فهرست مطالب

Scientia Iranica
Volume:15 Issue: 7, 2008

  • تاریخ انتشار: 1387/09/11
  • تعداد عناوین: 14
|
  • Solid Trichlorotitanium (IV) Trifluoromethanesulfonate TiCl_ 3(OTf) Catalyzed Highly Efficient Protection of Aldeyhydes as their Acylals at Room Temperature under Solvent-Free Conditions
    H. Firouzabadi Page 1
    TiCl_3(OTf) catalyzed efficiently the protection of aromatic aldehydes with acetic anhydride in the absence of solvent at room temperature with excellent yields. By this method, aliphatic aldehydes were also converted to their corresponding acylals, in the presence of a mixture of acetic anhydride and acetic acid at high yields.
  • Determination of Mercury and Methylmercury in Aqueous Samples by Cold Vapor Atomic Absorption Spectrometry after Pre-Concentration with Bis (2-Mercaptobenzothlazole) Immobilized on Microcrystalline Naphthalene
    S.M. Talebi Page 2
    A method based on cold vapor atomic absorption spectrometry was used for the determination of trace mercury (Hg^{+2}) and methylmercury MeHg^+) in aqueous samples. The mercury in the sample was concentrated in a column packed with bis (2-mercaptobenzothiazole), immobilized on microcrystalline naphthalene. The method was optimized for different parameters affecting the pre-concentration process, in order to obtain better sensitivity. The recovery test showed that the method is quite reliable for use in the determination of trace amounts of mercury in aqueous samples. The method was applied to the speciation of mercury in river water and in the effluents of wastewater treatment plants.
  • DFT/B3LYP Study of Thermochemistry of D-Glucosamine, a Representative Polyfunctional Bioorganic Compound
    M. Fattahi Page 3
    D-glucosamine, as a representative polyfunctional compound, is a bioactive amino sugar. In this study, the gas phase thermochemical properties of D-glucosamine, including its Metal Ion Affinity (MIA), metal binding sites, Anion Affinity (AA), acidity and proton affinity, have been explored, using the Density Functional Theory (DFT) and a 6-311++G^{**}basis set. The summary of the MIA and AA results (in kcal/mol^{-1}) are: Li^+=67.6, Na^+=51.1, K^+=37.3, Mg^{2+}=207.9, Ca^{2+}=150.4, Zn^{2+}=251.2, Cl^-=27.4, CN^-=28.0. The acidity values calculated at different sites, including four -OH groups and one -NH_2 group, range from 344.0 to 373.0 kcal/mol^{-1}. These results, surprisingly, indicate how drastically the presence of multiple -OH and -NH_2 groups may vary the thermochemical properties of a polyfunctional bioorganic compound, such as D glucosamine.
  • Determination of Traces of 2,4-Dichlorophenoxy Acetic Acid in Environmental Samples
    A. Safavi Page 4
    Sensitive determination of 2,4-dichlorophenoxy acetic acid (2,4-D) was studied at a static mercury drop electrode in aqueous media and in the presence of Britton-Robinson buffer as the electrolyte. In this study, the electroinactive 2,4-D was first converted to electroactive nitrated 2,4-D. Subsequent determination was carried out by differential pulse polarography. Under optimum conditions (pH = 11; \nu=90 mV s^{-1}; modulation amplitude = 120 mV), the relative standard deviation was 4.5% and limit of detection in terms of nitrated 2,4-D was 5 \mug L^{-1} ($.88\times10^{-8} M) with linear concentration range from 8 to 300 \mug L^{-1}(3\times10^{-8}1.12\times10^{-6}M). The proposed method offered high sensitivity as well as good selectivity. A mechanistic study, showed four-electron reduction of nitrated 2,4-D to its hydroxylamine derivative. The proposed method was, also, applied to the determination of 2,4-D in environmental samples such as soil samples.
  • Thermal Behavior of Alkaline Lead Acetate, a Study of Thermogravimetry and Differential Scanning Calorimetry
    S.A.A. Sajadi Page 5
    The compound, alkaline lead acetate, Pb(CH_3COO)_2^.PbO^.H_2O (ALA), was purchased from the Fluka Company. The X-ray diffraction film and SEM electron microgaph of this compound were obtained and reported in this paper for the first time. The thermal behavior of alkaline lead acetate (ALA) was studied using thermogravimetery (TGA) and Differential Scanning Calorimetery (DSC) techniques under an O_2 gas atmosphere from 25 to 60 \degree C. Four distinct energy changes associated with weight changes were observed, all of them being exothermic in the DSC results. The amount of \Delta H for each peak is reported.
  • KBr Catalyzed Oxidation of Alcohols and Trimethylsilyl and Tetrahydropyranyl Ethers with Fe(NO_3)_3.9H_2O
    F. Shirini Page 6
    Alcohols and trimethylsilyl and tetrahydropyranyl ethers are efficiently oxidized to their corresponding carbonyl compounds, using Fe(NO_3)3.9H_2O, in the presence of KBr, under mild and completely heterogeneous reaction conditions, with good to high yields.
  • Potentiometric Chromate Quantification Based on Interaction with N, N Butylen Bis (Saliciliden Iminato) Copper (II)
    M. Mazloum Ardakani Page 7
    A new chromate-selective electrode, based on the N, N'' butylen bis (saliciliden iminato) copper (II) complex as the membrane carrier, was developed. The electrode exhibited a good Nernstian slope of -28.8\pm0.5 mV/decade and a linear range of 3.0\times10^{-6}-1.0\times10^{-1} mol.L^{-1} for chromate. The limit of detection was 3.0\times10^{-6} mol.L^{-1}. It had a fast response time of 5-10 sec and could be used for more than three months. The selective coefficients were determined by the Fixed Interference Method (FIM). A chromate-selective electrode could be used in the pH range of 6.5 10.5. It was employed as an indicator electrode for the direct determination of chromate in real samples.
  • Al(HSO_4)_3 Mediated for the Preparation of Primary Carbamates under Solvent-Free Conditions
    A.R. Modarresi, Alam Page 8
    Al(HSO_4)_3 as an acidic salt, i.e. a mild, convenient and efficient reagent, was applied for the conversion of compounds containing a hydroxyl group to primary carbamates, at room temperature, with high yield and purity and without any epimerization, under solvent-free conditions.
  • Application of Response Surface Methodology in Study of the Product Yield Distribution of Thermal Cracking of Atmospheric Gasoil
    J. Towfighi Page 9
    In order to determine the yield distribution of thermal cracking of gasoil, a pilot plant was designed and setup. A systematic experimental design was utilized based on CCD (central composite design). The feed flow rate, steam ratio and temperature were considered as factors to design the experiments. Some statistical models were tuned based on the results of conducted experiments. The models were evaluated with lack-of-fit and R squared tests. The results of the analysis proved that the models fitted well with the experimental results of the considered products. Based on the experiments and statistical models the pilot plant was optimized in order to maximize the net profit. At the optimum point coil outlet temperature, the feed flow rate and steam ratio were, respectively, equal to 843.8\degree C, 6.02 g/min and 0.46. Regarding these conditions, the yield of ethylene, propylene and butadiene and rate of coke formation would be 23.82 wt%, 12.13 wt%, 2.42 wt% and 14.44\times10^{-7} g/cm^2.sec, respectively.
  • Essential Components of an Integrated Data Mining Tool for the Oil and Gas Industry with an Example Application in the DJ Basin
    Sh.D. Mohaghegh Page 10
    Data mining seems to be the new buzz word. During the past several years many industries other than the oil and gas industry have realized the potential benefits of data mining and have established sophisticated operations in order to implement this exciting technology in their respective organizations. Data mining is not new. It has been around for many years. What is new about its current implementation is the incorporation of machine learning techniques. The oil and gas industry has become familiar with machine learning techniques since the early 1990s. Neural networks, genetic optimization and fuzzy logic have been used in numerous applications, from well log interpretations to hydraulic fracturing optimization. Therefore, the new interest in data mining in this industry is not surprising. The industry is at its peak state for benefiting from what data mining has to offer, thanks to an abundance of digital data. A word of caution is in order, which is the main motivation behind writing this paper. As with many other new tools and technologies, the term ``Data Mining'' can be, and is currently being, misused on several occasions. In this paper, an attempt has been made to answer questions such as; what is Data Mining? How can it be accomplished? What are the essential components of an integrated data mining process and what would be the benefits of such a process? In addition to answering questions such as those mentioned above, this paper will provide a road map (a set of guidelines) for a successful data mining project. Finally, the paper concludes by applying the presented guidelines to a hydraulic fracturing data set in the DJ basin of the United States Rockies for a data mining study.
