فهرست مطالب

دندانپزشکی دانشگاه علوم پزشکی تهران - سال سی و یکم شماره 1 (پیاپی 94، بهار 1397)

مجله دندانپزشکی دانشگاه علوم پزشکی تهران
سال سی و یکم شماره 1 (پیاپی 94، بهار 1397)

  • تاریخ انتشار: 1397/04/04
  • تعداد عناوین: 8
|
  • سیده فاطمه بصری، رفعت باقری*، مریم سادات توانگر صفحات 1-10
    زمینه و هدف
    یکی از شایع ترین علل عدم موفقیت ترمیم های کامپوزیتی شکستن و تغییر رنگ این ترمیم ها می باشد. لذا هدف از این مطالعه بررسی میزان نیروی چقرمگی شکست و تغییر رنگ 3 کامپوزیت نانوهیبرید در محیط خشک و مرطوب به مدت 60 روز بود.
    روش بررسی
    سه نوع کامپوزیت رزینی انتخاب شد. برای هر ماده 36 نمونه مستطیلی آماده شد و به صورت تصادفی به دو گروه تقسیم شده و در دمای 37 درجه سانتی گراد در محیط خشک یا درون آب مقطر قرارداده شدند. در هر گروه نمونه ها بر اساس مدت زمان نگهداری (1، 7 و 60 روز) به سه زیرگروه کوچک تر تقسیم شدند (6n=). پس از هر دوره زمانی به منظور انجام آزمایش نیروی چقرمگی شکست، نمونه ها در دستگاه تست فشار قرار داده شدند و با سرعت 5/0 میلی متر در دقیقه تحت نیروی فشاری قرار گرفتند. رنگ اولیه و نهایی نمونه ها نیز توسط دستگاه اسپکتروفتومتر ثبت شد. داده های به دست آمده با آزمون های آماری ANOVA و Kruskal-Wallis ارزیابی شد.
    یافته ها
    میانگین نیروی چقرمگی شکست همه مواد در بازه زمانی 60 روز در محیط مرطوب کمتر از محیط خشک بود. اما بجز در مورد aura Bulkfil (001/0P=). برای بقیه تفاوت معنی دار نبود. تغییر رنگ برای Tetric Evoceram Bulkfilو حتی به میزان بیشتری برای aura Bulkfil در محیط مرطوب و خشک به طور معنی داری متفاوت بود (004/0P=). بالاترین ثبات رنگ درaura وکمترین در Tetric Evoceram دیده شد.
    نتیجه گیری
    نگهداری نمونه ها در محیط مرطوب نسبت به محیط خشک، میزان استحکام به شکست کمتر و تغییر رنگ بیشتری را نشان دادند.
    کلیدواژگان: کامپوزیت نانو هیبرید، چقرمگی شکست، تغییر رنگ، محیط خشک و مرطوب
  • عباسعلی خادمی، سید امیر موسوی*، عزیزاله مرادی طلب، شیرین شاه ناصری، صابر خزاعی، ریحانه تجلی صفحات 11-17
    زمینه و هدف
    میکروارگانیسم ها مهم ترین علت التهاب پالپ دندانی و نواحی پری اپتیکال هستند که ناشی از عدم سیل مناسب و کافی کانال ها و نواحی انتهایی آن ها و در نتیجه میکرولیکیج و نفوذ میکروارگانیسم ها می باشد. بنابراین، هدف از این مطالعه بررسی میزان سیل شدن کانال ها ددان توسط ProRoot MTA و Bio MTA با تکنیک Fluid infiltration بود.
    روش بررسی
    در این مطالعه تجربی آزمایشگاهی از 46 دندان تک کانال پره مولر فک پایین انسان استفاده شد. پس از آماده سازی و ضد عفونی دندان ها توسط محلول 3% هیپوکلریت سدیم، تاج آن ها از ناحیه سرویکال قطع شد. سپس دندان ها به طور تصادفی به چهار گروه تقسیم گردیدند: گروه 1Bio MTA (20n=)، گروه 2 MTA ProRoot(20n=) و گروه های کنترل منفی و مثبت که هر کدام شامل 3 دندان بودند. آماده سازی کانال دندان ها توسط روش step back انجام شد. سپس دندان های پر شده، توسط روش فیلتراسیون مایع مورد ارزیابی توانایی سیل و جلوگیری از لیکیج قرار گرفتند. اطلاعات به دست آمده با کمک آنالیز من ویتنی و آزمون توکی تحلیل آماری شدند (05/0α=).
