فهرست مطالب

جنگل و فرآورده های چوب - سال هفتادم شماره 1 (بهار 1396)

فصلنامه جنگل و فرآورده های چوب
سال هفتادم شماره 1 (بهار 1396)

  • تاریخ انتشار: 1396/03/02
  • تعداد عناوین: 18
|
  • سید یوسف عرفانی فرد*، فرنوش نظیری صفحات 1-9
    درک فرآیندهای نهفته در الگوی مکانی درختان یک هدف مهم در بوم شناسی جنگل است که نخستین گام در شناسایی این الگوهای مکانی، استفاده از آماره های اختصاری مناسب است. این پژوهش با هدف مقایسه چهار آماره اختصاری درجه دوم تک متغییره (تابع های K رایپلی، L، همبستگی جفتی و O-ring) در تحلیل الگوی مکانی درختان کنار (Ziziphus spina-christi) در استان فارس انجام شد. تمام درختان با ارتفاع بیش از یک متر در یک قطعه نمونه 200 × 200 مترمربعی نقشه برداری شدند. دو الگوی نقطه ای دیگر با تراکم مشابه و توزیع مکانی متفاوت از الگوی واقعی نیز ساخته شدند.
    مقایسه با فرایند پوآسون همگن نشان داد که الگوی مشاهده شده درختان فاقد ناهمگنی مکانی بود. نتایج نشان داد که دو تابع K و L به دلیل ماهیت تجمعی شان، کپه ای بودن درختان کنار در مقیاس های مکانی مختلف را چنانچه دو تابع همبستگی جفتی و O-ring نشان دادند، شناسایی نکردند. همچنین دامنه پراکندگی درختان به دست آمده از دو تابع K و L (20 متر) با نتایج دو تابع همبستگی جفتی و O-ring (11 متر) مطابقت نداشت. مقایسه میانگین مربعات خطا نیز نشان داد که آماره O-ring دارای حداقل مقدار خطا در مقایسه با تابع های همبستگی جفتی، L و K در هر سه قطعه نمونه بود. به طور کلی، دو تابع همبستگی جفتی و O-ring از دقت و کارایی بیشتری نسبت به تابع های K و L در تحلیل الگوی درختان کنار در این پژوهش برخوردار بوده اند.
    کلیدواژگان: تابع K رایپلی، آماره O، ring، تابع همبستگی جفتی، کنار، میانگین مربعات خطا
  • سیده مریم طاهرزاده موسویان* صفحات 11-20
    تولید نهال با کیفیت مناسب و افزایش عملکرد برای موفقیت هر جنگلکاری ضروری است. ازآنجا که از عوامل مختلفی برای ارزیابی کیفیت نهال جنگلی استفاده می شود، در این تحقیق از ارزیابی میزان وجود برخی از عناصر غذایی در ارتباط با اندازه نهال استفاده شد. نمونه برداری نهال در دو زمان، یکی در اوایل شهریور و دوم در اسفند از پلات های تصادفی به ابعاد 30 ×30 سانتی متر در بستر خزانه انجام گرفت. پس از درجه بندی نهال ها برمبنای قطر یقه نهال، برای اندازه گیری عناصر غذایی از هر درجه قطری، وزن مشخصی از نمونه های ریشه و برگ پنج نهال جدا از هم آسیاب و پودر شد.
    اندازه گیری نیتروژن به روش کجلدال صورت گرفت و برای اندازه گیری فسفر و پتاسیم در عصاره حاصل از هضم به طریق سوزاندن خشک و استفاده از اسید کلریدریک پس از رساندن نمونه به حجم 50 میلی لیتر، غلظت عناصر به کمک دستگاه فلیم فتومتر مشخص شد. عنصر کلسیم در عصاره حاصل از هضم به روش سوزاندن خشک و استفاده از اسید کلریدریک و به کمک دستگاه جذب اتمی اندازه گیری شد. نتایج نشان داد که تفاوت معنی داری بین غلظت مواد غذایی در برگ نهال های درجه بندی شده در اوایل شهریور و ریشه آنها در اسفند وجود ندارد؛ اما غلظت مواد غذایی در ریشه نهال های بزرگ تر در اوایل شهریور بیشتر از نهال های کوچک تر بود. دلیل آن توانایی بیشتر این نهال ها برای جذب مواد غذایی به منظور رشد بیشتر خود در نهالستان است. مقدار مواد غذایی در نهال های بزرگ تر بیشتر از کوچک ترها بود.
    کلیدواژگان: بلند مازو، ارزیابی کیفیت نهال، مواد غذایی، نهال های درجه بندی شده
  • حامد یوسف زاده*، حورا مومنی، سیدمحسن حسینی صفحات 21-29
    تحقیق حاضر به منظور کسب شواهدی مبنی بر تاثیر مخرب دارواش بر شاخص عدم تقارن و خصوصیات برگ درخت انجیلی در جنگل جلگه ای تمیشان نور انجام پذیرفت. برای این هدف، 20 پایه انجیلی در دو موقعیت داخل و خارج توده، در جنگل تمیشان نور انتخاب شد. صفات مساحت ویژه برگ، روزنه و شاخص عدم تقارن اندازه گیری شد. نتایج نشان داد که مساحت برگ و سطح ویژه برگ در هر دو موقعیت در شاخه درختان سالم بیشترین و در شاخه های سالم و آلوده درختان آلوده کمترین مقدار را نشان داد. خصوصیات روزنه نیز بسته به موقعیت قرارگیری درختان و نوع شاخه (سالم و آلوده) با یکدیگر متفاوت بود. آنالیز واریانس نشان داد که اثر جهت که بیانگر عدم تقارن جهت دار و اثر پایه که بیانگر تغییرات پایه هاست، معنی دار است. بررسی اختلاف اندازه دو نیمه چپ و راست برگ نشان داد این صفت تحت تاثیر معنی دار موقعیت قرارگیری درخت و نیز نوع شاخه است. به طور کلی نتایج این تحقیق نشان داد درختان انجیلی آلوده به دارواش واقع در حاشیه توده بیشترین تغییرات را در ریخت شناسی برگ خود ایجاد کردند. در پایان پیشنهاد می شود با توجه به ارزش تغذیه ای دارواش برای دام، به منظور جلوگیری از خشک شدن درخت میزبان، با مدیریت متمرکز بر درختان با آلودگی بسیار زیاد، اقدام به برداشت و حذف دارواش از روی درخت انجیلی شود.