  • Feed Stuff Production from Methanol by Methylotrophic Microorganisms
    G.M. Zamani Page 11
    Methanol has been of great interest as a substrate for production as a novel feed grade protein in Iran. Up to 160 methylotrophic strains were isolated at the Jahad-e Agriculture Research Engineering Center for Scientific Research and various batch experiments were carried out at different pH, temperature, agitation, aeration rate and methanol concentrations. By the sexperiments, optimum production conditions were determined for one of the strains using the Taguchi method. The results showed optimum pH around 8 at temperatures of 26 to 30\degree C, aeration equal to 3 vvm and agitation about 800 rpm. The methanol was found to be optimum at concentration equal to 18 g.l^{-^1}. In this condition, the biomass yield coefficient was 0.52 g/g methanol, biomass dry weight was 20-25 g/l and the crude protein content was about 70-78 %. A deep jet fermentor of 1 m$^3$ capacity, with a working volume of 600 liters, was used for SCP production using isolated strains. In this continuous system, dilution rates ranging from 0.15 to 0.2 lit.h^{-1} were used to establish optimal condition for biomass production. Under this condition, 30 kg cell dry weight per day was obtained. These experiments showed that the selected methylotrophic strain has good potential for SCP production from methanol as a substrate.
  • Determination of Reservoir Model from Well Test Data, Using an Artificial Neural Network
    R. Kharrat Page 12
    Nowadays, neural networks have a wide range of usage in different fields of engineering. In the present work, this method is used to determine a reservoir model. Model identification, followed by parameter estimation, is a kind of visual process. Pressure derivative curves showing more features are usually used to determine the reservoir model based on the shape of the curve and no calculation is included. So, it is difficult to convert this kind of visual process to an applicable algorithm for computers. In fact, the model identification is a pattern recognition which is best done by an Artificial Neural Network (ANN). If neural networks were learned successfully, they would be able to categorize different shapes into different groups, due to their visual characterization. So, their use in such a job would seem to be useful. In this work, it is shown how to train, examine and use neural networks to determine a reservoir model. The input of an ANN is fifty points of the normalized pressure derivative type curve. Each ANN is trained, based on a specific model, and the output of the ANN is the probability of occurrence of a fed curve to the related model.
  • Mathematical Modeling of a Cross Flow Conveyor Belt Dryer
    E. Mirzahoseinkashani Page 13
    The drying of solids in a cross flow conveyor belt dryer (continuous operation system), in which particles (thin-layer) move in a wire net conveyor, was theoretically studied. A mathematical modeling that considers the influence of bed porosity and transient terms in the drying process was developed and the changes in bed porosity and product density with the moisture content of seeds have been considered. Also, to have a more accurate model, some changes have been made to the specific surface of the seed. The finite volume method was used to solve, numerically, the governing conservation equations. The results of the moisture content of the material (yellow corn kernel), residence time and conveyor length are presented and analyzed in order to modify the model, according to bed porosity, product density and the specific surface changes of the seed. This model can predict humidity ratio, the temperature of air, moisture content and the temperature of the material throughout the drying process
  • Effect of Permeable Contacts on the Performance of a Gas-Oil Gravity Drainage Mechanism in a Stack of Matrix Blocks
    S. Nejadi Page 14
    In the gas invaded zone of a well fractured carbonate reservoir, gravity drainage mechanism plays the main role in expelling oil from dense, low permeability matrix blocks. Whenever the active mechanism is gravity drainage, reinfiltration and capillary continuity phenomena notably influence the rate and amount of oil recovery from matrix blocks. In the current research, six experiments were performed to study the effects of a permeable contact area (between two blocks located on top of each other) on reinfiltration and capillary continuity. Two of the experiments were performed using single blocks of 30 and 60 cm height, whilst others were stacks of two 30 cm high blocks. Results of the experiments reveal that, by increasing the permeable contact area between blocks, due to capillary continuity and reinfiltration, there will be more communication between them, consequently, both ultimate oil recovery and production rate will improve. It is also noticeable that, if the permeable contact area is approximately greater than 20% of the total block surface area, the stack of blocks behaves analogous to a unique block with a height equal to that of the stack. The outcome of the present work, along with data from other studies, such as the effects of horizontal fracture apertures and fracture dips, can be utilized in order to have a better understanding of block to block effects. By this, the modeling of the gravity drainage mechanism, while injecting gas into fractured carbonate formations, would be improved