فهرست مطالب

جنگل و فرآورده های چوب - سال شصت و نهم شماره 4 (زمستان 1395)

فصلنامه جنگل و فرآورده های چوب
سال شصت و نهم شماره 4 (زمستان 1395)

  • تاریخ انتشار: 1395/12/08
  • تعداد عناوین: 18
|
  • وحید اعتماد، مرتضی مریدی*، کیومرث سفیدی صفحات 647-656
    یکی از راه های شناخت بهتر مراحل پویایی و پاسخ جنگل به آشوب های طبیعی، بررسی ساختار توده های جنگلی در مراحل مختلف تحولی جنگل است. این پژوهش با هدف کمی سازی ساختار توده های آمیخته راش در فاز کاهش پایه ها در پارسل 319 بخش گرازبن از جنگل های کمتردست خورده خیرود نوشهر انجام گرفت.
    سه قطعه نمونه یک هکتاری در این فاز انتخاب و در هر یک از قطعات نمونه، مشخصات ساختاری توده اندازه گیری شد. ویژگی های کمی دو درخت راش در نزدیک ترین فاصله به محل تقاطع شبکه (30×30 متر) به عنوان درختان شاهد، به همراه سه درخت همسایه که در نزدیک ترین فاصله از آن واقع شده بودند برداشت شد. فاصله و زاویه بین درخت شاهد و درختان همسایه، و همچنین فاصله درختان همسایه از یکدیگر محاسبه شد. مقدار متوسط شاخص زاویه یکنواخت و آمیختگی گونه ای به ترتیب، 53/0 و 51/0 به دست آمد که نشان دهنده چیدمان مکانی تصادفی گونه راش، تمایل متوسط گونه راش به قرار گرفتن در کنار دیگر گونه ها و رقابت بین گونه ای راش و ممرز در این فاز است. مقدار متوسط شاخص فاصله تا همسایگی 7/4 متر محاسبه شد و شاخص تمایز قطری و تمایز ارتفاعی نیز به ترتیب، 44/0 و 57/0 به دست آمد که نشان دهنده تراکم زیاد توده در این فاز و در نتیجه رقابت شدید بین درختان به منظور کسب منابع و شرایط رشدی بهتر است. با استفاده از اطلاعات حاصل از کمی سازی ساختاری توده های دست نخورده، می توان در نحوه نشانه گذاری های توده های جنگلی براساس الگوی طبیعت به شکل علمی و نه تنها براساس تجربه شخصی عمل کرد.
    کلیدواژگان: راش، ساختار توده، شاخص آمیختگی، فاز کاهش پایه ها، کمی سازی
  • الهه علی بابایی عمران، مهدی قربانی*، محمدرضا مروی مهاجر، محمد عواطفی همت صفحات 657-665
    مدیریت جنگل ها به عنوان یکی از منابع مهم تولید، بسیار لازم و حیاتی است. در تصدی گری منابع جنگلی به عنوان یکی از ارزشمندترین منبع طبیعی جهان، دخیل کردن بهره برداران محلی از این منبع، برای مدیریت مشارکتی جنگل ها از ضروریاتی است که در برنامه عمل مدیریت این عرصه های طبیعی باید به آن توجه شود. بنابراین تحقیق حاضر با هدف دستیابی به یک برنامه صحیح مدیریتی در جنگل ها برپایه ارزیابی مشارکت های مردمی در برنامه های مدیریتی صورت گرفت. برای رسیدن به این منظور، پایش اجتماعی در قالب روابط بین ذ ی نفعان محلی انجام پذیرفت و در نهایت از روش تحلیل شبکه اجتماعی استفاده شد که ابزاری کارامد برای ارزیابی این روابط است. در این تحقیق براساس پیوندهای اعتماد و مشارکت در شبکه بهره برداران محلی، شاخص های کمی و ریاضی تحلیل شبکه ای در بین کلیه بهره برداران سامان عرفی کلاک در منطقه کجور استان مازندران بررسی شده است. نتایج نشان می دهد که میزان انسجام و سرمایه اجتماعی در شبکه ذ ی نفعان محلی در این سامان در حد متوسط تا زیاد بوده و پایداری شبکه اجتماعی در حد قوی برآورد شده است. علاوه بر این نتایج نشان دهنده وجود همبستگی در حد متوسط بین پیوندهای اعتماد و مشارکت در بین بهره برداران در منطقه تحقیق است. براساس این نتایج می توان اظهار کرد که با حفظ و تقویت اعتماد، کنترل اجتماعی در گروه های هدف و پایبندی به سنت ها و عرف های محلی در بهره برداری از منابع جنگلی در بین بهره برداران افزایش می یابد.
    کلیدواژگان: پایش اجتماعی، سرمایه اجتماعی، تحلیل شبکه اجتماعی، روستای کدیر، شبکه بهره برداران محلی، مدیریت مشارکتی
  • رویا عابدی *، سید امیر اسلام بنیاد، اسدالله شاه بهرامی صفحات 667-677
    برآوردهای کمی و دقیق از مشخصه های توده های جنگلی لازمه مدیریت صحیح آنها است. تصاویر سنجش از دور با توجه به اطلاعات مکانی دقیق و وسیع، همواره ابزاری مقرون به صرفه در مدیریت جنگل است و یکی از متداول ترین کاربردهای تصاویر در علم جنگلداری، طبقه بندی مشخصه های توده های جنگلی و تهیه نقشه های موضوعی آنها است. هدف این پژوهش بهینه سازی طبقه بندی تراکم (تعداد درختان در هکتار) در توده های جنگلی با استفاده از روش ناپارامتریک kNN بود. بررسی در منطقه پیلمبرا، در حوضه آبخیز شفارود در غرب استان گیلان انجام گرفت. نتایج نشان داد که روش kNN با تعداد بهینه نزدیک ترین همسایه ها در نقطه 6=k و معیار فاصله بهینه اقلیدسی، نتایج مناسبی برای تهیه نقشه پهنه بندی مشخصه تراکم (تعداد درختان در هکتار) در جنگل های مورد بررسی دارد. برآورد مشخصه تراکم در این روش، با مقادیر 58/228=RMSE، 9/78=relative RMSE درصد و مقدار همبستگی 50/0=r محاسبه شد. مقدار صحت کل و ضریب کاپای نقشه حاصل از طبقه بندی به ترتیب برابر 19/85 درصد و 56/0 به دست آمد. بنابراین الگوریتم ناپارامتریک kNN می تواند روش به نسبت مناسبی برای برآورد مشخصه تراکم جنگل روی تصویر ماهواره IRS سنجنده P6-LIS III است.
    کلیدواژگان: kNN، جنگل، شفارود، گیلان
  • محبتعلی نادری شهاب، مریم جبلی *، علی اشرف جعفری صفحات 679-688
    ملج HudsonUlmus glabraگونه درختی است که در ایران در جنگل های شمالی رویش دارد و به دلیل دامنه محدود اکولوژیک، استفاده بی رویه از چوب آن و ابتلا به بیماری مرگ نارون در معرض خطر است. به منظور بررسی امکان نگهداری بلندمدت بذر این گونه در شرایط فراسرد (Cryopreservation) و بررسی رشد بذور فراسردی در شرایط آزمایشگاه و گلخانه، بذر این گونه از رویشگاه طبیعی آن در استان گلستان جمع آوری شد. برای تعیین بهترین پیش تیمار به منظور ذخیره سازی بذر در شرایط فراسرد یا برودت 196- درجه سانتی گراد، سه پیش تیمار شامل آبگیری، ویتریفیکاسیون و گلیسرول 30 درصد همراه با شاهد آزمایش شد. بذرهای تیمارشده به مدت یک هفته، یک ماه و یک سال در شرایط فراسرد یا درون نیتروژن مایع نگهداری شدند. بذرها پس از خروج از شرایط فراسرد، در شرایط آزمایشگاه و گلخانه آزمایش شدند و تعدادی از صفات مرتبط با جوانه زنی و استقرار در گلخانه بررسی شد. پیش تیمارهای آبگیری، ویتریفیکاسیون و گلیسرول 30 درصد در حفاظت از بذر ملج در شرایط فراسرد دارای اثرهای متفاوتی بودند و بهترین پیش تیمار، آبگیری بذرها (Desiccation) بود. بنابراین بذر این گونه مهم جنگلی را می توان از عرصه های مختلف جمع آوری و نسبت به نگهداری بلندمدت ژرم پلاسم آن اقدام کرد.