    کلیدواژگان: انجیلی، شاخص عدم تقارن، تنش، درختان میزبان
  • مرضیه کاظمی، احسان عبدی*، باریس مجنونیان، حامد یوسف زاده صفحات 31-38
    پوشش گیاهی با افزایش چسبندگی خاک، سبب افزایش مقاومت خاک در برابر حرکات توده ای و فرسایش می شود. مهم ترین تاثیر پوشش گیاهی در پایداری، سازوکار مسلح سازی توسط ریشه هاست. میزان مسلح سازی به تراکم و مقاومت کششی سیستم ریشه گیاهان بستگی دارد. هدف این پژوهش، بررسی دو پارامتر مقاومت کششی و تراکم ریشه گونه بلوط ایرانی و مقایسه مقاومت کششی و میزان مسلح سازی این گونه در دو فصل زمستان و تابستان است. برای برآورد نسبت سطح ریشه به خاک و پراکنش ریشه ها در افق های مختلف از روش سیستم بیرون زده ریشه ها در اثر فرسایش استفاده و قطر کلیه ریشه های دیواره اندازه گیری شد. همچنین نمونه های ریشه به طور تصادفی از پنج پایه بلوط جمع آوری و مقاومت کششی آنها با دستگاه اینسترون استاندارد اندازه گیری شد. مقدار کمینه و بیشینه نسبت سطح ریشه به خاک به ترتیب 0002/0 درصد و 93/27 درصد مشاهده شد. دامنه قطری ریشه های آزمایش شده برای آزمایش مقاومت ریشه، 5/5- 1/0 میلی متر، دامنه نیروی کشش 3/411- 3/1 نیوتن و دامنه مقاومت کششی 85/3503 – 93/0 مگاپاسکال بود. بیشترین نسبت سطح ریشه به خاک در عمق 10-0 سانتی متر و کمترین آن در عمق 50 سانتی متری دیده شد. با استفاده از این نتایج، میزان مسلح سازی در دو فصل محاسبه و مشاهده شد که بیشترین میزان مسلح سازی مربوط به فصل خزان و در افق 10 سانتی متر است. کمترین و بیشترین میزان مسلح سازی در فصل رویش به ترتیب 0001/0 و 87/2 کیلوپاسکال و در فصل خزان به ترتیب 0004/0 و 37/3 کیلوپاسکال به دست آمد.
    کلیدواژگان: تاثیر فصل، مقاومت کششی، نیروی کششی، نسبت سطح ریشه
  • هستی پطروسیان*، افشین دانه کار، سهراب اشرفی، جهانگیر فقهی صفحات 39-48
    توده های جنگلی چندل (Rhizophora mucronata) از جمله اجتماعات گیاهی منحصربه فرد مانگرو در کرانه های ساحلی جنوب کشور است که در رویشگاه سیریک به همراه اجتماعات درختان حرا (Avicennia marina) تنها توده آمیخته مانگرو را در کشور پدید آورده است. به رغم حضور دیرینه اجتماعات چندل در میان مانگروهای کشور، تاکنون بررسی های اندکی در مورد شرایط رویشگاهی آن صورت گرفته و این در حالی است که شناخت این شرایط و مقایسه آن با ویژگی های محیطی رویشگاه های مانگرو همجوار، به شناخت عواملی کمک می کند که سبب شده گونه چندل تنها در رویشگاه سیریک حضور داشته باشد. به همین منظور با بررسی تجربیات مشابه در ایران و جهان، 14 شاخص موثر بر پراکنش گونه چندل شناسایی و از هر یک نقشه رستری تهیه شد. پهنه جزرومدی، ویژگی های دمایی، بارش سالانه، نوع اقلیم، شوری آب دریا، اسیدیته خاک، موج، جنس بستر و شیب رویشگاه نمونه ای از شاخص هایی بودند که در فرایند این مطالعه در نظر گرفته شدند. سپس 5 درصد هر یک از نقشه ها در رویشگاه های هدف نمونه برداری شد و همبستگی میان متغیرهای محیطی با استفاده از ضریب همبستگی پیرسون، و نرمال بودن متغیرهای کمی با استفاده از آزمون کولموگروف- اسمیرنوف سنجیده شد. آزمون تی مستقل نیز برای مقایسه شرایط محیطی رویشگاه های یادشده استفاده شد. نتایج نشان داد که تفاوت معنی داری بین نوسان دما، متوسط حداکثر آب گرفتگی در هنگام مد، ارتفاع موج، دامنه شوری آب و اسیدیته خاک در رویشگاه چندل و مانگروهای همجوار وجود دارد.
    کلیدواژگان: جاسک، سیریک، شاخص های محیط زیستی، گونه چندل، میناب
  • علی اصغر واحدی*، اسدالله متاجی، رضا اخوان صفحات 49-60
    پیش بینی دقیق حجم درختان سرپا برحسب متر مکعب مبنای برآورد هر چه دقیق تر مقدار رویش، برداشت مجاز، ترسیب کربن زی توده هوایی درختان و مدیریت بهینه جنگل براساس اصل توسعه پایدار محسوب می شود. از این رو، تحقیق حاضر با استفاده از شبکه عصبی مصنوعی در پی مدلسازی و پیش بینی حجم تجاری با حداکثر قطعیت است. پژوهش موردی جنگل سری 3 گلندرود نور بوده و اطلاعات دریافتی مستخرج از جدول های تجدید حجم اداره کل منابع طبیعی نوشهر شامل قطر، ارتفاع کل و مقادیر حجمی مربوط به 150 اصله درختان قطع شده است. کلیه مقادیر حجمی به ازای کمیت های بیوفیزیکی مذکور به عنوان لایه ورودی به صورت مرحله ای با استفاده از شبکه عصبی پیش خور الگوریتم پس انتشار FFBP مدلسازی شدند. همچنین از دو تابع انتقال نورون غیرخطی Logsig و Tansig استفاده شد، طوری که هر مدل با توپولوژی مختلف شبکه مدنظر برای رسیدن به پاسخ هدف، دقت متفاوتی را نشان داد. نورون های انتقالی برای رسیدن به حداقل خطای آزمون داده ها در هر الگوریتم آموزش، پس از وزن دهی اولیه دارای تعداد چرخش متفاوت بودند. نتایج مدلسازی پس از سعی و آزمون مکرر نشان داد که مدل حاوی قطر و ارتفاع کل با تابع انتقالی Logsig با معماری دو لایه پنهان و 15 نورون دارای حداقل میانگین مربعات خطای آزمون ( MSE)، حداقل میانگین انحراف معیار و حداکثر ضریب تبیین (158/0= AD، 99/0= R2) است که از این رو به عنوان مدل بهینه معرفی می شود.