    یافته ها
    نتایج حاصل از آنالیز آماری نشان داد که اختلاف معنی داری بین میزان قدرت سیل کنندگی ماده MTA ProRoot و ماده Bio MTA وجود نداشت (05/0P>). ریزنشت کمتر اما غیر معنی دار در گروه Bio MTA نسبت به گروه ProRoot MTA بود.
    نتیجه گیری
    این مطالعه نشان داد که از MTA ProRoot و Bio MTA می توان به عنوان ماده سیل کننده کامل کانال استفاده کرد.
    کلیدواژگان: ریز نشت، پرکردن کانال، فیلتراسیون مایع، مینرال تیری اکساید اگریگیت (MTA)
  • سروین سرمدی، بهراد تنباکوچی*، جواد چلیپا، فهیمه سلیمی، مهرداد پنج نوش صفحات 18-26
    زمینه و هدف
    درمان با دستگاه فانکشنال مندیبل را در یک موقعیت قدامی تر و تحتانی تر قرار می دهد. وضعیت زبان و فضای اروفارنکس ارتباط قابل توجهی با موقعیت مندیبل دارند. بنابراین هدف از مطالعه حاضر تعیین تغییرات موقعیت زبان و فضای اوروفارنکس به دنبال درمان با دستگاه Twin-block در بیماران نوجوان با مال اکلوژن کلاس II گروه 1 بود.
    روش بررسی
    22 بیمار (14 دختر با میانگین سنی 5/11 سال، 8 پسر با میانگین سنی 5/12 سال) که تحت درمان با دستگاه Twin-block بوده اند، انتخاب شدند. سفالوگرام ها به منظور اندازه گیری های خطی استفاده شدند. الگوی Graber و پارامتر مک نامارا به ترتیب به منظور ارزیابی موقعیت زبان و فضای اروفارنکس انتخاب شدند. آنالیز داده ها با استفاده از آزمون paired t-test انجام شد.
    یافته ها
    یافته های مطالعه حاضر افزایش قابل ملاحظه ای در موقعیت قدامی زبان نشان داد (06/0P<). فضای اوروفارنکس نیز به طور قابل ملاحظه ای افزایش یافت (001/0P<). همبستگی معنی داری بین کاهش ANB و افزایش قدامی خلفی فضای اوروفارنکس وجود داشت.
    نتیجه گیری
    دستگاه Twin-block سبب حرکت قدامی قابل ملاحظه زبان و افزایش معنی دار فضای اوروفارنکس در بعد ساژیتال می شود.
    کلیدواژگان: زبان، اروفارنکس، دستگاه فانکشنال
  • علیرضا هاشمی آشتیانی، علی روحانی*، سارا خلقی صفحات 27-33
    زمینه و هدف
    مقاومت دندان های مصنوعی در برابر سایش ، تاثیر زیادی در دوام و طول عمر دست دندان دارد. هدف از این پژوهش ارزیابی و مقایسه میزان سایش سه نوع دندان مصنوعی کامپوزیتی با نمونه آکریلی بود.
    روش بررسی
    در این پژوهش از چهار نوع دندان مصنوعی شامل یک نوع آکریلی (ایوکلار) و سه نمونه کامپوزیتی (ایوکلار، اپل و یاماهاچیتا) استفاده شد. 10 دندان مصنوعی پره مولر فک بالا از هر نوع دندان مصنوعی ، در آکریل خود سخت شونده ثابت شدند و آزمون سایش به تعداد 1000 و 2000 چرخه انجام شد. ارتفاع و وزن دندان ها قبل و بعد از هر سری سایش توسط یک میکروسکوپ نوری و ترازوی دیجیتال با دقت 001/0 گرم اندازه گیری شد. داده ها به وسیله آزمون آماری ANOVA و آزمون تکمیلی Duncan مورد بررسی و مقایسه قرار گرفتند (05/0=P).
    یافته ها
    در در تعداد چرخه های 1000 و 2000 دور تفاوت معنی داری بین میانگین سایش دندان های کامپوزیتی و آکریلی ایوکلار از نظر ارتفاع وجود نداشت (05/0
    نتیجه گیری
    یافته های حاصل از این مطالعه پیشنهاد می کند که دندان های مصنوعی کامپوزیتی یا آکریلی ایوکلار می توانند گزینه های مناسب تری نسبت به سایر دندان های استفاده شده در این تحقیق برای کاربرد در کیس های با احتمال سایش بیشتر باشند.
    کلیدواژگان: دندان مصنوعی، بیس رزینی، مقاومت به سایش
  • فرشته بقایی نایینی، شیوا گندمی، پویان امینی شکیب، نازنین مهدوی، منیر مراد زاده، محمد جواد خرازی فرد، مائده قربان پور* صفحات 34-41
    زمینه و هدف
    سازمان جهانی بهداشت (WHO= World health organization) در سال 1978 تعریف هیستوپاتولوژیکی را جهت تشخیص OLP (oral lichen planus) ارائه داد. مطالعات قبلی نشان دادند که این معیارها از پایایی کافی برخوردار نیستند. در سال 2003 معیارهای modified WHO توسط van der Meij و همکاران ارائه شد که شامل معیارهای تجدید نظر شده بالینی و هیستوپاتولوژیک می باشد. هدف از این مطالعه بررسی پایایی درون مشاهده گر و بین مشاهده گر در ارزیابی هیستوپاتولوژیک OLPبر اساس معیارهای modified WHO بود.
    روش بررسی
    55 لام میکروسکوپی که لیکن پلان و ضایعات لیکنوئیدی دهان در تشخیص بالینی آن ها مطرح بوده است، در 2 فاز اجرایی، با فاصله 3 ماه در اختیار 6 مشاهده گر قرار گرفت تا بر اساس معیارهای هیستوپاتولوژیک modified WHO، یکی از تشخیص های OLP و یا compatible with OLP را انتخاب کنند، سپس با اطلاعات حاصل، پایایی بین مشاهده گر و درون مشاهده گر از طریق آنالیزهای Kappa و ضریب تکرار پذیری (Repeatability coefficient) محاسبه شد.
    یافته ها
    نتایج این مطالعه نشان می دهد که پایایی معیارهای modified WHO در بررسی بین مشاهده گر، قوی (77/0) و در بررسی درون مشاهده گر، متوسط تا قوی (82/0-58/0) می باشد.
    نتیجه گیری
    در این مطالعه پایایی درون مشاهده گر و بین مشاهده گر در ارزیابی هیستوپاتولوژیک OLP بر اساس معیار های modified WHO، در مقایسه با نتایج مطالعات دیگر در مورد معیار هایWHO، قوی تر می باشد، اما پیشنهاد جایگزین کردن این معیارها با معیارهای WHO نیاز به مطالعات بیشتر با تعداد نمونه بیشتر و مقایسه این دو تکنیک با یکدیگر دارد.
    کلیدواژگان: لیکن پلان دهانی، پایایی مشاهده گر، معیارهای تشخیصی
  • رقیه علی اکبری، محمد واحدیان شاهرودی، هادی طهرانی*، حبیب الله اسماعیلی، رجبعلی حکم آبادی صفحات 42-48
    زمینه و هدف
    حرفه دندانپزشکی یکی از آسیب رسان ترین حرفه هاست که به دلیل عدم آگاهی دندانپزشکان از وضعیت ارگونومیکی صحیح در حین کا، بیشترین آسیب و درد را برای آنان به همراه دارد. هدف از این تحقیق بررسی وضعیت ارگونومیکی دندانپزشکان شهرستان بجنورد به روش RULA بود.