    کلیدواژگان: ملج، Ulmus glabra، نگهداری بذر در فراسرد، گونه جنگلی، گونه در معرض خطر
  • اعظم سادات صالحی*، اسدالله متاجی، وحید اعتماد، رضا بصیری صفحات 689-699
    نقش بارز گونه جنگلی کنار (Ziziphus spina-christi) در حفاظت آب و خاک و مقاومت زیاد آن در برابر گرما و خشکی، لزوم کاربرد این گونه را در جنگلکاری و احیای رویشگاه های کنار و به کارگیری آن در فضای سبز شهری آشکار می کند. هدف این پژوهش، یافتن تیمار مناسب برای افزایش جوانه زنی و سبز شدن بذور کنار و ایجاد شرایط بهینه برای تولید نهال سالم است. بر این اساس، تحقیق حاضر در نهالستان شهرستان مسجدسلیمان، به صورت آزمایش فاکتوریل با سه فاکتور خراش دهی بذر در سه سطح، بستر کاشت در چهار سطح و آبیاری در سه سطح در قالب طرح کاملا تصادفی نامتعادل انجام گرفت. نتایج تجزیه واریانس نشان داد که اثرهای اصلی تمام فاکتورها (بستر کاشت، روش آبیاری و روش خراش دهی) و اثرهای متقابل آنها برای صفت درصد زنده مانی در سطح احتمال 1 درصد معنی دار است. در روش های مختلف خراش دهی، بذرهای قرارگرفته به مدت 48 ساعت در آب و 6 ساعت در اسید با 24/48 و 26/4 درصد به ترتیب دارای بیشترین و کمترین زنده مانی بودند. همچنین برای صفات درصد زنده مانی، طول ساقه، طول ریشه، وزن خشک ساقه و نسبت وزن خشک ساقه به ریشه، خاک نیمه سنگین به ترتیب با میانگین 81/54 درصد، 4/17 سانتی متر، 96/16 سانتی متر، 148/0 گرم و 45/1 بهترین بستر کاشت بودند. نتایج نشان داد بذرهای کشت شده تحت آبیاری هر روزه دارای بیشترین مقادیر درصد زنده مانی (29/48 درصد)، طول ساقه (6/13 سانتی متر)، وزن خشک ساقه (109/0 گرم) و وزن خشک ریشه (93/0 گرم) بودند. با آبیاری هر روزه، رویش نهال ها بیشتر شد و عملکرد گیاه در مقیاس وزن نیز تحت تاثیر قرار گرفت. همچنین ترکیبات تیماری خاک سنگین در آبیاری هرروزه در 48 ساعت خیساندن بذر و خاک سنگین در روش آبیاری هرروزه در 2 ساعت خیساندن بذر در اسید به ترتیب با 60 و 11/1 درصد دارای کمترین درصد زنده مانی بودند و کاهش سنگینی بافت خاک به کاهش درصد زنده مانی بذر کنار منجر شد. ضرایب همبستگی قطر یقه با وزن خشک ریشه (83/0)، طول ساقه با وزن خشک ساقه (85/0) و ریشه (85/0) و وزن خشک ساقه با ریشه (86/0) در سطح 1 درصد مثبت و معنی دار بود. درصد زنده مانی همبستگی و ارتباط معنی داری با صفات رویشی نهال نداشت و نتایج نشان داد قوه نامیه و وزن هزاردانه بذر مورد استفاده از شرایط مناسبی برای جوانه زنی و سبز شدن برخوردار بود. همچنین روش های مختلف خراش دهی با نرم کردن پوسته های سخت بذری جوانه زنی آسان تر و افزایش جوانه زنی را در پی داشت.
    کلیدواژگان: آبیاری، بذر کنار، جوانه زنی، خراش دهی، زنده مانی، نهالستان
  • حمید صوفی مریو*، ساسان بابایی کفاکی، وحید اعتماد، ناصر احمدی ثانی صفحات 701-711
    هدف پژوهش حاضر، شناسایی مناطق مناسب گردشگری در جنگل آموزشی پژوهشی دانشگاه تهران (خیرود) واقع در استان مازندران است. فرایند ارزیابی مناطق مناسب گردشگری براساس سه گروه معیارهای اکولوژیکی، زیر ساختی و اقتصادی- اجتماعی صورت گرفت. سپس شاخص های هر کدام از گروه معیارها تعیین شد. نقشه شاخص های شیب، ارتفاع، جهت، دما، بافت خاک، منابع آب، چشم انداز، حیات وحش، تاج پوشش و تیپ جنگلی، سراها، طرح جنگلداری و جاده در محیط سامانه اطلاعات جغرافیایی با طبقات مربوط تهیه شد. در ادامه با استفاده از فرایند تحلیل سلسله مراتبی و بر مبنای نظر کارشناسان، شاخص ها وزن دهی شدند. در نهایت با استفاده از روش کمی ترکیب خطی- وزنی، لایه های وزن دار شاخص ها در محیط سامانه اطلاعات جغرافیایی تلفیق شدند و نقشه نهایی قابلیت گردشگری به دست آمد. براساس نتایج حاصله، بیشترین وزن ها به ترتیب به شیب و منابع آب و کمترین وزن ها به خاک و سرا اختصاص یافت. همچنین نتایج ارزیابی نشان داد که 17/. درصد از منطقه تناسب زیاد، 15/38 درصد تناسب متوسط و 68/61 درصد تناسب کم برای گردشگری دارد. با توجه به شاخص های اکولوژیکی و توسعه معیارهای زیر ساختی و اقتصادی - اجتماعی، امکان توسعه گردشگری در سطح وسیعی برای جنگل خیرود وجود دارد.
    کلیدواژگان: ارزیابی، تحلیل سلسله مراتبی، ترکیب خطی وزنی، توسعه، خیرود، سامانه اطلاعات جغرافیایی، گردشگری
  • فرهاد اسدی *، حسین میرزایی ندوشن، جمشید مختاری صفحات 713-723
    مقدار تجدید حیات و توان رویشی درختان سفیدپلت در شمال ایران به دلیل تخریب رویشگاه های طبیعی و کاهش سطح تنوع ژنتیکی بسیار محدود شده است. از طرفی تولید مثل جنسی در این گونه می تواند سبب تولید ژنوتیپ های برتر شود. از این رو با تولید انبوه نهال بذری، وضعیت توان رویشی آنها با درختان مادری مقایسه شد. به منظور مقایسه توان رویشی والدین و نتاج، از 3 نهال بذری منتخب هر یک از 17 درخت مادری، به همراه قلمه های درختان مادری، 1020 قلمه در قالب یک طرح آزمایشی در 3 تکرار کاشته شده و از نظر صفات رویشی در دوره های زمانی مختلف ارزیابی شدند. از نظر مقدار رویش در دوره های زمانی مختلف، بین نتاج حاصل از درختان والدینی، اثرهای متقابل نتاج در زمان و نتاج در درخت مادری تفاوت معنی دار مشاهده شد. نهال های مازندران 5، گیلان 3 و 4، به همراه گلستان 3 در گروه منتخب، و نهال های مازندران 4، و گلستان 5 و 6 در پایین ترین گروه قرار گرفتند. ماه های تیر، مرداد و شهریور از نظر رویش ارتفاعی در گروه اول قرار گرفتند. میزان رویش نتاج از درخت مادری به صورت معنی داری بیشتر بود، به طوری که میانگین ارتفاع نتاج 1/285 سانتی متر و میانگین ارتفاع درخت مادری 4/250 سانتی متر، همچنین میانگین قطر نتاج 9/20 میلی متر و میانگین قطر درخت مادری 2/18 میلی متر بود. به عنوان یک نتیجه مهم این تحقیق، می توان از نهال های بذری تولیدشده به دلیل برتری نسبت به والدین، برای جنگل کاری در جنگل های مخروبه شمال کشور استفاده کرد.
    کلیدواژگان: تکثیر، جنسی، رویش، ارتفاع، سفید، پلت
  • حسین پیری صحراگرد، محمدعلی زارع چاهوکی*، مجید آجورلو، محمد نهتانی صفحات 725-734
    پژوهش حاضر با هدف مقایسه کارایی روش های رگرسیون لجستیک، آنتروپی حداکثر و پرسپترون چندلایه در ارائه مدل پیش بینی پراکنش رویشگاه گونه بادامک (Amygdalus scoparia) در مراتع استان قم انجام گرفت. برای این منظور، بعد از شناسایی رویشگاه های خالص این گونه، نمونه برداری از پوشش گیاهی به روش تصادفی- منظم انجام گرفت. برای نمونه برداری از خاک رویشگاه، هشت پروفیل حفر و از دو عمق 30-0 و 60-30 سانتی متری نمونه برداری شد. بعد از اندازه گیری خصوصیات خاک و تهیه لایه های مربوط به خصوصیات فیزیوگرافی (شیب، جهت، ارتفاع)، زمین شناسی و خصوصیات فیزیکی و شیمیایی خاک، مدلسازی پیش بینی پراکنش انجام گرفت و نقشه پیش بینی رویشگاه گونه مورد مطالعه تهیه شد. در مرحله بعد، میزان تطابق نقشه پیش بینی حاصل و نقشه واقعی رویشگاه بررسی شد. براساس مقادیر ضریب کاپای محاسبه شده، مدل رگرسیون لجستیک توانسته است پراکنش رویشگاه گونه مورد مطالعه را در سطح عالی (ضریب کاپای 91/0) پیش بینی کند؛ این در حالی است که نقشه پیش بینی حاصل از روش پرسپترون چندلایه و آنتروپی حداکثر دارای تطابق خیلی خوب (به ترتیب ضریب کاپای 85/0 و 8/0) با نقشه واقعی بود. این نتایج نشان می دهد که روش رگرسیون لجستیک در برآورد دامنه پراکنش رویشگاه این گونه در مقایسه با دو روش دیگر، از دقت بیشتری برخوردار است. براساس مدل رگرسیون لجستیک، نوع سازند زمین شناسی (سازند آذرین) و مقدار سنگریزه عمق اول خاک، موثرترین عوامل در حضور این گونه در رویشگاه مورد مطالعه اند. این نتایج گویای آن است که در انتخاب روش بهینه مدلسازی، علاوه بر قابلیت های هر روش، باید به دامنه آشیان بوم شناختی گونه های مورد مطالعه نیز توجه ویژه شود.
    کلیدواژگان: بادامک، پیش بینی پراکنش، پرسپترون چند لایه، رگرسیون لوجستیک، روش یادگیری ماشینی، مراتع استان قl
  • ناصر احمدی ثانی *، ساسان بابایی کفاکی، اسدالله متاجی، لیدا رزاق نیا صفحات 735-745
    تخریب جنگل های زاگرس از گذشته های دور تاکنون، ناشی از بهره برداری های سنتی و اغلب نادرست جنگل نشینان به دلیل فقر، بیکاری و امرار معاش، امری متداول است. در این تحقیق برای کاهش تخریب و پایداری جنگل، امکان استفاده چندمنظوره از مناطق جنگلی زاگرس با کاربرد سیستم اطلاعات جغرافیایی، سنجش از دور و تحلیل سلسله مراتبی در 9178 هکتار از جنگل های شهرستان بانه بررسی شد. همه کاربری های ممکن و معیارها و زیرمعیارهای تاثیرگذار بر هر کاربری براساس مرور منابع و نظر کارشناسان انتخاب شد. نقشه زیرمعیارها با کاربرد نقشه ها و داده های موجود، برداشت های زمینی و تصاویر IRS-P6 تهیه شد. وزن معیارها و زیرمعیارها با کاربرد روش تحلیل سلسله مراتبی تعیین شد. نقشه شاخص ها با طبقه بندی نقشه زیرمعیارها براساس نظر متخصصان تهیه شد. نقشه اولویت هر کاربری با کاربرد روش ترکیب خطی- وزنی با استفاده از سیستم اطلاعات جغرافیایی تولید شد. نقشه اولویت نهایی از طریق روی هم گذاری نقشه های اولویت هر نه کاربری حاصل شد. سرانجام نقشه تناسب اکولوژیک با ویرایش نقشه اولویت نهایی تهیه شد. نتایج نشان می دهد که سطح عمده کاربری های فعلی با توان اکولوژیک تطابق ندارد، اما از نظر اکولوژیک کاربری های مختلف می تواند به صورت مجزا یا همراه با هم در منطقه وجود داشته باشد که سبب کاهش وابستگی جنگل نشینان به درختان جنگلی، کاهش تخریب و در نتیجه پایداری جنگل می شود.
    کلیدواژگان: استفاده چند منظوره، تحلیل سلسله مراتبی، تصویر ماهواره ای، توان اکولوژیک، جنگل های زاگرس
  • مجید پاتو *، علی صالحی، قوام الدین زاهدی امیری، عباس بانج شفیعی صفحات 747-756
    تحقیق حاضر با هدف برآورد مقادیر وزنی ذخیره کربن و ارتباط آن با سایر ویژگی های فیزیکی و شیمیایی خاک درچهار کاربری (بکر، حفاظتی، بهره برداری و باغی) در منطقه زاگرس شمالی در استان آذربایجان غربی انجام گرفت. در هر کاربری در داخل واحدهای همسان 30 قطعه نمونه مشخص شد و در هر یک از آنها نمونه برداری از خاک انجام گرفت و سپس مهم ترین خصوصیات خاک شامل کربن آلی، جرم مخصوص ظاهری، بافت، رطوبت اشباع، درصد تخلخل، اسیدیته، هدایت الکتریکی، ازت کل، آهک، فسفر قابل جذب و پتاسیم محلول در آزمایشگاه تعیین شد. نتایج نشان داد کربن ذخیره شده در دو عمق 15-0 و 50-15 سانتی متر به ترتیب در کاربری بکر 96 /90 و 92/128 تن در هکتار، در کاربری حفاظتی 85/82 و 99 /173 تن در هکتار، در کاربری بهره برداری 26/78 و 26/119 تن در هکتار و در کاربری باغی 75/34 و 95/58 تن در هکتار است. همچنین نتایج نشان داد که بین مقادیر آهک، شن، سیلت، درصد تخلخل، جرم مخصوص ظاهری، رطوبت اشباع، پتاسیم، فسفر، هدایت الکتریکی، کربن آلی و C/N، در کاربری های مورد مطالعه و در عمق های اندازه گیری شده با مقدار ذخیره کربن همبستگی وجود دارد و براساس مدل های به دست آمده در کاربری های مختلف درصد کربن آلی، جرم مخصوص ظاهری و درصد تخلخل بیشترین تاثیر را در مقدار ذخیره کربن داشته اند.