    کلیدواژگان: تابع انتقال، ترسیب کربن، توده های آمیخته راش، حجم تجاری، شبکه عصبی مصنوعی، نورون
  • احسان کهنه، امیر لکزیان*، علیرضا آستارایی، کاظم خاوازی صفحات 61-70
    توسکای قشلاقی با اکتینومیست فرانکیا همزیست بوده و قادر به تثبیت زیستی نیتروژن و تامین نیاز خود است؛ بنابراین شناسایی جدایه های کارامد فرانکیا با توانایی زیاد تثبیت نیتروژن، برای افزایش رشد و بهبود وضعیت تغذیه ای توسکای قشلاقی ضروری است. بدین منظور 25 گره ریشه ای فرانکیا از ریشه درختان توسکای قشلاقی در نقاط مختلف استان گیلان برداشت شد. سوسپانسیون گره ها در شرایط گلخانه ای به نهال های رشدکرده در شن استریل تلقیح شد. پس از ده هفته گیاهان برداشت شده و خصوصیات رویشی، تغذیه ای و مقدار نیتروژن تثبیت شده در آنها اندازه گیری شد. نتایج نشان داد که بیشتر گره های ریشه ای سبب بهبود خصوصیات رویشی و تغذیه ای نهال ها نسبت به شاهد شده اند. مقدار نیتروژن تثبیت شده در نهال ها از 017/0 تا 337/0 میلی گرم نیتروژن در میلی گرم گره متغیر بود؛ بیشترین مقدار نیتروژن در نهال های تلقیح شده با تیمار Alnus glutinosa6 تثبیت شده است. همبستگی مثبت و معنی داری بین وزن گره، زیست توده گیاه و غلظت عناصر غذایی گیاه وجود داشت که بیانگر اثر مثبت تلقیح میکروبی است. با توجه به نتایج می توان گفت که برای رشد بهتر و کمک به استقرار نهال های توسکا، تلقیح آنها با جدایه یا سویه های مناسب فرانکیا ضرورت دارد. بر این اساس تیمار AG6 اثر بهتری بر رشد گیاهان دارد و می توان برای تکثیر و مطالعات بعدی از آن استفاده کرد.
    کلیدواژگان: توسکا قشلاقی، فرانکیا، گره ریشه ای، نیتروژن تثبیت شده
  • زهرا مشایخی*، غلامعلی شرزه ای، افشین دانه کار، وحید ماجد صفحات 71-81
    هدف از این مطالعه، برآورد هزین فرصت اقتصادی حفاظت از جنگل های مانگرو واقع در جزیره قشم برای جوامع محلی است. مهم ترین کارکردهای استفاده ای جنگل های مانگرو در این منطقه، امکان گردشگری، فعالیت های شیلاتی و سرشاخه چینی محدود است.رویکرد مدلسازی انتخاب برای برآورد هزینه کاهش بهره برداری از جنگل ها توسط مردم محلی تحت سناریوهای فرضی حفاظت استفاده شده است که بابت کاستن از بهره برداری هایشان، مبلغی برای جبران خسارت یا درآمد از دست رفته به آنها پرداخت می شود. داده ها و اطلاعات لازم از خانوارهای ساکن در روستاهای بلافصل جنگل های مانگرو به دست آمد و با کاربرد مدل لاجیت شرطی تحلیل شد. نتایج نشان داد که افراد برای پذیرش ریسک محیط زیستی ناشی از حفاظت، تمایل به دریافت غرامت دارند و امکان گردشگری در جنگل های مانگرو بیشترین ارزش نهایی (235000 ریال در روز) را از دید مردم محلی داراست. همچنین نتایج حاکی از ناهمگنی در ترجیحات افراد است که به متغیرهای درآمد، سن، اندازه خانوار، شغل و سابقه مشارکت در طرح های محیط زیستی نسبت داده می شود.
    کلیدواژگان: مدل سازی انتخاب، تمایل به پذیرش، ارزش نهایی، جنگل های حرا، ارزش های استفاده ای مستقیم
  • جعفر حسین زاده*، حسین سردابی، همایون زرین کاویانی صفحات 83-91
    بسیاری از گونه های مورد استفاده در جنگلکاری، حتی در شرایط سخت امکان ماندگاری و زنده مانی دارند، اما برای موفقیت در توسعه این موضوع، توجه به میزان رشد و بازده اقتصادی آنها اهمیت فراوانی دارد. گونه های مختلف اکالیپتوس منابع مهمی برای تولید چوب، کاغذ، سوخت و اسانس هستند که به طور معمول در جنگلکاری مناطق گرمسیری استفاده می شوند. این تحقیق با هدف بررسی رشد گونه ها و پروونانس های سازگار، تندرشد و صنعتی اکالیپتوس، برای کاشت در اراضی کم بازده مناطق گرم و خشک ایلام انجام گرفته است. برای این منظور، وضعیت رشد رویشی 8 گونه و رقم اکالیپتوس شامل E. camaldulensis(از چهار مبدا)، E. sargentii، E. microtheca،E. melliodoraوE. salignaدر قالب طرح بلوک های کامل تصادفی با سه تکرار در ایستگاه تحقیقاتی محسن آب مهران استان ایلام، در یک دوره پنج ساله بررسی شد. تجزیه و تحلیل اطلاعات با استفاده از روش تجزیه واریانس و آزمون چند دامنه دانکن با به کارگیری نرم افزار SAS انجام گرفت. نتایج حاکی از آن است که بین گونه ها و ارقام به لحاظ رشد شاخص های ارتفاع، قطر تنه و قطر تاج اختلاف معنی دار وجود دارد. گونه E. camaldulensis در این تحقیق نسبت به دیگر گونه ها از برتری رشد شاخص های رویشی برخوردار است. سه رقم این گونه دارای تولید چوب سالانه بین 2 تا 5 متر مکعب در هکتار است و یک رقم آن (رقم شفارود) عملکرد سالانه بیش از 35 متر مکعب در هکتار دارد.
    کلیدواژگان: اکالیپتوس، جنگل کاری، رویش، مهران
  • زهرا احدی، سیدجلیل علوی *، سیدمحسن حسینی صفحات 93-102
    تهیه نقشه متغیرهای کمی جنگل، امری اجتناب ناپذیر در مدیریت و بهره برداری پایدار اکوسیستم جنگلی است. نقشه توان تولید جنگل، پتانسیل رویشگاه را در زمینه مواردی همانند تولید چوب، ترسیب کربن و غیره نشان می دهد و به طور معمول معرف شاخص توان تولید یک گونه خاص است. با توجه به گستردگی سطح جنگل های شمال کشور و کوهستانی بودن عرصه ها، امکان صرف زمان و هزینه زیاد و آماربرداری صددرصد برای تهیه نقشه های دقیق وجود ندارد. ازاین رو یافتن روش مناسب برای تهیه نقشه ویژگی های کمی جنگل ها ضروری است. تحقیق حاضر در زمینه تهیه نقشه توان تولید رویشگاه راش با استفاده از دو روش کریجینگ معمولی و معکوس فاصله وزنی در جنگل دانشگاه تربیت مدرس انجام گرفته است. به منظور جمع آوری اطلاعات لازم، از 123 قطعه نمونه دایره ای با مساحت 1000 متر مربع در توده هایی که در آنها گونه راش غالب بود استفاده شد. نتایج بررسی حاضر نشان می دهد با توجه به معیارهای میانگین خطا (036/0-=OK، 192/0-=IDW)، میانگین قدرمطلق خطا (598/1=OK، 749/1=IDW)، مجذور میانگین مربعات خطا (053/2=OK، 223/2=IDW) و معیارهای نسبی میانگین خطا (104/0=OK، 553/0=IDW) و مجذور میانگین مربعات خطا (906/5=OK، 393/6=IDW)، روش کریجینگ عملکرد بهتری دارد. نتایج پژوهش حاضر نشان می دهد که روش زمین آماری کریجینگ قادر به تبیین تغییرهای مکانی توان تولید در منطقه تحقیق است و می تواند نقشه پهنه بندی آن را با صحت مناسب تولید کند.
    کلیدواژگان: توان تولید، درون یابی، راش، کریجینگ، معکوس فاصله وزنی
  • سمیه سلگی، علی صالحی*، حسن پوربابایی، محمود شعبانپور، سید جلیل علوی صفحات 103-110
    حد رطوبت زراعی (FC) و حد رطوبت نقطه پژمردگی (PWP) در محاسبه مقدار آب قابل دسترس و به طور کلی مقدار آب مورد نیاز گیاه استفاده می شوند. تعیین دقیق این حدود به طور معمول وقتگیر است و امکانات لازم بری این کار نیز در همه آزمایشگاه ها یافت نمی شود. بنابراین با تخمین این حدود از روی برخی ویژگی های فیزیکی و شیمیایی خاک، می توان اطلاعات مفیدی از توانایی نگهداری رطوبت خاک به دست آورد. در این پژوهش نمونه های خاک از منطقه گیسوم در استان گیلان تهیه شد و پس از انتقال به آزمایشگاه، توزیع اندازه ذرات، درصد مواد آلی، اسیدیته، جرم مخصوص ظاهری، جرم مخصوص حقیقی، رطوبت زراعی و رطوبت نقطه پژمردگی اندازه گیری شد. رابطه رطوبت زراعی و رطوبت نقطه پژمردگی با سایر خصوصیات خاک به کمک روش های رگرسیون یک متغیره و چند متغیره بررسی شد. نتایج نشان داد که رطوبت زراعی با درصد ماده آلی و درصد ماسه خاک رابطه قوی و معنی دار دارد (80/0=r و سطح معنی داری 1 و 5 درصد). همچنین رطوبت نقطه پژمردگی با درصد سیلت و درصد ماده آلی، رابطه معنادار داشت (57/0=r و سطح معنی داری 5 درصد). به طور کلی نتایج گویای آن است که برای برآورد رطوبت زراعی و رطوبت نقطه پژمردگی خاک این مناطق، می توان از سایر ویژگی های خاک که اندازه گیری آنها به نسبت ساده تر است استفاده کرد.
    کلیدواژگان: آب قابل استفاده گیاه، رطوبت خاک، روش های رگرسیونی، نقطه پژمردگی
  • رضا اخوان *، تکتم مومنی مقدم، مسلم اکبری نیا، سیدمحسن حسینی صفحات 111-125
    بررسی الگوی مکانی افراد یک گونه در مراحل رویشی مختلف و نیز اثرهای متقابل آنها به منظور درک پویایی مکانی و زمانی جوامع ضروری است. این تحقیق با هدف تعیین الگوی مکانی گونه ارس در مراحل رویشی مختلف و همچنین بررسی رقابت درون گونه ای بین مراحل رویشی مختلف در جنگل های ارس منطقه حفاظت شده هزارمسجد خراسان رضوی انجام گرفت. جمع آوری داده ها با استفاده از چهار قطعه نمونه یک هکتاری به ابعاد 100 100 متر که به صورت تصادفی انتخاب شدند، انجام گرفت. در داخل این قطعه ها، قطر تاج کلیه درختان ارس اندازه گیری و مختصات مکانی آنها به روش فاصله- آزیموت تعیین شد. سپس این درختان براساس اندازه قطر تاج به سه طبقه نهال، جوان و بالغ تقسیم شدند. تجزیه وتحلیل داده ها با استفاده از حالت های تک متغیره و دومتغیره آماره او- رینگ به ترتیب به منظور بررسی الگوی مکانی و اجتماع پذیری پایه های ارس انجام گرفت. نتایج نشان داد که الگوی کلی پراکنش پایه های ارس در بیشتر موارد دست کم تا فاصله 25 متری کپه ای است و پس از آن با بزرگ شدن مقیاس بررسی، به سمت الگوی تصادفی میل می کند. بررسی رقابت درون گونه ای و اثرهای متقابل بین مراحل رویشی مختلف ارس نشان داد که رقابت معنی داری بین آنها وجود ندارد و در بیشتر موارد اثر متقابل از نوع جذب یا در نهایت خنثی است. سنگینی و محدودیت پراکنش میوه ارس، نبود رقابت درون گونه ای و شرایط سخت محیطی رویشگاه از عوامل موثر در شکل دادن الگوی پراکنش اغلب کپه ای ارس است.
    کلیدواژگان: آماره او- رینگ، اثرات متقابل، ارس، الگوی مکانی، جنگل های هزارمسجد خراسان
  • هومن عباسی*، محمدرضا پورمجیدیان، سید محمد حجتی، اصغر فلاح صفحات 127-136
    استفاده از گونه های درختی در گیاه پالایی بسیار ارزشمند است، ولی لازمه آن کسب اطلاع از سازوکار فیزیولوژیک و پتانسیل گونه های مختلف است. بنابراین در این تحقیق توانایی گیاه پالایی دو گونه سوزنی برگ سرو نقره ای و خمره ای در مرحله نهال مورد ارزیابی قرار گرفت. در همین راستا نهال های یک ساله دو گونه مذکور در طول یک فصل رویش در خاک های آلوده به سرب با غلظت های 0، 100، 200، 300، 400 و 500 میلی گرم در کیلوگرم خاک قرار گرفت و شاخص های مختلفی از قبیل تبادلات گازی، پارامترهای فیزیولوژیک و رشد و تولید در دو گونه مورد بررسی قرار گرفت. تجزیه وتحلیل های آماری نشان داد که نرخ فتوسنتز و پارامترهای فیزیولوژیک دو گونه متاثر از اثرات منفی آلودگی سرب قرار گرفت، ولی این ضعف در متابولیسم گیاه سبب مرگ ومیر نهال های هیچ کدام از دو گونه نشد. میزان رشد و تولید زی توده در گونه سرو نقره ای کمتر دستخوش اثرات منفی قرار گرفت که نشان از مقاومت بیشتر این گونه دارد. درنهایت می توان اذعان داشت که دو گونه سرو نقره ای و خمره ای سازوکار متفاوتی نسبت به آلودگی سرب دارند، ولی توانایی و مقاومت گونه سرو نقره ای بیشتر است که بی-شک مطالعات جامع تر بویژه در غلظت های شدیدتر و دوره های طولانی تر برای تایید نهایی این یافته لازم است.
    کلیدواژگان: آلودگی سرب، رشد، سوزنی برگ، فتوسنتز، گونه های چوبی
  • مهران بابایی، یحیی همزه *، مهدی جنوبی، علیرضا عشوری صفحات 137-145
    هدف این پژوهش، بررسی اثر اصلاح شیمیایی نانوفیبرهای سلولزی بر ویژگی های فیزیکی، مکانیکی و تخریب قارچی چندسازه زیستی نشاسته نرم شده (TPS) بود. ازآنجا که این ویژگی ها در شرایط عملیاتی صنایع و مواد بسته بندی اهمیت دارند، ازاین رو چندسازه مورد نظر با استفاده از نشاسته ذرت، گلیسرول/آب به عنوان نرم کننده و نانوفیبر سلولزی اصلاح شده و نانوفیبرسلولزی اصلاح نشده (10 درصد وزنی) به عنوان تقویت کننده ساخته شد. اصلاح شیمیایی استیلاسیون نانوفیبرهای سلولزی با استفاده از انیدرید استیک و پیریدین به عنوان کاتالیزور با موفقیت صورت گرفت. جذب آب، نفوذپذیری به بخار آب و ویژگی های مکانیکی و دینامیکی مکانیکی چندسازه ها بررسی شد. به علاوه، تخریب زیستی قارچی در نانوچندسازه ها بررسی شد. نتایج نشان داد که نانوفیبرهای سلولزی اصلاح نشده و اصلاح شده در بهبود ویژگی های جذب آب و نفوذپذیری نسبت به بخار آب چندسازه نشاسته نرم شده موثر واقع شده اند. همچنین افزودن نانوفیبرهای سلولزی اصلاح نشده و اصلاح شده سبب بهبود ویژگی های مکانیکی چندسازه شد. آنالیز دینامیکی مکانیکی (DMA) نشان داد که مدول ذخیره به طور معنی داری بهبود پیدا کرده است. مطالعات تخریب قارچی هم نشان داد که افزودن نانوفیبرهای سلولزی به ویژه در نانوچندسازه نشاسته نرم شده/نانوفیبر سلولزی، سبب افزایش دوام و مدت زمان تخریب زیستی چندسازه نشاسته نرم شده می شود.
    کلیدواژگان: استیلاسیون، تخریب زیستی، چندسازه زیستی، نانوفیبرسلولزی
  • امیر خسروانی*، امیرحسین مهرانفر، مهدی رحمانی نیا صفحات 147-155
    نشاسته کاتیونی به طور گسترده ای به همراه انواع نانوذرات معدنی مانند نانوسیلیکا در پایانه تر کاغذسازی کاربرد دارد. در این مطالعه تلاش شد تا اثر درجه جایگزینی های نشاسته کاتیونی (018/0 و 045/0) در سیستم نانوذره حاوی نانوسیلیکا در خمیر بازیافتی حاصل از کارتن های کنگره ای کهنه بررسی شود. در ابتدا به منظور بررسی ویژگی های نانوذرات، شکل، اندازه و پراکنش ابعاد ذرات نانوسیلیکاسل مصرفی، با استفاده از میکروسکوپ نیروی اتمی و نیز میکروسکوپ الکترونی عبوری مطالعه شد که میانگین ابعاد نانوذرات کمتر از 50 نانومتر اندازه گیری شد. همچنین، در بررسی شاخص های فرایندی در تولید کاغذ، نتایج نشان از تعامل و اثرگذاری بیشتر نشاسته کاتیونی با درجه جایگزینی زیاد به همراه نانوذرات سیلیکا دارد، به نحوی که با استفاده از نشاسته کاتیونی با درجه جایگزینی 045/0، قابلیت آبگیری از 300 میلی لیتر (CSF) در نمونه شاهد به حدود 560 میلی لیتر (CSF) افزایش یافت. به علاوه، با توجه به اینکه ویژگی پیوند درونی کاغذ، شاخص مناسبی از کارایی نشاسته است، اثر درجه جایگزینی نشاسته کاتیونی در این ویژگی مقاومتی مشهودتر بود. چنانکه با استفاده از نشاسته کاتیونی با درجه جایگزینی زیاد، مقاومت درونی کاغذ نسبت به شاهد به بیش از دوبرابر افزایش یافت. از سوی دیگر، هرچند به طور کلی در فرایند جذب نشاسته کاتیونی، به لحاظ الکتروسینتیکی، معکوس شدن بار عمومی سیستم کاغذسازی به عنوان یک عامل محدودکننده در استفاده از نشاسته کاتیونی با DS زیاد است، اما نتایج نشان داد در تولید کاغذ بازیافتی از کارتن های کنگره ای کهنه، استفاده از نشاسته کاتیونی با DS زیاد موثرتر بوده است.
    کلیدواژگان: درجه جایگزینی، قابلیت آبگیری، ماندگاری، مواد افزودنی کاغذ، نانوسیلیکا، نشاسته کاتیونی
  • صالح قهرمانی، سحاب حجازی *، سعید مهدوی صفحات 157-165
    این تحقیق با هدف توسعه مقاومت های خمیرکاغذ کرافت لاینر با نانوفیبر سلولزی تهیه شده از ساقه برنج انجام گرفت. در این تحقیق، چوب صنوبر دلتوئیدس (P. deltoides) رقم 55-69 به عنوان گونه ای موفق، تندرشد و زودبازده برای تولید خمیرکاغذ انتخاب شد. عوامل متغیر پخت کرافت شامل سولفیدیته، قلیا، درجه حرارت و مدت زمان، هر کدام در سه سطح و نسبت مایع پخت به ماده چوبی 4 به 1 در نظر گرفته شد. پخت بهینه براساس عدد کاپای 2/17 و بازده 94/53 درصد خمیرکاغذ با شرایط زیر شامل سولفیدیته 23 درصد، قلیای فعال 18 درصد، زمان 180 دقیقه و دمای 170 درجه سانتی گراد انتخاب شد. سپس این خمیرکاغذ برای دستیابی به درجه روانی 333 میلی لیتر درجه کانادایی پالایش شد و از آن کاغذهای دست ساز با جرم پایه 60 گرم بر سانتی متر مربع ساخته شد. افزودن نانوفیبر با سوسپانسیون خمیرکاغذ در سه سطح 5، 10 و 15 درصد براساس وزن خشک خمیرکاغذ انجام گرفت و در مدت زمان 5 دقیقه هم زده شد، سپس از خمیرهای تیمارشده، کاغذهای دست ساز با جرم پایه مذکور تهیه شد. نتایج نشان داد که همه مقاومت های کاغذ کرافت با افزایش مصرف نانوفیبرسلولزی افزایش یافت. با افزودن 15 درصد نانوفیبر سلولزی به سوسپانسیون خمیرکاغذ، شاخص کشش 31/26 درصد، شاخص ترکیدن 08/20 درصد، شاخص پارگی 07/10 درصد، مقدار سفتی خمشی 48/24 درصد و مقاومت به لهیدگی حلقوی 38/52 درصد افزایش یافت. نتایج کلی، حاکی از تاثیر مثبت افزودن نانوفیبر سلولزی به خمیرکاغذ کرافت صنوبر دلتوئیدس، در بهبود مقاومت های کاغذ کرافت لاینر است.
    کلیدواژگان: خمیرکاغذ کرافت، صنوبر دلتوئیدس، کرافت لاینر، مقاومت های کاغذ، نانوفیبر سلولزی
  • سعید کاظمی نجفی*، مسعودرضا حبیبی، اسماعیل قاسمی صفحات 167-177
    در این پژوهش، تاثیر روش اختلاط و مقدار نانورس بر ویژگی های فیزیکی، مکانیکی و ریخت شناسی چندسازه چوب پلاستیک بررسی شد. چوب پلاستیک با استفاده از مخلوط پلی اتیلن های بازیافتی (پلی اتیلن سبک و سنگین)، نانورس و آرد چوب ساخته شد. مقدار ماتریس پلیمری 60 درصد (34 درصد پلی اتیلن سبک بازیافتی و 26 درصد پلی اتیلن سنگین بازیافتی) و مقدار ماده لیگنوسلولزی 40 درصد و مقدار نانورس در دو سطح وزنی 0 و 3 درصد (بر اساس وزن چندسازه) استفاده شد. برای ساخت نمونه ها از دو روش اختلاط همزمان و پیش اختلاط مذاب استفاده شد. نتایج نشان داد که ویژگی های فیزیکی و مکانیکی نمونه های ساخته شده به روش پیش اختلاط مذاب نسبت به نمونه های ساخته شده به روش اختلاط همزمان بهتر است. با افزایش درصد نانورس، خواص مقاومتی کاهش و جذب آب افزایش یافت. نتایج همچنین بیانگر کلوخه های نانورس و توزیع نامناسب آن در ماتریس پلیمری بود. در مقایسه با روش اختلاط همزمان، ذرات نانورس در نمونه های ساخته شده با روش پیش اختلاط مذاب، توزیع و پراکنش مناسب تری داشتند.
    کلیدواژگان: پلی اتیلن سبک، پلی اتیلن سنگین، اختلاط همزمان، پیش اختلاط مذاب، چند سازه چوب پلاستیک
  • مرتضی ناظریان*، سجاد اکبری، حسین کرمانیان، مسعود هاشمی صفحات 179-188
    فاکتورهای مختلفی بر روی خواص اوراق مرکب چوبی تاثیر گذار هستند. بررسی تمامی این فاکتورها نتنها اتلاف وقت و انرژی را افزایش می دهد، همچنین دقت در برآورد میزان تاثیر متغیرهای انتخاب شده در ساخت به منظور حصول نقطه بهینه از خواص مختلف فراورده های مرکب چوبی را کاهش می دهد. از اینرو، لازم است تا از متدهای نوین آماری برای تعیین مدل برآورد کننده نقطه بهینه تولید استفاده نمود. هدف این تحقیق، ارزیابی عملکرد شبکه های عصبی مصنوعی در راستای مدلسازی خواص فیزیکی تخته خرده چوب ساخته شده از ساقه کلزا بود. مدلسازی و امکان تخمین خصوصیات فیزیکی تخته خرده چوب با استفاده از نسبت ملامین فرمالدئید به اوره فرمالدئید، نسبت ساقه کلزا به صنوبر و مقدار رطوبت کیک به روش های شبکه های عصبی مصنوعی: MLP، RBF و ANFIS بررسی شد. نتایج نشان داد که شبکه عصبی MLP نسبت به شبکه RBFN و ANFIS عملکرد به نسبت بهتری در زمینه برآورد خصوصیات فیزیکی تخته خرده چوب دارد. همچنین نتایج نشان داد که مدل های هوش مصنوعی در زمینه پیش بینی خصوصیات فیزیکی تخته خرده چوب، دقت و توانایی مناسبی دارند. نتایج آنالیز حساسیت نیز نشان داد که در زمینه برآورد TS2 و WA24 مهم ترین پارامتر با تاثیر مثبت در روند مدلسازی، مقدار رطوبت کیک است و نسبت ملامین فرمالدئید به اوره فرمالدئید نیز در زمینه مدلسازی TS24 و WA2 موثرترین پارامتر است.
    کلیدواژگان: تخته خرده چوب، خواص فیزیکی، شبکه های عصبی مصنوعی، پرسپترون چند لایه
|
  • Yousef Erfanifard*, Farnoush Naziry Pages 1-9
    Understanding the underlying processes in spatial pattern of trees is an important goal in forest ecology. The first step in characterizing these spatial patterns is to use appropriate summary statistics. This study was aimed to compare four univariate second-order summary statistics (Ripley's K-, L-, pair correlation and O-ring functions) in spatial pattern analysis of Christ's thorn jujube trees (Ziziphus spina-christi) in Fars province. All individual trees with height more than 1 m were mapped in a 200 × 200 m2 plot. Two other point patterns were also generated with similar density and different spatial distributions from the true pattern. The observed pattern of trees showed no spatial heterogeneity as compared to homogeneous Poisson process. The results showed that K- and L-functions did not reveal the clustering of Christ's thorn jujube trees in different spatial scales as shown by pair correlation function and O-ring statistic because of their cumulative structure. The range of dispersion resulted from K- and L-functions (20 m) did not conform the results of pair correlation function and O-ring statistic (11 m). Comparison of mean squared error also showed that O-ring function had the least amount compared to pair correlation, L- and K-functions in all three plots. In general, pair correlation function and O-ring statistic were more precise and efficient than K- and L-functions in analyzing the pattern of Christ's thorn jujube trees in this study.
    Keywords: Ripley's K-function, O-ring statistic, Pair correlation function, Christ's thorn jujube, mean squared error
  • Maryam Taherzadeh * Pages 11-20
    The production of good quality seedlings and increased performance are essential to the success of any plantation program. In order to develop a mechanism to evaluate the quality of nursery seedlings prior to planting in the field, production of good quality seedlings in nursery has important role in successful reforestation projects. Seedling sizes and nutrition status are two important factors in good quality seedlings. For these reasons, in this study nutrient concentration and content of nitrogen, phosphorous, calcium and potassium in roots and leaves of graded Oak seedlings (small, medium and large) sampled in two-stage sampling at the end of the first growing season (early September 2010 and late February 2011) were measured. The aim of this study is to know different levels of these nutrients in graded seedlings. The results showed there was not significant difference between nutrients in leaves and roots of graded seedlings in September and February, respectively. But higher seedlings had higher nutrient concentration rather than the smaller ones in February thanks to having more ability for absorption of nutrients .The content of nutrients in big and medium seedlings is more than small-sized ones.
  • Hamed Yousefzadeh*, Hura Momeni, Mohsen Hoseini Pages 21-29
    This study was conducted to investigate the devastating impact of Mistletoe (Viscum album L.) on asymmetry index and leaf characteristics of Ironwood (Parrotia persicaDC.) in Tamishan Forest, Noor, Iran. For this purpose, 20 Ironwood trees were selected inside and outside of the forest. The results showed that the highest and lowest values of leaf area and specific leaf area were observed in healthy and infected trees, respectively, both inside and outside of the forest. Stomatal characteristics of diameter, area and density also varied depending on location of trees and branch types (healthy or infected). Analysis of variance (ANOVA) indicated that the effect of left or right sides of leaves (sides) and trees were significant, while the interaction between side×trees was not significant. The difference between left and right sides of leaves were also significantly affected by location of trees and branches types. Generally, this study showed that the presence of mistletoe influenced the asymmetry index and have been caused to changes in the morphology of the infected trees. Finally, due to nutrition importance of Viscum album for animal to prevent from death of host trees, mechanical removing of Viscum album from host trees with high density is recommended.
    Keywords: Parrotia persica, stress, Host trees, asymmetry index
  • Marziye Kazemi, Ehsan Abdi *, Baris Majnounian, Hamed Yousefzadeh Pages 31-38
    Vegetation enhances the soil resistance against instability and erosion through increasing the soil cohesion. The main effect of vegetation in stability improvement is soil reinforcement by roots. The amount of reinforcement depends on distribution and strength of roots. The aim of this study was to assess the quantity of these two parameters of Persian oak roots and also comparing the tensile strength and reinforcement effect of roots in winter and summer seasons. Damage survey method was used to assess the distribution of roots. The diameters of all roots in trenches were measured by a digital caliper. Some root specimens were randomly selected from five tree samples and their tensile strengths were measured using a standard Instron. The range of root diameter and corresponding force and tensile strength were 0.1-5.5 mm, 1.3-411.3 N and 0.93-1217.39 MPa, respectively. Maximum and minimum root densities were in 0-10 and 50 cm soil horizons. The maximum reinforcement effect was belong to winter and 0-10 cm horizon. Minimum and maximum reinforcement effects for winter season were 0.0001 and 3.37 and 0.0004 and 2.87 MPa for summer.
    Keywords: season effect, Tensile Strength, tensile force, Root Area Ratio
  • Hasti Petrosian *, Afshin Danekar, Sohrab Ashrafi, Jahangir Feghhi Pages 39-48
    Rhizophora mucronata forest stands are among the unique mangrove association in the coastline of southern Iran. These stands along with Avicennia marina constitute the only mixed mangrove forest in Sirik site. Despite the long-standing presence of Rhizophora mucronata among mangrove forests of Iran, few studies have been done about its habitat conditions. Understanding these conditions and their comparison with the environmental characteristics of adjacent habitats, could help to identify the leading factors in presence of Rhizophora mucronata only in Sirik habitat. For this purpose, based on the same experiences in Iran and other countries, 14 effective indices on distribution of R. mucronata were recognize and mapped. Such indices as tidal zone, temperature properties, annual rainfall, climate, seawater salinity, soil acidity, wave, substrate, and slope of habitat are among the indices considered in this study. The prepared maps were exported into GIS software. Then, 5% of each map in Sirik, Jask and Minab habitats was randomly selected for exploring the Pearson correlation coefficient and normality test via Kolmogrov-Smirnov test by using Minitab 16 software. The environmental conditions of the mentioned habitats were compared by using independent t-test. The results showed that there are significant difference between fluctuation of temperature, wave height, average maximum flooding level, water salinity and pH of soil in Sirik habitat (with R.mucronata species) and Jask and Minab (without R. mucronata species).
    Keywords: Environmental indices, Jask, Sirik, Rhizophora mucronata species, Minab
  • Ali Vahedi *, Asad Mataji, Reza Akhavan Pages 49-60
    Predicting the volume of standing trees precisely is the basis of growth rate, amount of allowable harvesting, aboveground biomass carbon sequestration, and the foundation of optimal management according to the sustainable development. New technology of artificial intelligence including artificial neural network (ANN) was applied for modelling and predicting the commercial volume of measured trees in district 3 of Glandroud forests. The data of renewed volume table was acquired from bureau of natural resources and watershed management of Mazandaran province, Nowshahr. Diameter and total height of 150 fallen trees were used as inputs to develop the stage-wise modeling by feed forward back-propagation (FFBP). Two non-linear functions, Logsig and Tansig, were applied as transfer functions. Each function with the same topology showed the different outputs having different accuracies. After initial weighting and training algorithm, transfer functions of neurons had different rotation for decreasing the errors. After each trial, which led to various topology functions, the result showed that the model including diameter and total height with transfer function of Logsig, topology of one hidden layer and fifteen neurons, was the best model to predict the volume of trees in this study. The mentioned model provided the considerable accuracy with the highest coefficient of determination (R2 = 0.99), the least mean squared error of test (MSE) and the least average deviation (AD = 0.158).
    Keywords: Artificial neural network, Carbon sequestration, Commercial volume, Mixed-beech stands, Neuron, Transfer function
  • Ehsan Kahneh, Amir Lakzian *, Alireza Astaraii, Kazem Khavazi Pages 61-70
    Frankia symbiosis with Alnus glutinosa improves the growth and nutrition of the host plant. Therefore, the establishment of high N2-fixing activities, active nodule-forming populations of Frankia in soil is desirable. In this study, seedlings of A. glutinosa were inoculated with Frankia isolated from twenty-five root nodules of A. glutinosa in different sites of Guilan province, northern Iran. The seedlings were grown in pots filled with sterilized sand in a green-house. The seedling growth, N2-fixation and nodulation were measured 10 weeks after inoculation. The Inoculated seedling had higher dry weight of shoots, roots and nodules, and nutrients content compared to control. The N2-fixing activity varied from 0.017 to 0.337 mg N mg-1 nodules. The greatest N2-fixing capacity was observed in seedlings inoculated with AG6 Frankia crushed nodules compared with other treatments. There was a significant positive correlation coefficient between nodule dry weight, plant biomass and nutrients contents, that resulted of microbial inoculation effects. The results revealed that introduced Frankia could improve the growth and N2-fixation of A. glutinosa. Thus, selection true sources of inoculums that have a considerable influence to A. glutinosa and optimizing the sustainable production of these inoculums are needed. We concluded that AG6 had a superior effect on A. glutinosa seedlings and can be used for future studies.
    Keywords: Alnus glutinosa, Frankia, Root nodule, N2-fixation
  • Zahra Mashayekhi *, Gholam Ali Sharzehi, Afshin Danehkar, Vahid Majed Pages 71-81
    This study aims to quantify the economic opportunity cost of conservation to coastal communities adjacent to mangrove forests in the southern coasts of Iran (Qeshm Island). The main commercial use of the Hara forests in this area is restricted to fishing, tourist boating trips, and limited leaves cutting. We applied a choice modeling (CM) approach to measure the value of a reduction of access under hypothetical scenarios in which local users would receive monetary compensation for lessening or forgoing mangrove forest utilization. Data were collected from the rural households living in the villages adjacent to mangrove forests and then analyzed by using conditional logit model. The results showed that the existence of a willingness to accept compensation for increases in environmental risk is associated with conservation program. Local communities are willing to accept a lower compensation when the aim of protection is to lessen the Hara cutting and fishing amount relative to recreational opportunities banning. The estimated mean WTA was 235000 IRR/hsld/day. The results also showed that there is a heterogeneity in the individual’s preferences, which attributed to factors including income, age, family size, job and experience of participation in the environmental projects.
    Keywords: choice modeling, Willingness to Accept, marginal value, Hara Forests, Direct Use Values
  • Jaafar Hosseinzadeh * Pages 83-91
    Many species used in forestation could survive even in severe conditions, but considering the growth and economic efficiency is also important. Eucalyptus species are important sources for the production of wood, paper, fuel, and oils that are commonly used for planting the forests in the tropics. The purpose of this study was to evaluate the growth of adaptable species and cultivars, industrial and fast growing eucalyptus, for planting in inefficient lands of dry areas in Ilam province. For this purpose, the vegetative growth of eight species and varieties of eucalyptus including E. camaldulensis (from four origins), E. sargentii, E. microtheca, E. melliodora and E. saligna were investigated in a five-year period.in a randomized complete block design with three replicates in Mohsenab research station of Mehran, Ilam. The data analysis was performed using ANOVA and Duncan's multiple range tests in SAS software. The results indicated that there is a significant difference between species and cultivars in terms of indicators of height, trunk diameter, and canopy. E. camaldulensis is superior regarding to vegetative growth index in this study compared to other species. Three varieties of this species has an annual production of between two to five cubic meters per hectare, Shafarood variety has shown annual yield of more than 35 m per ha.
    Keywords: eucalyptus, forest plantation, growth, Mehran
  • Zahra Ahadi, Jalil Alavi *, Mohsen Hoseini Pages 93-102
    Estimation and mapping of forest resources is a prerequisite for sustainable forest management. Site productivity is a key indicator of forest ecosystem services like wood production, carbon sequestration, etc. It allows foresters to forecast growth and production and hence select the most suitable tree species for a site. Due to the extent of Hyrcanian forests and mountainous areas in these forests that are sometimes difficult to access, it seems necessary to find suitable methods for mapping the quantitative parameters in these forests. In this study, site form index which is the most reliable criterion for evaluating the site productivity of mixed and uneven stands was used. This study aims at mapping beech forest site productivity by using ordinary kriging and inverse distance weighted in research forest of Tarbiat Modares University. For this purpose, 123 0.1 ha circular sample plots were laid out in beech dominated stands. The height and diameter of beechtrees with DBH ≥ 7.5 cm within each plot was recorded. The cross validation results showed that by using criteria such as mean error (OK=-0.036, IDW=-0.192), mean absolute error (OK=1.598, IDW=1.749), root mean square error (OK=2.053, IDW=2.223), relative mean error (OK=0.104, IDW=0.553) and relative root mean square error (OK=5.906, IDW=6.393), Kriging had significant advantage over IDW method and showed high estimation accuracy. Therefore, the methods can be applied to similar uneven-aged beech stands in the north of Iran.
    Keywords: Beech, IDW, Interpolation, Kriging, Site Productivity
  • Somayeh Solgi, Ali Salehi *, Hasan Pourbabai, Mahmoud Shabanpour, Seyed Jalil Alavi Pages 103-110
    Field capacity and permanent wilting point are used to calculate the amount of available water and generally the amount of water required by plants. Determination of these parameters usually takes much time and on the other hand there is not enough equipment for their analysis in all of the laboratories. Therefore, estimating of some soil physical and chemical properties can provide useful information to obtain the ability of hold moisture by soils. In this study, soil samples from area of Gysvm in Guilan province were taken and transferred to the laboratory and, particle size distribution, organic matter content, pH, particle density, bulk density, FC and PWP were measured. The correlation of FC and PWP with other soil properties was analyzed by using the univariate multiple regressions. The results showed that FC had significant and strong relationship with organic matter and the amount of sand (r=0.8, p
    Keywords: available water plant, Soil Moisture, regression methods, permanent wilting point
  • Reza Akhavan*, M. Akbarinia, Mohsen Hoseini Pages 111-125
    Analyzing spatial patterns of individuals within life stages and spatial associations between different life stages is essential for understanding the spatial and temporal dynamics of populations. This research was conducted to study the spatial patterns and spatial association of Juniper trees (Juniperus polycarpos C. Koch) at different life stages in Juniper forests of Layen, Northeast of Iran. Data collection was done using four one- hectare square sample plots randomly selected, which fully mapped. Spatial patterns and spatial association of different life stages (juvenile, premature and mature; based on crown diameter) were then analyzed using O- ring univariate and bivariate statistics, respectively. Results showed that the general spatial patterns of the trees in total and in every life stage was clumped at least up to 25 m, while after that tends to random distribution at larger scales. Spatial association analyses revealed that there was no significant intra-specific competition among life stages namely, the spatial association was positive (attraction) or indifferent. It is concluded that clump patterns are due to heavy fruit and dispersal limitation of Juniper trees and harsh environmental condition of the study area.
    Keywords: Juniper tree, Layen forest, O- ring statistic, spatial patterns, Spatial association
  • Hooman Abbasi *, Mohammadreza Puormajidiyan, Mohammad Hojati, Asghar Falah Pages 127-136
    The use of woody plants for phytoremediation is so valuable but before that studying on their mechanism and resistance potential of different species is necessary. In the current research, we surveyed resistance potential of two conifer species such as Cupressus arizonica and Platycladus orientalis in response to lead contamination. In this regard, one-year old seedlings of both species were grown under different concentrations of lead such as 0, 100, 200, 300,400 and 500 lead milligram per soil kilogram during a growth season and the end of the experiment time some gas exchange, physiological and growth parameters were studied on the all treatments. Statistical analysis showed that photosynthesis and physiological parameters negatively and significantly were affected by the lead contamination but the weak of the plant metabolism didn’t led to seedling mortality. The negative effects of lead contamination on growth and seedling biomass of C. arizonica was less than P. orientalis that the result showed more resistance of the species. Finally it can be concluded that each species has different mechanism in response to lead contamination but C. arizonica is more resistant in compare to C. arizonica. Surely comprehensive research is necessary for make a final decision.
    Keywords: lead contamination, growth, conifer, Photosynthesis, woody plant
  • Mehran Babaie, Yahya Hamzeh *, Mehdi Jonoobi, Alireza Ashuri Pages 137-145
    The aim of this study was to evaluate the effect of chemical modification of cellulose nanofibers (CNF) on physical, mechanical and fungal biodegradation of plasticized starch (PS) bio-composites. