است
    کلیدواژگان: سوییچ Q انفعالی، دمش با دیود نور گسیل، لیزر Ce:Nd:YAG
  • بهنام رجبی، احمد مهرآمیز* صفحات 485-489
    در این کار، شکلی جدید و تعمیم یافته برای فرمول آپلتون- هارتری به دست آورده می شود. با استفاده از این فرمول، آثار ناشی از نیروی کوانتومی بر امواج الکترومغناطیسی در حالت های انتشار مایل، شبه موازی و شبه عمود در یک پلاسمای ناهمسانگرد بررسی می شود. در حالت کلی تری نسبت به پژوهش های پیشین، نشان داده می شود نیروی کوانتومی، پاشندگی امواج ویسلر، هلیکون، چپ گرد، عادی و غیرعادی را تحت تاثیر قرار می دهد. بررسی نتایج در حالت های خاص نتایج پژوهش های پیشین را تایید می کند و در حالت های حدی به روابط شناخته شده فیزیک پلاسمای کلاسیک می انجامد.
    کلیدواژگان: پلاسمای کوانتومی، نیروی کوانتومی، امواج الکترومغناطیسی
  • مقالات انگلیسی
  • مهرداد دادستانی* ، هاجر نجاتی پور صفحات 41-51
    با استفاده از محاسبات ابتدا به ساکن بر پایه روش موج تخت به ساخته خطی با پتانسیل کامل (FPLAPW) طیف اتلاف انرژی نزدیک لبه (ELNES) برای لبهk اتم های کربن در بلور مولکولی فنانترین و ایزومر آن، آنتراسین، محاسبه شد. در این دو ساختار، اتم های کربن غیرمعادل طیف های اتلاف متفاوتی نزدیک لبه نمایش می دهند، که این نتیجه ای از طول پیوند متفاوت کربن- کربن به عنوان رفتار مشخصه ای برای بلورهای مولکولی است. طول های پیوند کوتاه تر ساختارهای طیفی در ELNES را به انرژی های بالاتر هل می دهند. در آنتراسین، مکان انرژی آستانه لبه به دلیل گاف نواری کمتر در انرژی های پایین تر ظاهر می شود. در آستانه لبه K کربن در آنتراسین، یک شکافتگی قوی برای بیشینه ساختاری π* به دو بیشینه ساختاری قابل مشاهده است. در مقایسه با لبه K کربن در آنتراسین، به دلیل طول پیوند بزرگ تر کربن- کربن در فنانترین، مکان بیشینه ساختار اصلی σ یک جابه جایی قرمز نشان می دهد. طیف اتلاف فنانترین بلوری شامل انتقال الکترون از اوربیتال s1 کربن به حالت های π* و σ* است. در آنتراسین، دو ساختار اول که دارای بیشترین شدت می باشند، سهم هایی از اوربیتال های π* را شامل می شوند. احتساب تقریب حفره مغزه با استفاده از ابریاخته ها و نیز تنظیم نیم زاویه جمع کننده در مقدار جادویی آن برای حصول طیف های ELNES منطقی و قابل قبول ضروری است.
    کلیدواژگان: بلورهای مولکولی ارگانیک، فنانترین، آنتراسین، النس، نظریه تابعی چگالی
  • رضا ثابت داریانی، راضیه بخشنده سراجی*، حنیفه حقی صفحات 53-58
    شناخت عواملی که باعث می شوند ویژگی های صفحات گرافنی دستخوش تغییر شوند، بسیار مهم است. عواملی زیادی برخواص صفحات گرافنی تاثیر می گذارد که این تاثیرات می توانند تحولی شگرف در کاربرد صفحات گرافنی ایجاد کنند. یکی از عواملی که توجه زیادی را به سمت خود جلب کرده است، امواج آلتراسونیک می باشد. این امواج اثرات قابل توجهی بر خواص الکتریکی و خواص نوری گرافن دارد. در این کار پژوهشی تاثیرات امواج آلتراسونیک با توان های مختلف (35 وات، 50 وات، 360 وات و 420 وات) را بر روی چهار نمونه به مدت زمان 10 دقیقه مورد بررسی قرار داده ایم. در این کار برای ساخت هر چهار نمونه از روش لایه برداری الکتروشیمیایی استفاده شده است. هر چهار نمونه ساخته شده از لحاظ طیف FTIR و تصویرSEM مورد بررسی قرار گرفته است. همچنین به منظور بررسی اثرات امواج آلتراسونیک بر خواص رسانندگی صفحات گرافنی ساخته شده رفتار نمودارهای I-V هر چهار نمونه را مورد آنالیز قرار داده ایم.
    کلیدواژگان: گرافن، الکتروشیمیایی، امواج آلتراسونیک، طیف FTIR، تصویر میکروسکوپ الکترونی روبشی
  • سرجیت بتاچاریا* ، ام دی موینول اسلام، سگاتا باسو، دبدیتی هالدر، آلوکومور د صفحات 59-69
    تشخیص دقیق سیگنال های ضعیف دوره ای در میان سر و صدا و امکان پیام رسانی مطمئن باعث شده است نوسانگر دافینگ (DO) در زمینه ارتباطات بسیار مهم باشد. در نتیجه، بررسی ویژگی های DO بسیار مهم است. یک رویکرد ظریف برای انجام این کار، ساخت مدار الکتریکی است که شبیه سازی معادله غیرخطی DO را انجام می دهد و به بررسی اثر دامنه سیگنال ورودی (Vin) و بسامد (f) می پردازد در حالی که این دو را از یکدیگر جدا می کند. به تازگی، دینامیک هرج و مرج مبتنی بر Vin با استفاده از یک مدار نوسانگر ساده دافینگ هولمز (HD) مورد مطالعه قرار گرفته است. با این حال، ویژگی های مبتنی بر بسامد نوسانگر در ثابت Vin ناشناخته است. این کار براساس شبیه سازی MATLAB از دینامیک هرج و مرج مبتنی بر بسامد از معادله DH است. خروجی مشابه، که با هرج و مرج و غیر هرج و مرج ترکیب شده، با ساخت مدار، هم در آزمایشگاه و هم با شبیه سازی PSPICE به دست می آید. مدار به سمت هرج و مرج کامل در 270 f = هرتز حرکت می کند، در حالی که bifurcation دوره 2، در 680f = هرتز برای ثابت Vin 0. 9V به وجود می آید. کنترل هرج و مرج از طریق دو روش ساده به دست می آید. در روش اول، تغییر پارامتر مدار (ظرفیت) باعث کنترل هرج و مرج می شود. در دومین روش، هماهنگ سازی به وسیله اتصال دو نوسانگر مشابه به دست می آید. این دو روش، اگر چه ظاهرا ساده هستند، می توانند برای استفاده از DH در ارتباطات امن بسیار مفید باشند.
    کلیدواژگان: دینامیک غیرخطی، هرج و مرج، نوسانگر دافینگ هولمز، مدار الکترونیکی، MATLAB، PSPICE، کنترل هرج و مرج
  • محمد امیرعباسی* ، اسماعیل عبدالحسینی سارسری صفحات 71-77
    در این مقاله، به بررسی نظری خواص ترابری الکتریکی داده های تجربی گزارش شده (مرجع [20]) ، مربوط به نیم رسانای کپه ای ZnO و ساختارهای ناهمگون با چاه پتانسیل تکی و دوگانه ZnMgO/ZnO/ZnMgO و ZnMgO/ZnO پرداخته شده و مهم ترین پارامترهای پراکندگی کنترل کننده تراکم و تحرک الکترونی به دست آمده اند. بدین منظور از سازوکارهای پراکندگی ذاتی نظیر فنون های اپتیکی- قطبی، فنون های پیزوالکتریک و پتانسیل تغییر شکل آکوستیکی و پراکندگی غیرذاتی نظیر ناخالصی های یونیزه، در رفتگی ها و میدان های کرنشی- القایی استفاده شده است. به منظور از بین بردن اثرات لایه تبهگن در سطح مشترک ZnO/sapphire داده های تجربی مربوط به نیم رسانای کپه ای ZnO با استفاده از مدل دولایه ای اثر هال تصحیح شده اند. همچنین، تراکم بخشنده ها و پذیرنده ها و انرژی فعالسازی مربوط به آنها با استفاده از معادله خنثایی بار به دست آمده اند. نتایج به دست آمده حاکی از آن است که برای دماهای کوچکتر از 50 کلوین، رسانش جهشی سازوکار رسانندگی غالب می باشد و پراکندگی ناشی از دررفتگی ها کنترل کننده رفتار دمایی تحرک الکترونی در سرتاسر گستره دمایی می باشد. در مورد ساختار های ناهمگون، نتایج به دست آمده نشان می دهد که افزایش تحرک الکترونی در نمونه با چاه پتانسیل دوگانه نسبت به نمونه با چاه پتانسیل تکی به کاهش تراکم در رفتگی ها، تراکم ناخالصی ها در چاه پتانسیل، بار سطح مشترک و میدان های کرنشی- القایی نسبت داده می شود که در نتیجه محصور سازی الکترونی قویتر در کانال رسانشی به دست آمده است.
    کلیدواژگان: اکسید روی، ساختارهای ناهمگون، تحرک الکترونی، پراکندگی
  • سید ابوالفضل قاسمی* ، ابوالفضل مازندرانی، شیوا شه شناس صفحات 79-86
    در این مقاله، مشخصه های مهم مانند میانگین دما، چگالی عددی و بسامد نوسانات الکترون های پلاسما با استفاده از دستگاه تشخیصی پروب لانگمیر دوگانه اندازگیری شده است. در آزمایشات، پلاسمای مورد مطالعه از طریق تخلیه تابان الکتریکی در گازهای معمول مختلف تشکیل شده است. نتایج تجربی نشان می دهند که گاز آرگون بیشترین چگالی الکترونی و بسامد نوسانات را دارا می باشد و بیشترین میانگین دمایی الکترون ها مربوط به پلاسمای هیدروژنی است. نتایج تجربی با استفاده از کد شبیه سازی کامسول راستی آزمایی شده و سازگاری منطقی را نشان می دهند. نتایج این تحقیق می تواند برای مقایسه درجه یونش با پارامترهای اندازه گیری شده پلاسما مفید باشد.
    کلیدواژگان: پروب لانگمیر دوگانه، تخلیه تابان، شبیه ساز کامسول
  • مجتبی مکاری* ، یدالله شهامت، محمدحسن علامت ساز، علی اکبر بابایی بروجنی، حسین معینی صفحات 87-90
    در این مقاله ما با استفاده از روش تفاضل محدود در زمان (FDTD) و شرایط مرزی PML باندهای ممنوعه فوتونیکی را برای شبکه های مربعی و مثلثی که شامل حفره های هوا در ماده دی الکتریک هستند، در دو مد TE وTM بررسی و مقایسه کرده ایم. همچنین اثر غیرخطی بودن زمینه بلور فوتونی در باندهای ممنوعه فوتونیکی بررسی شده و با نتایج حالت خطی مقایسه شده است. مقایسه طیف عبوری حالت خطی و غیرخطی بلور، نشان دهنده انتقال به سرخ در کمینه انتقال برای هر دو شبکه مثلثی و مربعی است.
    کلیدواژگان: بلورهای فوتونی، مواد غیرخطی، نوارها ممنوعه، مدهای TE و TM
  • مهرداد وحدتی* ، سید علیرضا رسولی صفحات 91-105
    فرایند پرداخت کاری سایشی مغناطیسی را می توان جزء دسته فرایندهای غیرسنتی سطح برداری طبقه بندی کرد. از این روش در پرداخت کاری قطعات با شکل ها و جنس های مختلف مانند صفحات تخت، شفت ها، یاتاقان ها، لوله ها و هر قطعه مکانیکی که نیاز به کیفیت سطح مطلوب دارد به کار می رود. پرداخت کاری سایشی مغناطیسی علاوه بر پرداخت کاری در تمیزکاری، پلیسه گیری و براق کاری سطوح فلزی و غیرفلزی به کار می رود. از مهم ترین پارامترهایی که بر نتیجه این روش بسیار تاثیرگذار است، نیروی مغناطیسی می باشد. نیروی مفناطیسی از آهن ربا ثابت و یا دائمی حاصل می شود. در این مطالعه، توسط نرم افزار المان محدود ماکسول، رفتار شدت میدان مغناطیسی، چگالی شار مغناطیسی و نیروهای مغناطیسی در شرایط مختلف بررسی شده است. این شرایط شامل تنوع در نوع شکل هندسی، اندازه و جنس پایه آهن ربا و قطعه کار است. تاثیر خصوصیات مغناطیسی جنس قطعه کار نیز تحلیل شده است. جهت تایید نتایج شبیه سازی، در شرایط مشابه نیز اندازه گیری توسط دستگاه گاوس متر انجام شده است. شدت میدان مورد نیاز جهت میکرو برداری در شرایط مختلف آهن ربا و جنس های مختلف قطعه کار نیز به دست می آید. نتایج نشان می دهد که با افزایش فاصله از سطح منبع میدان مغناطیسی چگالی شار مغناطیسی و همچنین تاثیرات پدیده لبه کاهش پیدا می کند. همچنین مشخص است که جنس قطعه کار، پایه قطعه کار و برهم کنش آنها بر میزان تغییرات چگالی شار مغناطیسی موثر هستند. جهت تمرکز بیشتر چگالی شار مغناطیسی در قطعات پارا یا دیا مغناطیس می توان از پایه فرومغناطیسی استفاده کرد
    کلیدواژگان: پرداختکاری سایشی مغناطیسی، آزمایشات، شبیه سازی، چگالی شار مغناطیسی، تسلامتر
  • وی یو ام رایو* ، ام ویجایا سانتی، کی وی اس سیریشا، ان ساندیا رانی صفحات 107-116
    یادداشت پژوهشییادداشت پژوهشیمتریک های ناهمسانگرد بیانچی نوع II، VIII و IX که از نظر فضایی یکسان و همگن است، و همچنین مدل های کی هان شناسی همسانگرد را می توان در نظریه گرانشی تانسور اسکالر پیشنهاد شده توسط سائز و بالستر (1986) به دست آورد. زمانی که منبع تانسور حرکتی انرژی، یک مایع چسبنده حجمی حاوی رشته های کی هانی یک بعدی است. تمام مدل های به دست آمده و ارائه شده در اینجا در حال گسترش، غیرچرخشی و سرعت بخش هستند. همچنین برخی از ویژگی های مهم مدل های به دست آمده مورد بحث قرار گرفته است.
    کلیدواژگان: ویسکوزیته حجمی، رشته های کیهانی، تئوری سائز- بالستر، متریک های بیانچی نوع II- VIII - IX
|
  • Z Amirsardari*_M R Abdi Pages 369-377
    In the present study, the most useful stainless steels of in nuclear industry, i.e. 304, 304L and 316L were provided and laser cut into 0.5*0.5 cm dimension. The effect of radiation on physical properties of samples were investigated. Gamma irradiation on samples was done with a 60Co radioisotope to the doses of 100 and 200 kGy. The resistance of the samples was measured through the Four-Probe technique, and also the special resistance and the electrical conductivity of the samples were measured from resistance. The conductivity of the samples was obtained through Widman-Frantz. The magnetic properties of the samples were also measured by the Vibrating Sample Magnetometer.
    Keywords: stainless steels, Four-Probe, Widman-Frantz, Vibrating Sample Magnetometer
  • H Nanakar *, O Kakuee Pages 379-389
    Scattering of 15N ions with the energy of Elab = 23 MeV on the CH2(Au) target is investigated. Elastic scattering of these ions in the angular range of 7°-19° was measured by employing the silicon strip detector, “LEDA”. Using the measured scattering data, deviation of ion beam, number of incident ions on the target and differential cross sections of the 12C(15N, 15N)12C elastic scattering in the angular range of 7°-19° were determined. Moreover, by applying the optical model and using the Fresco software, the scattering cross sections in the angular range of 0°-60° in the laboratory framework were obtained by entering the extrapolated optical parameters. The obtained cross section data were then compared with the experimental ones. The theoretical cross section data resulting from the optical potential exhibit meaningful difference with the experimental data obtained in this research work in the covered angular range.
    Keywords: Elastic scattering, nucleus-nucleus collision, 15N ion beam, 12C target, Optical Model, LEDA Detector
  • H Dehghan nayeri *, R Asadi, M Khaje Pages 391-400
    In this research, design and fabrication of an integrated heterodyne electrooptic modulator in lithium niobate have been presented. In this modulator, the waveguide is made by using proton exchange process; to exert two high frequency signals, deposited electrodes with Mach-Zender arms between them are used. In this method, every electrical signal is applied on one of the Mach-Zender arms, so that it can be stimulated by one specific frequency; these two signals are united optically to create frequencies equal to sum and subtraction of the input signal frequencies in the output. Also, by using finite element method, the influence of proton diffusion scale in the output light mode, electrode dimension, and configuration in the overlap integral of the light mode and electrical field, as well as electrode impedance, is estimated.
    Keywords: optical modulator, heterodyne, lithium niobate, waveguide, proton diffusion
  • A Jokar*, A Ramazani Pages 401-407
    In this work, magnetic Ni nanowire arrays were ac-pulse electrodeposited into the anodic aluminum oxide (AAO) template fabricated by the common two-step anodization technique. The barrier layers at the bottom of the pores were exponentially thinned in a non-equilibrium anodization process to 8, 12, 16 and 20 V. These were fabricated using the constant of 15 mA deposition current, 48 mS off-time between pulses, 10, 20 substrate temperatures, and 30°C electrolyte temperature. The effects of thinning voltage and substrate temperature on the electrodeposition efficiency and the magnetic quality of the Ni nanowires were investigated by a Vibrating sample magnetometer (VSM) and a scanning electron microscope (SEM). In this paper, we realized that the bed temperature of 10°C, by increasing the thickness of the barrier layer, reduced deposition efficiency and the temperature was 20 degrees backfired.
    Keywords: nickel nanowire arrays, electrodeposition efficiency, barrier layer temperature, barrier layer thickness
  • A J Shokri*_M H Tavakoli _A Sabouri Dodara _M S Akhondi Khezrabad Pages 409-420
    Computer modeling for the design of inductors for different applications in the induction heating process often seems to be necessary to save costs caused by the trial and error. In this paper, the effects of the number of loops in the induction heating process with the numerical solution of the Maxwell equations have been investigated using finite element method (FEM) and the COMSOL MULTIPHYSICS software package in three dimensions. Therefore, considering the effect of the number of coil turns on the amount and pattern of heat produced in the workpiece for special applications in the industry and technology is critical. This is because the number of coil turns is one of the important parameters in the design of induction heating systems. At first, a single turn coil is simulated in a three-dimensional model; then multi-turn coils with the turns number 2, 3, and 4 have been considered. The voltage of 200 V with the frequency of 1 KHz has been used, as applied to the coil, to serve as the source of electromagnetic fields. The results of numerical calculations show that the number of coil turns can have a significant effect on quantities such as distribution and intensity of magnetic flux density, eddy currents density in the workpiece, and the volume of heat produced in the coil and workpiece.
    Keywords: induction heating process, finite element method, simulation
  • B Hadisichani, H Shakeripour *, H Salamati Pages 421-425
    The high-Tc Y1-xNixBa2Cu3O7-δ samples doped by Ni for Y atom, with x=0, 0.002, 0.004, 0.006 and 0.01 were synthesized by the standard solid-state reaction method. The XRD diffraction of samples showed no impurity phase in all samples. Magnetic susceptibility of the samples under two different magnetic fields of 0.8 and 400 A/m was measured. The results showed that by increasing nickel element to an optimum value, the intragranular connection and flux pinning were improved.
    Keywords: high-Tc superconductor, magnetic susceptibility, flux pinning
  • H Najafi, Ashtiani * Pages 427-435
    In this study, molybdenum oxide thin films are deposited by using high power impulse magnetic sputtering (HiPIMS) at different pulses length of 60, 90, 120, 150 and 180 μs on glass substrates in a combination of reactive and non-reactive gases with a ratio of O2/Ar = 0.66. The structural and optical properties of these coatings are studied. The chemical composition of these metal oxides is determined by analyzing X-ray photoelectron spectroscopy (XPS), and are determined by MoOx stoichiometry with different x-values. By studying the optical properties, it is found that the oxygen deficiency with increasing pulse width cause to reduce the average of optical transmittance and also decrease the optical band gap of coatings.
    Keywords: Magnetron sputtering, thin film, molybdenum oxide, optical properties
  • P Nazarzadeh*, R Bagheri Pages 437-443
    In this paper, the cluster emission half-lives have been calculated by using the WKB approximation and the proximity potential Prox77 as the nuclear potential part and considering the deformations and different relative orientations of the cluster and daughter nuclei. The calculated results are in good agreement with the experimental data and the results of the Liquid Drop Model, LDM. It is seen that with increasing the angle of the relative orientation, the systems under consideration, will be more stable against this phenomenon.
    Keywords: Half-Life, Cluster Emission, Proximity Potential
  • D Naderi*, A Farmani Pages 445-450
    Using Langevin dynamics and the dissipative nature of the fission process, we have studied dynamical variations of nucleus from the formation of the compound nucleus to separation stage of two fission fragments. During this dissipative process, particles such as neutron, proton, alpha particle and gamma ray emit from the compound system. In the present work, the number of emitted particles using Langevin equation are calculated, dynamically. Obtained results for emitted alpha particles, protons and neutrons are compared with the experimental data. Also, we have studied the influence of the dissipative coefficient on these quantities. These results show that the dissipative coefficient affects the results, as well as the good agreement between the experimental data and theoretical results can be reproduced by using the dynamical approach.
    Keywords: Langevin Dynamics, Monte Carllo simulation, Compound Nucleus, Viscosity Coefficient
  • H Ebrahim , M Ali, Akbari * Pages 451-457
    We use gauge-gravity duality to study the effect of corrections to the coupling constant on equilibration time in field theory for scalar operators with Delta=2,3. We will show that for larger correction in coupling constant the equilibration time enhances and this behavior is independent of the method we use to make the system out of equilibrium. Interestingly we observe that for fast energy injection the rescaled equilibration time is independent of temperature of field theory.
    Keywords: Gauge-gravity duality, Equilibration time, QCD, QGP, Coupling constant
  • P Gomar*, A Hasanbeigi , H Mehdian Pages 459-465
    The generation of coherent Terahertz (THz) radiation is studied which is produced from moving the relativistic electron beam through a helical wiggler with axial magnetic field. The relativistic electron beam is modulated via interacts with the beat wave of two laser beams that have frequency difference in THz range. When the modulated relativistic beam of electrons go through the helical wiggler with axial magnetic field, it radiates coherent THz electromagnetic wave as an antenna. In addition, the numerical study has shown the maximum THz power increases with the increasing axial magnetic field power.
    Keywords: free electron laser, helical wiggler, axial magnetic field, laser-bunched electron beam
  • A Rezaie Dereshgi , F Mohammad, Rafiee * Pages 467-475
    Inside living cells, many essential processes involve deformations of charged helical molecules and interactions between them. Actin filaments and DNA molecules are important examples of charged helical molecules. In this paper, we consider an impermeable double stranded charged molecule in the solvent. According to nature, the dielectric constant of the molecule is considerably different from the dielectric constant of the bulk. In order to calculate the electrostatic potential in the problem in the Debye-Huckel regime, we find the proper Debye-Huckel Green function for the problem. Using this Green function, we calculate the electrostatic potential in the system. Furthermore, we study the dependence of the electrostatic potential to the dielectric inhomogeneity, structural parameters and the salt concentration. This study could shed some light on the role of electrostatic interactions in many essential processes involving charged helical molecules such as actin filaments and DNA molecules.
    Keywords: electrostatic potential, Debye-Huckel regime, DNA, actin filaments, dielectric inhomogeneity
  • M Tarkashvand _A H Farahbod*_S A Hashemizadeh Pages 477-484
    The experimental study of passively Q-switched, LED-pumped Ce:Nd:YAG laser is reported. The active medium is a 3 mm diameter laser rod with 60 mm length; it is optically pumped with four segments of blue LEDs at 460 nm, with each segment consisting of 32 single LEDs. The 14 cm length optical resonator with 2 dielectric mirrors and the reflectivity of 99 and 93 percent at 1064 nm produced more than 200 micro-joules laser spikes at the free-running mode of operation. By using a passive optical switch with 96% initial transmission and 0.6 J electrical pumping energy, the single Q-switch (QS) laser pulse with 240 ns pulse-width and 17 micro-joules optical energy was produced. By increasing the pumping energy to 1.2 J, two nearly similar QS laser pulses were generated. Moreover, we have proposed a method for decreasing the pulse-width and increasing the energy of single QS laser pulse that is based on controlling the pumping rate by shaping the current of LEDs.
    Keywords: passive Q-switch, LED pumping, Ce: Nd: YAG laser
  • B Rajabi , A Mehramiz * Pages 485-489
    The purpose of this paper is to present a new generalized form of the Appleton-Hartree formulation. To that end, we use a system of linearized quantum plasma equations to include quantum corrections due to the quantum force produced by the density fluctuations of electrons. Dispersion relations and their modifications resulting form quantum effects are derived for both quasi-parallel and quasi- perpendicular wave modes. In comparison to the previous studies, the results show that quantum effects modify the dispersion of the whistler, helicon, left-handed, ordinary and extraordinary waves. Furthermore, the analysis of results, in particular cases, confirms those of previous studies and, in limiting cases, leads to known relationships in classical plasma physics.
    Keywords: quantum plasma, quantum force, electromagnetic waves
  • M Dadsetani*, H Nejatipour Pages 41-51
    By means of ab-initio calculations on the basis of the FPLAPW method, we compared the energy loss near edge structure (ELNES) of carbon K edges in crystalline phenanthrene and its isomer, anthracene. In these two organic compounds, different non-equivalent carbon atoms can result in distinct K edge spectra due to the different carbon-carbon bond lengths, as a characteristic behavior of the molecular crystals. The smaller bond lengths push the ELNES features to the higher energies. In anthracene, the energy position of the edge-onset appears at lower energies due to its smaller electronic band gap. At the onset of the C K edge of anthracene, the strong splitting of the π* peak into two peaks is observable. Compared to the C K edge in anthracene, due to the slightly larger C–C bond length in phenanthrene, the peak position of the main σ structure has a red shift. The ELNES spectrum of crystalline phenanthrene includes electron transition of 1s carbon orbital to π* and σ* states. In anthracene, the first two intense features have contributions of π* orbitals. Consideration of the core-hole approximation by means of super-cells and the collection of semi-angles at magic value are essential to obtain reasonable ELNES spectra.
    Keywords: organic molecular crystals, phenanthrene, anthracene, ELNES, density functional theory
  • R Sabet Dariani , R Bakhshandeh , H Haghi * Pages 53-58
    It is important to examine the factors that determine the properties of graphene. Various factors affect the properties of graphene nanosheets that can revolutionize the use of graphene. One such factor is ultrasonic waves, which have significant effects on graphene properties. In this research, we studied the effect of ultrasonic waves with different power levels (35, 50, 360, and 420 W) on four graphene samples. in this research all the samples fabricated by electrochemical exfoliation. In this method, ammonium sulfate nonorganic salt was used for producing solution and used electrodes PT and graphite where +10 volt was applied to the electrodes Ultrasonic waves are used to homogenize the electrolyte for samples. And samples were analyzed using scanning electron microscope (SEM) imaging and Fourier transform infrared spectroscopy (FTIR) spectroscopy to determine their structure and electrical properties. The I-V curves of the samples were measured after spraying the glass substrate. Then, FTIR spectra and I-V characteristics were studied. Our results showed that with increasing ultrasonic power, FTIR spectra did not change, however conductivity of grown graphene increases.
    Keywords: Graphene, Electrochemical, Ultrasonic Wave, FTIR, SEM
  • S Bhattacharya*_M. D Moinul Islam _S Basu _D Halder _A De Pages 59-69
    Accurate detection of weak periodic signals within noise and possibility of secure messaging have made Duffing oscillator (DO) highly important in the field of communication. Investigation on the properties of DO is thus ardently sought for. An elegant approach to accomplish the same is to fabricate electronic circuit simulating DO non-linear equation and to study the effect of input signal amplitude (Vin) and frequency (f), disentangling each other. Recently, Vin-driven chaotic dynamics was studied by constructing a simple Duffing-Holmes (DH) oscillator circuit. However, the f-driven characteristics of the oscillator remain unknown at constant Vin. The present work is based on the MATLAB simulation of f-driven chaotic dynamics of the DH equation. Similar output, mixed with chaos and non-chaos, is obtained by constructing the circuit, both in lab and PSPICE simulation. The circuit moves into complete chaos at f=270 Hz, while period-2 bifurcation appears at f=680 Hz for constant Vin 0.9V. The chaos control is also achieved by two simple methods. In the first method, the variation of circuit parameter (capacitance) induces chaos control. In the second method, synchronization is achieved by coupling two similar oscillators. These two methods, though apparently simple, could be highly beneficial for using DH in secure communication.
    Keywords: Nonlinear dynamics, chaos, Duffing-Holmes oscillator, electronic circuit, MATLAB, PSPICE, chaos control
  • M Amirabbasi*, E Abdolhosseini Sarsari Pages 71-77
    In this paper, the reported experimental data related to electrical transport properties in bulk ZnO, ZnMgO/ZnO and ZnMgO/ZnO/ZnMgO single and double heterostructures were analyzed quantitavely and the most important scattering parameters on controlling electron concentration and electron mobility were obtained. Treatment of intrinsic mechanisms includes polar-optical phonon scattering, piezoelectric scattering and acoustic deformation potential scattering. For extrinsic mechanisms, ionized impurity, dislocation scattering and strain induced fields are included. For bulk ZnO, the reported experimental data were corrected for removing the effects of a degenerate layer at the ZnO/sapphire interface via a two – layer Hall – effect model. Also, donor density, acceptor density and donor activation energy were determined via the charge balance equation. This sample exhibits hopping conduction below 50K and dislocation scattering controls electron mobility closely. Obtained results indicate that enhancement of electron mobility in double sample as compared with single one can be attributed to reduction of dislocation density, two dimensional impurity density in the potential well due to background impurities and/or interface charge and strain induced fields which can be related to better electron confinement in the channel and enhancement in sheet carrier concentration of 2DEG in this sample.
    Keywords: 2DEG, Bulk mode, Heterostructure, Transport properties
  • S A Ghasemi*_A Mazandarani _S Shahshenas Pages 79-86
    In this paper, plasma main characteristics such as electron mean temperature, electron number density, and oscillation frequency have been measured experimentally using the double Langmuir probe diagnostic system. In our experiment, the plasma was generated by applying the low pressure dc glow discharge in several common gases. The experimental results indicated the highest plasma density and oscillation frequency for the plasma originating from Argon and the highest mean value of temperature for Hydrogen plasma. The experimental results were then confirmed by COMSOL simulator, showing reasonable consistency with the simulations. The data were then used to compare the degree of ionization with the measured plasma parameters.
    Keywords: double Langmuir probe, glow discharge, COMSOL simulator
  • M Mokari_Behbahan*_Y Shahamat _M H Alamatsaz _A A Babaei_Brojeny _H Moeini Pages 87-90
    In this article, by using the method of finite difference time domain (FDTD) and PML boundary conditions, we have studied the photonic band gaps for TE and TM modes in square and triangular lattices consisting of air holes in dielectric medium and compared the results. In addition, the effect of nonlinearity of the photonic crystal background on the photonic band gaps and comparison with the results of the linear case (holes in a background medium with linear dielectric constant) has been presented. Comparison of the transmission spectrums in linear and nonlinear cases shows a red shift in minimum transmission for both triangular and square lattices.
    Keywords: Photonic Crystals, Nonlinear Materials, Band Gaps, TE -TM modes
  • M Vahdati*, S Rasouli Pages 91-105
    Magnetic abrasive finishing (MAF) can be classified as non-traditional super finishing method for finishing surfaces with different shapes and working materials like flat plates, shafts, bearings parts, screws, tubes and many other mechanical parts that need a good surface finishing properties. MAF is effective in polishing, cleaning, deburring and burnishing metal parts. The most important parameter affecting the results of this method such as surface roughness is the magnetic force. The magnetic force is obtained from a permanent Magnet or a DC magnet.
    In this article, Study of the magnetic field strength, magnetic flux density and magnetic force in different states is performed using simulation with a finite element method software (Maxwell). The shapes of magnets, various sizes and material of fixture are studied. The magnetic properties of the material of the work piece are simulated. To verify the simulation results, the situation is also measured by a Gauss meter. The intensity of the magnetic field required for the micro chipping obtained for the different geometric shapes and various materials of work piece in Magnetic Abrasive Finishing process. Results show Increasing the distance from the magnet surface, results in a decrease in magnetic flux density and significance of the edge phenomenon effect. The effect of work piece material, work piece fixture material and the interaction of them were significant on magnetic flux density.
    To concentrate magnetic abrasive powder in the polishing process of non-ferromagnetic parts, the ferromagnetic fixture for these parts can be provided.
    Keywords: magnetic abrasive finishing, design of experiments, simulation, magnetic flow density, teslameter
  • V U M Rao*_M Vijaya Santhi _K V S Sireesha _N Sandhya Rani Pages 107-116
    Spatially homogeneous Bianchi type-II, VIII & IX anisotropic as well as isotropic cosmological models is obtained in a scalar tensor theory of gravitation proposed by Saez and Ballester (1986) when the source for energy momentum tensor is a bulk viscous fluid containing one dimensional cosmic strings. All the models obtained and presented here are expanding, non-rotating and accelerating. Also some important features of the models, thus obtained, have been discussed.
    Keywords: Bulk viscosity_Cosmic strings_Saez – Ballester theory_Bianchi type - II- VIII & amp- IX metrics