    روش بررسی
    در این مطالعه توصیفی- تحلیلی تمام دندانپزشکان شهرستان بجنورد مورد مطالعه قرار گرفتند. جهت بررسی وضعیت ارگونومیکی و اسکلتی- عضلانی به ترتیب از روش های RULA و پرسشنامه نوردیک استفاده گردید. تجزیه و تحلیل با نرم افزار SPSS ویرایش 22 و با بهره گیری از آزمون های آماری رگرسیون و کای دو، انجام و سطح معنی داری 05/0>P در نظر گرفته شد.
    یافته ها
    بیشترین ناراحتی اسکلتی- عضلانی گزارش شده به ترتیب با 6/55% (35 نفر) مربوط به پشت، 54% (34 نفر) مربوط به شانه و 8/50% (32 نفر) درد کمر و 6/47% (30 نفر) درد گردن بوده است. در 12 ماه گذشته 5/90% افراد گزارش درد از حداقل یکی از اندام ها را داشته اند و 27% در اثر درد مجبور به ترک کار شده اند که جنسیت (84/0P=) و قد (75/0P=) و وزن (38/0P=) با این مورد ارتباط معنی داری نداشته است.
    نتیجه گیری
    با توجه به نتایج این مطالعه انجام مداخلات آموزشی جهت پیشگیری از تغییر وضعیت اسکلتی در دندانپزشکان ضروری است.
    کلیدواژگان: دندانپزشک، اختلالات اسکلتی- عضلانی، ارگونومی، پرسشنامه نوردیک
  • حمید بخشی، نرگس سادات میرجلیلی*، زینب کاظمی زاده، فواد ایرانمنش، رئیسی استبرق صفحات 49-57
    مقدمه و هدف
    پیشرفت تحصیلی دانشجویان دندانپزشکی، به رغم استعداد ذاتی و دستاوردهای تحصیلی قابل توجه، تحت الشعاع انگیزش یادگیری قرار می گیرد. این مطالعه با هدف بررسی عوامل موثر انگیزش یادگیری از دیدگاه دانشجویان دندانپزشکی دانشگاه علوم پزشکی رفسنجان طراحی و اجرا شده است.
    روش بررسی
    در این مطالعه توصیفی- مقطعی 120 نفر از دانشجویان دندانپزشکی پرسشنامه انگیزش یادگیری را تکمیل نمودند. این ابزار دارای 33 سوال در دو گروه انگیرش درونی و بیرونی و خرده مقیاس های آن ها بود. متغیر های پیشرفت تحصیلی، جنس، وضعیت سکونت و تاهل نیز بررسی شد. داده ها در نرم افزار آماری SPSS17 ثبت شدند و سپس با استفاده از آزمون های توصیفی و تحلیلی t-test و ANOVA و ضریب همبستگی پیرسون تجزیه و تحلیل شدند.
    یافته ها
    نمره انگیزش درونی و بیرونی دانشجویان از کل نمره 5، 32/0±98/2 بود. نمره ی انگیزش درونی (48/0±16/3) و انگیزش بیرونی(44/0±82/2) تفاوت آماری مشخصی را نشان می دهند (05/0>P). همبستگی بین پیشرفت تحصیلی و ابعاد انگیزش یادگیری (درونی، بیرونی) و خرده مقیاس های انگیزش بیرونی بسیار ضعیف بود و معنی دار نبود (62/0=P). نمره کل انگیزش درونی و بیرونی در دانشجویان مذکر و غیر بومی بیشتر بود.
    نتیجه گیری
    انگیزه تحصیلی دانشجویان دندانپزشکی رفسنجان در سطح متوسط بود. انگیزه های درونی برای یادگیری در دانشجویان پسر بیشتر از انگیزه های بیرونی بود.
    کلیدواژگان: پیشرفت تحصیلی، انگیزه تحصیلی، انگیزش درونی و بیرونی
  • حسینعلی ماهگلی، سمیه اللهیاری* صفحات 58-63
    در سال های اخیر استفاده از زیرکونیا به عنوان کور ساپورت کننده با استحکام بالا در رستوریشن های تمام سرامیک مقبولیت زیادی یافته است. موارد شکست ایجاد شده در رستوریشن های زیرکونیایی عمدتا به دلیل ضعف در توده پرسلن ونیر و عوامل دیگری از جمله روش ونیر می باشد. غیر از روش متداول ونیر دستی، روش های دیگری از جمله پرس و ونیر دیجیتال اخیرا معرفی و مورد استفاده قرار گرفته اند. از سویی دیگر استفاده از زیرکونیای مونولیتیک بدون ونیر نیز راه حلی برای کاهش شکست می باشد. هدف از این مطالعه، مروری بر مقالاتی بود که به مقایسه سه روش موجود برای ونیرینگ رستوریشن های زیرکونیا پرداخته اند و مقایسه تاثیر این روش ها بر میزان شکست (failure) رستوریشن های زیرکونیایی و همچنین مقایسه با زیرکونیای مونولیتیک می باشد. در متن این مطالعه مروری 42 مقاله در بازه سال های 2000 تا پایان 2016 با استفاده از کلید واژه های مرتبط از موتورهای جستجوگر PubMed، google scholar استفاده شدند. در اغلب مقالات، روش ونیرینگ دیجیتالی به عنوان بهترین روش ونیرینگ با کمترین میزان شکست گزارش شده است و همچنین خصوصیات مکانیکی زیرکونیای مونولیتیک بالاتر از زیرکونیای ونیر شونده با روش دستی بوده است.
    کلیدواژگان: سرامیک ونیر، CAD-CAM، شکست
|
  • Seyyede Fateme Basri, Rafat Bagheri *, Maryam Sadat Tavangar Pages 1-10
    Background And Aims
    Fracture and color change are among the most common causes of clinical failure of resin composite restorations. Therefore, this study aimed to examine the fracture toughness and color changes of 3 Nano-hybrid resin composites in dry and wet conditions.
    Materials And Methods
    Three resin composites were studied. A total of 36 rectangular specimens were prepared for each material, randomly divided into 2 groups, and stored at 37°C dry or soaked in distilled water. In each group, the specimens were subdivided into three groups (n=6) and stored for 1, 7, and 60 days. After each time interval, the specimens were tested for the fracture toughness and loaded at a cross-head speed of 0.5mm/min using a universal testing machine. The baseline and final color measurement was recorded for each specimen using a spectrophotometer. The collected data was analyzed using ANOVA and Kruskal-Wallis tests.
    Results
    After 60 days, the mean value of fracture toughness was lower in the wet condition compared to that of dry condition. However, it was not significantly different except for aura Bulkfil (P=0.001). Color change was significantly different for Tetric Evoceram and aura with a greater value in the wet condition compared to that of dry (P=0.004). The greatest color stability was found for aura and the least for Tetric Evoceram.
    Conclusion
    In this study, most of the materials stored in a dry condition showed a greater fracture toughness and color change.
    Keywords: Nano-hybrid resin composite, Fracture toughness, Color change, Dry, wet conditions
  • Abbasali Khademi, Seyed Amir Mousavi *, Azizolah Moraditalab, Shirin Shahnaseri, Saber Khazaei, Reyhaneh Tajali Pages 11-17
    Background And Aims
    Microorganisms are the main cause of pulpal and periapical diseases. The most important failure factor is the lack of proper seals for the canal, resulting in microbial leakage. Therefore, the purpose of this study was to evaluate the sealing ability of ProRoot MTA and Bio MTA in canal obturation using fluid infiltration.
    Materials And Methods
    In this experimental study, 46 extracted mandibular premolar single canal teeth were used. After preparing and disinfecting the teeth with 3% sodium hypochlorite, their crowns were cut off from the cement-enamel junction. The teeth were then randomly divided into four groups: Group 1 (n=20) Bio MTA, Group 2 MTA ProRoot (n=20), negative and positive control groups, each of them contained 3 teeth. The preparation of teeth was performed using the step back method. The filled teeth were then evaluated by fluid filtration for leakage prevention. Data were analyzed by Mann-Whitney test and Tukey test (α=0.05).
    Results
    The results of statistical analysis showed that there was no significant difference between the MTA ProRoot and Bio MTA in sealing ability (P>0.05). That micro leakage is less in the Bio MTA group than in the ProRoot MTA group, but the difference was not significant.
    Conclusion
    This study showed that MTA ProRoot and Bio MTA can be used as appropriate canal filling materials.
    Keywords: Micro-leakage, Canal filling, Fluid filtration, MTA
  • Sarvin Sarmadi, Behrad Tanbakuchi *, Javad Chalipa, Fahimeh Salimi, Mehrdad Panjnoosh Pages 18-26
    Background And Aims
    Functional therapy locates the mandible in a more anterior and inferior position. Tongue posture and oropharynx space have a considerable relationship with mandibular posture. The aim of the present study was to determine the changes of tongue posture and oropharynx space following treatment with Twin block appliance in adolescent patients with class II division 1 ma1occlusion.
    Materials And Methods
    Twenty two patients (14 girls mean age:11.5, 8 boys mean age:12.5 years) who were treated with twin-block appliance were enrolled. Cephalograms were used to assess the linear measurements. Graber pattern and McNamara parameter were used to evaluate the tongue posture and oropharynx space, respectively. Data analysis was performed by paired t-test.
    Results
    The findings of the present study showed a significant increase in anterior position of tongue (P=0.06). Oropharynx space was increased significantly (P
    Conclusion
    Twin-block appliance caused considerable forward movement of tongue and significant increase of oropharynx space in the sagittal plan.
    Keywords: Tongue, Oropharynx, Functional appliance
  • Alireza Hashemi Ashtiani, Ali Rohani *, Sara Kholghi Pages 27-33
    Background And Aims
    Wear resistance of artificial teeth has an important role in denture longevity. The purpose of this in vitro study was to evaluate the wear resistance of three types of composite resin denture teeth with that of acrylic resin.
    Materials And Methods
    In this study, four types of artificial teeth, including 3 types of composite artificial teeth (Ivoclar, Apple and Yamahachita) and 1 type of acrylic resin artificial teeth (Ivoclar) were used. Ten maxillary first premolars were selected from each set and were fixed in autopolymerising acrylic resin. The wear test was performed for 1000 and 2000 cycles. The heights and weights were measured under a light stereo microscope and scales (0.001 gram accuracy) before and after wear cycles. Data were analysed by ANOVA and Duncan tests (P=0.05).
    Results
    There was no significant difference between the mean wear of the composite and acrylic resin ivoclar artificial teeth in 1000 and 2000 cycles (P>0.05), but this difference was significant between the other artificial teeth (P
    Conclusion
    The findings of this study suggested that Ivoclar composite or acrylic resin denture teeth can be more suitable options than other artificial teeth used in this study in cases susceptible to abrasion.
    Keywords: Artificial teeth, Resin base, Wear resistance
  • Fereshteh Baghai Naini, Shiva Gandomi, Pouyan Aminishakib, Nazanin Mahdavi, Monir Moradzadeh, Mohammad Javad Kharazifard, Maedeh Ghorbanpour* Pages 34-41
    Background And Aims
    In 1978 WHO (World health organization) formulated a histopathological definition for diagnosis of OLP (oral lichen planus). Previous studies showed that diagnosis of OLP with these criteria are not reproducible. In 2003 Van der Meij et al. represented new clinical and histopathologic definition for diagnosis of OLP known as modified WHO criteria. The purpose of this study was to evaluate the interobserver and intraobserver variability in the histopathological assessment of OLP based on the modified WHO criteria.
    Materials And Methods
    Fifty five microscopic slides which OLP and OLL (Oral Lichenoid Lesion) were recognized in their clinical differential diagnosis were given to 6 pathologists in two phases with 3 months interval. Each reviewing pathologist was asked to apply the modified WHO definition of OLP and to categorize each case as either OLP, or compatible with OLP. Then, the interobserver and intraobserver variability were assessed by calculation of repeatability coefficient and Kappa statistics.
    Results
    The results of this study demonstrated that interobserver variability based on modified WHO criteria was 0.77 (strong), while the intraobserver variability varied from 0.58 (moderate) to 0.82 (strong).
    Conclusion
    In the present study, the interobserver and intraobserver variability in the histopathologic assessment of OLP based on modified WHO criteria was stronger than previous studies which assessed WHO criteria. However, in order to propose the replacement of WHO criteria with modified WHO criteria, further studies with more cases and comparing the two methods is required.
    Keywords: Oral lichen planus, Observer variability, Diagnostic criteria
  • Roghieh Aliakbari, Mohammad Vahedian-Shahroodi, Hadi Tehrani *, Habibollah Esmaeili, Rajabali Hokmabadi Pages 42-48
    Background And Aims
    The dentistry profession is one of the most injuring professions that causes most pains and hurts for dentists because of their lack of knowledge about the ergonomic position through the work. The purpose of this study was to assess the ergonomic position of dentists with RULA method in dentists of Bojnord.
    Materials And Methods
    In this cross-sectional study, all of the Bojnord’s county dentists were selected. RULA method and Nowerdik questionnaire were used for investigating the agronomical position, and muscular-skeleton position, respectively. The analysis was done by SPSS22 using regression and chi-square test. A P-value of less than 0.005 was assumed as significant.
    Results
    The most muscle-skeleton reports were 55.6% (35 persons) related to back, 54% (34 persons) related to shoulders, 50.8% (32 persons) related to waist, and 47.6% (30 persons) related to neck aches. In the last 12 months, 90.5% of dentists reported pains from at least one of organs of their bodies and 27% were supposed to leave their works which the sex (P=0.84), length (P=0.75), and weight (P=0.38) were not significantly related to this case.
    Conclusion
    According to the results of this study educational interventions is essential to prevent the musculoskeletal disorders in dentistry.
    Keywords: Dentist, Musculoskeletal disorders, Ergonomics, Nowerdik's questionnaire
  • Hamid Bakhshi, Narges Sadat Mirjalili *, Zeinab Kazemizadeh, Foad Iranmanesh, Elham Reisi Estabragh Pages 49-57
    Background And Aims
    Despite their ascribed intellectual ability and achieved academic pursuits, the dental student’s academic achievement is influenced by learning motivation. This study in an Endeavour aimed to examine the learning motivation factors of dental students of Rafsanjan University of Medical Sciences.
    Materials And Methods
    In this descriptive-cross sectional study, 120 dental students completed the questionnaire which comprised of 33 questions regarding intrinsic and exogenic motivational factors. Demographic factors (gender, marital and native status, employment year of study) were examined. Data were analyzed by SPSS17 software. Descriptive and analytical statistical methods (t-test, Pearson correlation and ANOVA statistical tests) were used.
    Results
    The mean of the achieved scores in the domains of learning motivation was 2.98±0.32 out of 5,which was considered as moderate level. Comparing the means of the intrinsic (3.16±0.48) and exogenic (2.82±0.44) domains showed significant differences (P
    Conclusion
    Educational motivation of Rafsanjan dental students was moderate. In learning, intrinsic motivational factor was more than exogenic factors in male students.
    Keywords: Academic achievement, Academic motivation, Intrinsic, exogenic motivational
  • Hoseinali Mahgoli, Somayeh Allahyari * Pages 58-63
    In recent years, the use of zirconia as a high-strength support for all-ceramic restorations has become widely accepted. The failure of zirconia restorations is mainly due to the weakness of veneering porcelain and other factors such as veneering approach. Except conventional hand layering, other methods such as pressing and digital veneering have been recently introduced and used. Meanwhile, the use of monolithic zirconia with no veneer is also a solution for reducing the rate of failure. The object of this review was to compare the failure of three available methods for veneering zirconia restorations in the literature and to compare with the monolithic zirconia. In the context of this overview, 42 articles were used between the years 2000 through the end of 2016 using the keywords of PubMed, google scholar search engines. In most articles, digital approach is the best way with low failure. mechanical properties of monolithic zirconia are reported to be higher than the zirconia veneered using hand layering method.
    Keywords: Veneering ceramic, CAD-CAM, Fracture