    کلیدواژگان: ترسیب کربن، خاک جنگل، زاگرس شمالی، کاربری زمین
  • احمد علیجانپور*، سالار تارم، جواد اسحاقی راد صفحات 757-766
    جنس زالزالک به عنوان یک گونه چوبی چند منظوره در جنگل های زاگرس شمالی واقع در جنوب استان آذربایجان غربی، از نظر تولید میوه برای ساکنان محلی بسیار پر اهمیت است. هدف این پژوهش، تعیین خصوصیات کمی، ویژگی های فیزیوگرافی و خاک توده های زالزالک زرد است. در بررسی حاضر هشت رویشگاه زالزالک در استان آذربایجان غربی انتخاب و در هر رویشگاه 5-3 قطعه نمونه دایره ای به مساحت 10 آر و در مجموع 33 قطعه نمونه به روش تصادفی سیستماتیک پیاده شد. در داخل قطعات نمونه، مشخصات عمومی قطعه نمونه و ویژگی های درخت شناسی شامل قطر برابرسینه، مبدا پایه ها و قطر بزرگ و کوچک تاج اندازه گیری شد. همچنین ده نمونه خاک از رویشگاه های بررسی شده برداشت شد. نتایج نشان داد اسیدیته، کربن آلی، نیتروژن کل و رس خاک مهم ترین عوامل موثر بر پراکنش رویشگاه های زالزالک هستند. همچنین با جنوبی شدن جهت دامنه، افزایش اسیدیته و رس خاک، گونه هایی مانند زالزالک زرد و گلابی به تعداد کم پراکنش دارند. با بهبود وضعیت حاصلخیزی خاک، افزایش نیتروژن کل و کربن آلی و شمالی شدن جهت دامنه، حضور دیگر گونه های زالزالک به همراه گونه هایی مانند سیب، بلوط، بید، زبان گنجشک و نارون دیده می شود. همچنین بیشترین و کمترین میانگین قطر برابر سینه پایه های گونه های زالزالک به ترتیب 42/17 سانتی متر در رویشگاه قلاتیان و 61/6 سانتی متر در دره شهدا و بیشترین و کمترین میانگین سطح تاج به ترتیب 3/24 متر مربع در رویشگاه میرآباد 2 و 49/4 متر مربع در رویشگاه دره شهدا مشاهده شد. پیشنهاد می شود کاشت گونه زالزالک زرد در جهت های جنوبی و غربی و در مناطقی با حاصلخیزی کم خاک و کاشت دیگر گونه های این جنس در جهت های شمالی با حاصلخیزی خاک بالاتر صورت گیرد.
    کلیدواژگان: توده، جنگل های زاگرس، رویشگاه، زالزالک زرد (L، Crataegus azaralus)، سطح تاج
  • مسعود قربانی، جمشید مختاری، سید احسان ساداتی، هرمز سهرابی* صفحات 767-776
    پژوهش حاضر با هدف بررسی اثر آمیختگی در جنگل کاری های خالص و آمیخته با گونه های صنوبر دلتوئیدس (Populus deltoids) و توسکای ییلاقی (Alnus subcordata) بر مشخصه های کمی توده و خواص خاک منطقه چمستان انجام گرفت. آزمایش در قالب طرح آزمایشی بلوک های کامل تصادفی با پنج تیمار آمیختگی شامل 1. صنوبر خالص (100 درصد)، 2. صنوبر 67 درصد: توسکا 33 درصد، 3. صنوبر 50 درصد: توسکا 50 درصد، 4. صنوبر 33 درصد: توسکا 67 درصد، و 5. توسکای خالص (100 درصد) در چهار تکرار در سال 1374 در ایستگاه تحقیقات چمستان مازندران اجرا شد. در سال 1393 ویژگی های رویشی آماربرداری شد و نمونه های خاک به صورت مرکب از عمق 0 تا 20 سانتی متر برداشت شد. نتایج تحلیل واریانس یک طرفه نشان داد پس از گذشت 20 سال از جنگل کاری، اختلاف درختان از نظر قطر برابرسینه، ارتفاع، عرض تاج و شاخص سطح برگ و توده ها از نظر سطح مقطع، حجم و سطح برگ در هکتار در تیمارهای مختلف معنی دار است. بیشترین رویش قطری صنوبر در تیمار صنوبر 33 درصد: توسکا 67 درصد با میانگین 0/35 سانتی متر مشاهده شد. توسکا نیز بیشترین رویش قطری را در تیمار خالص با میانگین 0/25 سانتی متر نشان داد. بین خصوصیات اسیدیته، قابلیت هدایت الکتریکی، جرم مخصوص ظاهری، ماده آلی، کربن آلی، نیتروژن، فسفر و پتاسیم خاک در تیمارهای مختلف آمیختگی صنوبر و توسکا اختلاف معنی داری مشاهده نشد. بر اساس نتایج، تیمار صنوبر 33 درصد: توسکا 67 درصد مناسب ترین گزینه برای جنگلکاری است.
    کلیدواژگان: توسکا، جنگل کاری، چمستان، خاک، رویش، کاشت آمیخته
  • جلیل کرمی*، محمدرضا کاوسی، منوچهر بابانژاد صفحات 777-788
    ارزیابی تراکم جمعیت و الگوهای مکانی درختان بیمار از معیارهای مهم در انتخاب روش مدیریت و همه گیرشناسی بیماری های درختان جنگلی است. این پژوهش با هدف ارزیابی شدت خسارت و الگوی مکانی- زمانی خشکیدگی بلندمازو در پارک جنگلی قرق در استان گلستان انجام گرفت. وضعیت سلامت درختان بلندمازو در سال های 1392 و 1393 در هفت ترانسکت در قالب روش نقطه مرکزی یک چهارم ارزیابی شد. نتایج نشان داد که توزیع نرخ آلودگی و خشکیدگی درختان بلندمازو در پارک جنگلی قرق غیریکنواخت است، به طوری که در بخش غربی پارک، شدت خسارت و نرخ آلودگی و مرگ ومیر شتاب بیشتری دارد. درختان مرده با شدت به نسبت زیاد در مقیاس های بزرگ (900 متر) تشکیل خوشه می دهند، اما پس از یک سال شدت خوشه ها کمتر می شود و در 200، 400، 600 و 800 متر خوشه های ضعیفی تشکیل می دهند. تجزیه وتحلیل هم رخدادی شدت های مختلف خسارت بیماری با درختان مرده نشان داد که درختان تازه آلوده شده رابطه منفی با درختان مرده دارند و در فاصله دورتری از این درختان حضور می یابند؛ ولی درختان دچار خسارت شدید، رابطه ای قوی با درختان مرده دارند. براساس نتایج این تحقیق می توان الگوی مناسبی برای طرح ریزی برنامه های کاربردی حفاظت و حمایت از جنگل های آلوده و پایش گسترش خشکیدگی بلوط به دست آورد.
    کلیدواژگان: الگوی مکانی-زمانی، خشکیدگی بلوط، پارک جنگلی قرق، همه گیرشناسی
  • حسین رنگ آور*، منوچهر عباسی صفحات 789-798
    هدف این تحقیق، بررسی ظرفیت لنگرخمشی و تحمل تنش (گوشه داخلی و بیرونی) در اتصالات بیسکویتی Lشکل ساخته شده از چوب ماسیو، تخته خرده چوب و تخته فیبر با دانسیته متوسط (MDF) بود. بدین منظور اتصالاتی L شکل با استفاده از چوب راش، صنوبر، تخته خرده چوب و MDF با بیسکویت اندازه صفر (8/3×15×47 میلی متر)، 10 (8/3×19×53 میلی متر) و 20 (8/3×23×60 میلی متر) ساخته شد. لنگر خمشی و تنش در گوشه داخلی و بیرونی اتصالات ساخته شده با همدیگر مقایسه شدند. نتایج نشان دادند که با افزایش اندازه شماره بیسکویت از صفر تا 20 (افزایش طول و عرض بیسکویت)، لنگر خمشی و ظرفیت تحمل تنش اتصالات ساخته شده افزایش می یابد و کمترین مقدار این صفات در اندازه بیسکویت شماره صفر مشاهده شد. همچنین نتایج بررسی جنس اعضای اتصال نشان داده اند که بیشترین ظرفیت تحمل تنش در اتصالات ساخته شده از گونه راش بود که به ترتیب بیشتر از اتصالات ساخته شده از چوب صنوبر، MDF و تخته خرده چوب بود.
    کلیدواژگان: ااتصال بیسکویتی، چوب ماسیو، ظرفیت تحمل تنش، ظرقیت لنگر خمشی، فراورده های مرکب چوبی
  • رضا قمری، اصغر طارمیان* صفحات 799-807
    در این تحقیق، تاثیر شیارزنی زیستی بر نفوذپذیری گازی و ضریب انتشار بخار آب چوب نوئل (Picea abies) در جهت شعاعی با استفاده از قارچ های پوسیدگی سفید (Pysisporinus vitreus) و پوسیدگی نرم (Xylaria longipes) بررسی شد. کشت قارچ ها تحت شرایط دمایی 25 درجه سانتی گراد و رطوبت نسبی 85 درصد در انکوباتور و در مدت زمان های 15، 30 و 45 روز انجام گرفت. نتایج نشان داد که با افزایش زمان کشت در هر دو قارچ، ضریب نفوذپذیری گازی و ضریب انتشار بخار آب و مقدار کاهش جرم افزایش یافت، درحالی که مقاومت فشار موازی الیاف کاهش پیدا کرد. بیشترین کاهش جرم در تیمارهای 30 و 45 روزه قارچ Pysisporinus vitreusمشاهده شد. از علل افزایش نفوذپذیری و انتشار بخار آب می توان به تخریب انتخابی منافذ هاله دار دیواره تراکئیدها توسط قارچ Pysisporinus vitreusو ایجاد سوراخ های متعدد روی دیواره تراکئیدها توسط قارچXylaria longipesاشاره کرد. نتایج این تحقیق نشان داد که تیمارهای 30 روزه هر دو قارچ به علت نداشتن اختلاف معنی دار با تیمارهای 45 روزه بهترین زمان برای شیارزنی زیستی چوب نوئل است.
    کلیدواژگان: شیارزنی زیستی، نفوذپذیری، ضریب انتشار، Pysisporinus vitreus، Xylaria longipes
  • مهسا نصری نوبندگانی، لعیا جمالی راد*، فرشید فرجی، حسین یوسفی صفحات 809-819
    در این تحقیق از هیبرید فنل فرمالدهید- چسب ماهی با هدف جایگزینی ترکیبات زیستی با رزین های شیمیایی برای ساخت تخته لایه استفاده و سپس خواص فیزیکی و مکانیکی تخته لایه های ساخته شده بررسی شد. بدین منظور از چسب ماهی در سه سطح صفر، 10 و20 درصد برمبنای وزن خشک رزین استفاده شد. خواص فیزیکی و مکانیکی نمونه های آزمون شامل واکشیدگی ضخامت بعد از 2 و 24 ساعت غوطه وری در آب، مقاومت خمشی و مدول الاستیسیته موازی و عمود بر الیاف لایه سطحی و مقاومت برشی اندازه گیری شد. براساس نتایج، افزایش مصرف چسب ماهی، سبب بهبود پایداری ابعادی و کاهش چشمگیر واکشیدگی ضخامت بعد از 2 و 24 ساعت غوطه وری در آب شد. از سوی دیگر با افزایش مصرف چسب ماهی تا 20 درصد، مقاومت خمشی و مدول الاستیسیته موازی و عمود بر الیاف لایه سطحی و مقاومت برشی افزایش یافت.
    کلیدواژگان: تخته لایه، فنل فرمالدهید، چسب ماهی، مقاومت خمشی، مقاومت برشی
  • حسین کرمانیان، مهدی رحمانی نیا *، امید رمضانی، مریم عبدی، نرجس خاتون مداحی صفحات 821-830
    روزنامه باطله، به عنوان یکی از انواع مهم کاغذ باطله، به طور معمول از کاغذهای شیمیایی- مکانیکی (CMP) ساخته می شود. هرچند تاکنون تاثیر افزایش عمر (کهنگی) انواع کاغذها بر ویژگی های مختلف خمیرکاغذهای حاصل از بازیافت آنها مورد توجه بوده، اما تاکنون پژوهش های اندکی درباره تاثیر پدیده کهنگی بر بازیافت روزنامه های باطله انجام گرفته است. در این تحقیق کاغذ روزنامه CMPپهن برگان با چاپ افست، در دو سطح دمایی 50 و 100 درجه سانتی گراد و دو سطح زمانی 24 و 48 ساعت تحت کهنگی تسریع شده حرارتی قرار گرفت. نتایج نشان داد کهنگی ایجادشده با اعمال 100 درجه سانتی گراد به مدت 24 و 48 ساعت (حدود نیم دهه و بیشتر)، سبب کاهش جدی شاخص های مقاومت به کشش، ترکیدن، پاره شدن و مقاومت به تا خوردن در خمیرکاغذهای بازیافتی می شود. همچنین کهنگی تسریع شده حرارتی در 50 درجه سانتی گراد به مدت 24 و 48 ساعت (معادل حدود شش ماه تا یک سال عمر کهنه شدن)، تاثیر معنی داری بر مقاومت های کلی کاغذ نشان نداد. همچنین کهنگی تسریع شده حرارتی هیچ تاثیری بر درجه روشنی خمیرکاغذ بازیافتی مرکب زدایی شده نشان نداد. به طور کلی می توان نتیجه گرفت که کاغذهای باطله CMP با عمری در حدود یک سال، قابلیت حفظ و حتی ارتقای ویژگی های مکانیکی پس از بازیافت را دارند، اما افزایش کهنگی در این نوع کاغذهای باطله به حدود نیم دهه یا بیشتر تاثیر منفی بر ویژگی های خمیرکاغذ بازیافتی دارد.
    کلیدواژگان: خمیرکاغذ شیمیایی، مکانیکی، درجه روشنی، کاغذ باطله، کهنگی تسریع شده حرارتی، مرکب زدایی، ویژگی های مقاومتی
  • مهدی رحمانی نیا *، خسرو حسینیان، امیر خسروانی صفحات 831-840
    بهبود فرایند تولید و ویژگی های کاغذهای تهیه شده از الیاف بازیافتی از معضلات مهم صنایع کاغذسازی است. در این تحقیق، تاثیر افزودن نانوذرات کایتوزان بر کیفیت فرایند و محصول تولیدی از الیاف بازیافتی چاپ و تحریر بررسی شد. ریزساختار بودن نانوکایتوزان و امکان دسترسی بیشتر به فضاهای بین اجزای سوسپانسیون خمیرکاغذ در کنار احتمال پیونددهی الکتروستاتیکی و هیدروژنی از ویژگی های این نانوذره محسوب می شود. به این منظور ابتدا نانوکایتوزان تهیه شد و ابعاد و شکل نانوذرات به کمک میکروسکوپ نیروی اتمی (AFM) و میکروسکوپ الکترونی گسیل میدانی (FE-SEM) تایید شد. تغییرات طیف مادون قرمز نیز پس از تبدیل کایتوزان به نانوکایتوزان بررسی و کاهش گروه –NH2 کایتوزان و ایجاد گروه های –CONH بر اثر وقوع واکنش بسپار شدن بین کایتوزان و متااکریلیک اسید تایید شد. سپس نانوکایتوزان در چهار سطح (5/0، 1، 5/1 و 2 درصد براساس وزن خشک خمیرکاغذ) استفاده شد. نتایج بیانگر قابلیت نانوکایتوزان در افزایش ویژگی های مقاومتی (شاخص های مقاومت به کشش، ترکیدن و پاره شدن) و همچنین ویژگی های فرایند تولید (آبگیری و ماندگاری نرمه و پرکننده در ورقه کاغذ) نسبت به تیمار شاهد (بدون ماده افزودنی) بود. همچنین مقایسه نانوکایتوزان و کایتوزان در سطح مصرف یکسان (1 درصد براساس وزن خشک خمیرکاغذ) نشان دهنده عملکرد یکسان دو پلیمر کاتیونی در ویژگی های مقاومتی و عملکرد بهتر کایتوزان در ویژگی های فرایندی است. همچنین هر دو پلی الکترولیت مزبور در سطح مصرف یکسان (1 درصد براساس وزن خشک خمیرکاغذ) از نشاسته کاتیونی عملکرد بهتری در ویژگی های مقاومتی نشان دادند.
    کلیدواژگان: آبگیری، کاغذ بازیافتی، کایتوزان، ماندگاری، نانوکایتوزان، ویژگی های مقاومتی
|
  • Morteza Moridi * Pages 647-656
    Evaluating the forest stands structure in different development stages is one of the ways for better understanding the forest dynamics and its response to natural disturbances. This study was carried out in the compartment 319, Kheiroud forest in order to quantify the structure properties of mixed beech stands in the stem exclusion phase. For this purpose, three one-hectare sample plots were selected in which stand structure characteristics were measured. The quantitative characteristics of two beech trees closest to grid intersection (30×30 m) as reference trees, were also measured along with three nearest neighbors to reference trees. The distance and angle between reference tree and neighbor ones and also the distance among neighbor trees were calculated. The results indicated that the average value of uniform angle index and species mingling were 0.53 and 0.51, respectively which implies random distribution of trees and tending beech to being mixed with other tree species and inter-species competition of this species with hornbeam. The average value of tree to tree distance was 4.7 m. Meanwhile diameter and height differentiation were 0.44 and 0.57, respectively indicating high density and competition in this phase to access the sources and better growth conditions.
    Keywords: Mingling index, quantification, stand structure, stem exclusion phase
  • Elahe Ali Babaie, Mehdi Ghorbani *, Reza Mohajer, Mohammad Avatefi Pages 657-665
    Forest management as one of the important source of production is crucial and critical. In taking over the forest resources as one of the most important of natural resources in the world, it is essential to consider local stakeholders to implement forest action plan for forest co-management. Therefore, this study aims at achieving to proper management of forests based on evaluating the stakeholder participations in management planning. For this purpose, social monitoring based on the relationship between local stakeholders was done and finally social network analysis was applied as an efficient tool in evaluating the relationships. In this study, quantitative and mathematical indicators of network analysis among all stakeholders in Kalak customary in Kojur region, Mazandaran province were investigated based on the trust and cooperation connections in local stakeholder network. The results showed that social cohesion and social capital in local stakeholder networks in this area are average to high level and sustainability of the network is strong. Furthermore, the result also revealed that there is medium correlation between trust and collaboration links in local stakeholders in the study area. According to the result, it could be concluded that maintenance and improvement of social trust will increase the social control and stakeholders will respect local traditions and rules in exploiting the forest resources.
    Keywords: Social monitoring, Social Capital, Social Network Analysis, Kodir village, local beneficiaries network, co-management
  • Roya Abedi *, Amireslam Bonyad Pages 667-677
    Proper forest management needs quantitative and precise estimates of forest stands characteristics. Remotely sensed imageries, due to accurate and broad spatial information, has become a cost-effective tool in forest management. Classification of forest attributes and generation of thematic maps are among the common applications of remote sensing. The objective of this study was to optimize the density classification (number of trees per hectare) in forest stands using non-parametric KNN method in Pilambara, Shafarood watershed, west of Guilan province. This study showed that KNN method with k=6, as the optimum number of nearest neighbors, and Euclidian distance presented acceptable results with RMSE=228.58 (number of trees per hectare), relative RMSE=78.9% and correlation r=0.50 in mapping the stand densities in the study area. The accuracy rate and kappa coefficient of classified thematic map were 85.19% and 0.56, respectively. It is concluded that the KNN algorithm as a non-parametric method could classify the forest density properly.
    Keywords: forest, Guilan, kNN, Shafarood
  • Maryam Jebeli * Pages 679-688
    Wych elm (Ulmus glabra Hudson) is one of the forest species in Hyrcanian forests of Iran and considered as threatened species due to its narrow ecological range, over-exploitation, as well as Dutch elm disease. In order to evaluate the possibility of cryopreservation of Ulmus glabra seeds for long-term preservation, seeds were collected from natural habitats and three pre-treatment methods including PVS2, Desiccation, and 30% Glycerol were applied before incubating the seeds in liquid nitrogen (-196°C). The treated seeds were incubated in liquid nitrogen (LN) for periods of 0 week (without exposure to LN), 1 week, 1 month, and 1 year. After removing the cryopreserved seeds from LN, seed germination, seed vigor, and other attributes were evaluated under laboratory conditions. Furthermore, seedling establishment was assessed under greenhouse conditions. Desiccation had the best effects on survival rate and other attributes of the cryopreserved seeds. However, PVS2 and 30% Glycerol had negative effect on all the attributes. The seeds of Ulmus glabra are able to tolerate cryogenic conditions and cryopreserved seeds are able to grow into normal plants. Seeds of the species can be collected from different areas and preserved for long periods using desiccation pre-treatment method before incubation in LN.
    Keywords: Ulmus glabra, Wych elm, Seed cryopreservation, Forest species, Endangered species
  • Azam Sadat Salehi * Pages 689-699
    The considerable role of Ziziphus spina christi in preserving water and soil and its resistance to heat and drought, the necessity of planting this species for afforestation and restoration of their habitats and urban green space is obvious. The aim of this study was to determine the best irrigation and seedbed treatments before planting for Ziziphus spina Christi seedling production. This study was done in Masjedsoleiman nursery as factorial experimental design with three treatments i.e. scratching the seeds in three levels, the planting bed in four levels, and irrigation in three levels as unbalanced completely random design. The result of analysis of variance showed that the main effects of all treatments (planting bed, method of irrigation and scratching) and their interaction effects on viability percentage were significant (p
    Keywords: Irrigation, Ziziphus spina Christi seed, germination, Scarafication, survival, Nursery
  • Hamid Sofi *, Sasan Babaei Pages 701-711
    This study aims at identifying the suitable areas for ecotourism using geographic information system (GIS) and analytical hierarchy process (AHP) in experimental and educational Kheyroud forest, Nowshar, Mazandaran province. The evaluation process was conducted based on three groups including ecological, infrastructural, and socio-economic criteria. Then, the indicators of each main groups were determined. The indicator maps of slope, elevation, aspect, temperature, soil, water resources, landscape, wildlife, vegetation cover (density and type), cow-pens, forestry plan and road were generated in geographical information system environment. The Analytical Hierarchy Process was used for weight determination of indicators. Finally, based on the weighted linear combination method, weighted layers of indicators were integrated in GIS environment and ecotourism suitability map was created. According to the results, slope and water resources indicators and soil and cowspens indicators showed the highest and lowest weights, respectively. In addition, the results of evaluation revealed that 0.17, 38.15, and 61.88 percent of the area have high, medium, and low suitability for ecotourism purposes, respectively. According to the ecological indicators and the development of infrastructural and socio-economic criteria, there is an extensive potential for ecotourism development in the Kheyroud forest
    Keywords: AHP, Development, Ecotourism, Evaluation, GIS, Kheyroud, WLC
  • Farhad Asadi *, Hoseiin Mirzaei, Jamshid Mokhtari Pages 713-723
    Degradation of natural habitats and decreasing of genetic diversity of Populus caspica led to vast reduction of its regeneration and growth potential in north of Iran. Hence, the growth potential of mass-produced seedlings was compared with their parents. For this purpose, the ramets of three selected seedlings from 17 parent trees belonging to north of Iran, along with ramets of their parent trees, totally 1020 ramets, were planted as a randomized complete block design with three replicates. During growing season of 2013, height growths of the seedlings were measured for 6 time periods. Results showed significant differences in height growth among the time periods, progenies, parental trees, and their interactions. Seedlings of Mazandaran 5, Gilan 3 & 4 and Golestan 3, revealed the best results. In the other hand, Mazandaran 4, Golestan 5 & 6 revealed the worst results. July and August showed highest height growth. During all of the time periods, progeny height growth was more than that of their parents, so that mean height growth of progenies and parents were 285.1 and 250.4 cm, respectively. In addition, mean diameter of progenies, 20.9 mm, was significantly more than that of their parents with a value of 18.2 mm. As the main result of this research, high performance of seedborn seedlings of P. caspica progenies (due to superiority of sexual reproduced seedlings compared to asexual reproduced ones) can be used for reforestation in degraded forests in northern part of Iran.
    Keywords: Height growth, Populus caspica, Sexual reproduction
  • Mohamadali Zarechahooki * Pages 725-734
    This study aims at comparing the performance of logistic regression, maximum entropy, and multilayer perceptron techniques in preparing the predictive habitat distribution map of Amygdalus scoparia in rangelands of Qom province. For this purpose, vegetation sampling was done using random systematic methods after identifying pure habitats of this species. For soil sampling, eight profiles were excavated and two samples were taken from 0-30 and 30-80 cm depth. After analyzing the soil characteristics in the laboratory and generating the layers of physiographic characteristics (slope, aspect, and elevation), geology and physical and chemical characteristic of soil, predictive habitat distribution modeling was performed. Then the accuracy of generated map was evaluated by kappa. Based on the calculated kappa coefficient, logistic regression model was able to predict the habitat distribution of studied species at the excellent level (kappa= 0.91). Meanwhile, predictive maps derived from maximum entropy and multi-layer perceptron had very good aggrement with actual map (kappa 0.85 and 0.8, respectively). These results indicate that the logistic regression model is more accurate than other methods for predicting the distribution of this species due to specific circumstances. Based on logistic regression model, geological formation (Igneous formations) and soil gravel amount are the most influential factors effecting the the presence of this species in this habitat. These results indicate that in order to select the optimal modeling approach, it should be given special attention to the ecological niche of the species studied in addition to the capabilities of each method.
    Keywords: Amygdalus scoparia, Predictive distribution, Multi, layer perceptron, Logistic regression, Machine learning method, Rangelands of Qom
  • Naser Ahmadi * Pages 735-745
    Degradation of Zagros forests has been continuing since a long time ago because of traditional and often improper exploitations due to poverty, unemployment, and livelihood. In this study, in order to reduce forest degradation and improve sustainability, the feasibility of multipurpose using of Zagros forest was assessed in Baneh forests by using GIS, RS and AHP. All of the possible land-uses as well as criteria and sub-criteria were identified based on expert's judgment and literature reviews. Subcriteria maps was created using available data, field works, and IRS-P6 imageries. The weights of subcriteria were determined using AHP. The priority maps of each land-uses was produced with a weighted linear combination method using GIS. The final priority map was achieved by overlying the individual land-use priority maps. The final ecological capability map was prepared by editing the priority map. The results show the main area of current land-uses does not match with the ecological potential. However, ecologically, various land-uses meaning multiple-use can exist separately or together in the study area leading to reducing people’s dependence on forest trees, degradation and improving the forest sustainability.
    Keywords: Analytical Hierarchy Process, Ecological Capability, Multi, Purpose Use, Remote Sensing, Zagros forests
  • Majid Pato * Pages 747-756
    The present study aimed at estimating the amount of carbon storage and its relationship with other physical and chemical soil properties in four land-use systems including intact, protected, exploited and garden-uses areas in the northern Zagros region in west Azarbaijan Province, Iran. Thirty sample plots were identified and within each plot, soil samples were taken in each land use and each same unit, and some soil properties including organic carbon, bulk density, texture, saturation, percent porosity, pH, electrical conductivity, total nitrogen, lime, phosphorus and potassium solution were analyzed. The carbon storage in 0-15 and 15-50 cm of soil in different land-uses was respectively in intact area, 90.96 and 128.92 tons per hectare, in protected area, 82.85 and 173.99 tons per hectare, in exploited area, 78.26 and 119.26, and in garden-uses area, 34.75 and 58.95 tons per hectare. The results of statistical tests showed that there are significant correlation between the amount of lime, sand, silt, porosity, bulk density, saturation, potassium, phosphorus, conductivity, organic carbon, C/N, and the amount of carbon storage. Based on the modeling, the percentage of organic carbon, bulk density and porosity percentage had the greatest impacts on the amount of carbon storage.
    Keywords: Carbon sequestration, Forest soil, Land-use, Northern Zagros
  • Ahmad Alijanpuor* Pages 757-766
    Crataegus as a woody multipurpose species based on fruit production is very important for local residents in the Northern Zagros forests located at the south of West Azerbaijan province. This study aimed at determining the quantitative characteristics, soil and physiographic properties in the Crataegus spp. stands. In current study, eight Crataegus habitats were selected and 3-5 0.1 ha circular sample plots, totally 33 sample plots, were established in each habitat by random systematic method. General characteristics of sampling plot and dendrological properties including diameter at breast height, origin of trees, large and small diameters of canopy were measured. Ten soil samples were taken within studied habitats. The results showed that pH, organic carbon content, total nitrogen and clay are the most effective soil factors on the distribution of Crataegus species. In addition, results imply that Crataegus azarolus and a few pyrus appear with increasing the soil pH and clay and southfacing slopes. Other Crataegus species associated with such species as Malus, Quercus, Salix, Fraxinus, and ulmus are observed with improving the soil fertility, increasing the organic carbon and total nitrogen and north-facing slopes. The maximum and minimum diameter at breast height of Crataegus species individuals were observed in Galatian site (17.42 cm) and in Darre Shohada (6.61 cm), respectively and also the maximum and minimum of average canopy area were observed in Mirabad 2 (24.3 m2 ) and Darre Shohada site (4.49 m2 ), respectively. It is recommended that Crataegus azarolus would be planted in the western and southern aspects and low soil fertility and other species of this genus would be planted in northern aspects with higher soil fertility.
    Keywords: Zagros forests, Crataegus azaralus, habitat, stand, crown area
  • Hormoz Sohrabi * Pages 767-776
    The aim of the present study is to assess the effect of pure and mixed plantations of Eastern Cottonwood (Populus deltoides) and Alder (Alnus subcordata) on quantitative stand characteristics and soil properties. The experiment was established in 1994 using randomized block design with five treatments (1- P100%, 2- P67%-A33%, 3- P50%-A50%, 4- P33%-A67%, and 5- A100%) and four replicates in Chamestan Forest Research Center, Mazandaran province. All trees were measured and mixed soil samples were taken from 0-20 cm depth in all treatments in 2014. Result of ANOVA showed that after 20 years, there are significant differences in tree attributes including diameter at breast height, height, crown width, and leaf area index as well as stand attributes including basal area, volume and leaf area per hectare. The maximum growths of poplar were recorded in P33%:A67% treatments with an average of 35.0 cm DBH, and the maximum growth of Alder were recorded in 100%A treatment with an average of 25 cm. No significant difference was observed in soil properties between different treatments. Based on the results, P33%:A67% treatment is the best treatment for future plantations.
    Keywords: Alnus subcordata, Plantation, Chamestan, Soil, Growth, Mixed plantation
  • Jalil Karami * Pages 777-788
    Evaluating the population density and spatial pattern of infected trees are one of the important criteria for selecting the management method and epidemiology of forest diseases. This study aimed at assessing the damage intensity and spatial-temporal mortality patterns of oak in Qoroq forest park, Golestan province. the health of oak trees was evaluated in seven transects by using quarter-point method in 2013 and 2014. The results showed that the rate of infection and decline of oak trees in Qoroq forest park has heterogeneous distribution, so in the western part of the park, damage intensity and rate of infection and mortality are higher. Initially the dead trees indicated strong spatial clustering at larger scales (900 m) and after a year, intensity of clustering was less pronounced so that at 200, 400, 600 and 800 m, weak clusters are formed. However the co-occurrence analysis of disease severity damage showed that newly infected trees and dead trees had a negative association and occurred in the clusters away from the dead trees, but the trees with high damage was strongly related to the mortality. The results can be a suitable model for planning conservation applications and protection of infected oak forests and monitoring the oak decline
    Keywords: Spatial-temporal pattern, Oak decline, Epidemiology, Forest Park Qoroq
  • Hossein Rangavar * Pages 789-798
    This study was aimed to investigate the bending moment and stress (inner and outer corners) in Lshaped biscuit joint made of solid wood, particleboard and medium density fiberboard (MDF). For this purpose, L-shaped joints made of Beech and Fir, particleboard and MDF by biscuit size numbers of 0 (47×15×3.8 mm), 10 (53×19×3.8mm) and 20 (60×23×3.8mm). Bending moment and stress carrying capacity of the joints were compared to each other. Results showed that bending moment and stress carrying capacity in inner and outer corners of joints were increased by increasing the biscuit size from 0 to 20 (increasing length and wide of biscuit). The Lowest value of these resistance observed in 0 size biscuit. The Results also showed that joints made with Beech were superior to Fir regarding to the measured properties in MDF and particleboards.
    Keywords: Biscuit joint, Solid wood, Stress Carrying Capacity, Bending moment, Wood based composite
  • Asghar Tarmian * Pages 799-807
    In this research, the bioinsising impact of two wood decay fungi (Pysisporinus vitreus and Xylaria longipes) on radial air permeability and moisture diffusion coefficient of spruce wood (Picea abies) was investigated. Fungal cultivation was performed in an incubator at 25 °C and 85% relative humidity for 15, 30 and 45 days. Results showed that the permeability, moisture diffusion and mass loss were increased by increasing the incubation time about both fungi but compression strength was decreased. Maximum mass loss was observed for 30 and 45 days treatments of Pysisporinus vitreus fungus. The increased air permeability and moisture diffusion are probably due to degradation of bordered pits of tracheid cell walls by Pysisporinus vitreus and formation of several holes on tracheid cell by Xylaria longipes. The results of this research showed that 30 days incubation for both fungi was an optimum and best incubation time for increasing the radial air permeability and moisture diffusion in spruce (Picea abies) wood.
    Keywords: Bioincising, Permeability, Moisture diffusion coefficient, Pysisporinus vitreus, Xylaria longipes
  • Loya Jamalirad * Pages 809-819
    In this study, hybrid of phenol formaldehyde-fish glue was used to replace the chemical resin in plywood manufacturing. For this purpose, fish glue was applied at three levels including 0, 10 and 20 percent based on the dry weight of resin. Physical and mechanical properties of manufactured plywoods were measured. Thickness swelling after 2 and 24 hours immersion in tap water, bending strength, modulus of elasticity and the bonding shear strength of prepared plywoods were measured.The results showed that dimensional stability and thickness swelling upon 2 and 24 hours immersion in water were significantly improved by increasing the fishglue content. On the other hand, by increasing the fish glue content up to 20 percent, bending strength, shear strength and modulus of elasticity (parallel and perpendicular to the grain of top layer) were increased.
    Keywords: Plywood, Phenol formaldehyde, Fish glue, Bending strength, Shear strength
  • Hossein Kermanian, Mehdi Rahmaninia *, Omid Ramezani Pages 821-830
    The old newsprint, as an important grade of waste papers, usually has been produced from chemicalmechanical pulp (CMP). Although the effect of paper aging on different properties of recycled pulp has been investigated from long time ago; but, few studies have been observed about the effect of this phenomenon on recycling of CMP paper. In this study, accelerated aging was applied on Hardwood CMP newspaper by 2 levels of temperature (50 and 100˚c) and 2 levels of time (24 and 48 hours). Results showed that accelerated aging applying 100˚c in 24 and 48 hours (about half of a decade and more) impose an intense reduction tensile strength, burst strength and tear strength indices as well as folding endurance strength of recycled pulp. Also, accelerated aging in 50˚c for 24 and 48 hours (about six months until one year) did not show any special effect on mentioned mechanical properties. Moreover, thermal accelerated aging didn’t have any significant effect on brightness of deinked CMP pulp. In general, it can be concluded that CMP waste papers less than one year old can preserve or even upgrade their mechanical properties after recycling, but aging more than half of a year will have detrimental effect on these properties
    Keywords: chemical mechanical pulp, brightness, waste paper, thermal accelerated aging, deinking, mechanical properties
  • Mehdi Rahmaninia * Pages 831-840
    Improving the processing and the recycled paper properties is one of permanent concern of papermaking. In this research, the effect of nanochitosan addition on the process and product quality made of writing and printing recycled fiber was investigated. Being nano size and so its capability in access to the space between pulp suspension components and also its probable ability to make electrostatic and hydrogen bonds are the characteristics of nanochitosan. For this purpose, the chitosan nanoparticles were prepared and their size and shape was confirmed with AFM and FE-SEM. Also, the change in FTIR spectrum after conversion of chitosan to nanochitosan was considered and omitting the –NH2 in chitosan and creation of –CONH groups in nanochitosan by polymerization between chitosan and meta acrylic acid were confirmed. In next step, nanochitosan in four levels (0, 0.5, 1, 1.5 and 2% based on oven dry pulp) was used. The results indicated that nanochitosan was successful in increasing the mechanical properties (tensile, burst and tear indices) and process properties (drainage and fines retention) comparing the control treatment (no additive). Moreover, the comparing of nanochitosan and chitosan performance in the same consumption level (1% based on oven dry pulp) showed similar effect on mechanical properties but chitosan had better performance in process properties. Also, both of this polyelectrolyte showed better results on mechanical properties comparing the cationic starch at the same consumption level (1% based on oven dry pulp).
    Keywords: Drainage, Recycled paper, Chitosan, Retention, Nanochitosan, Strength properties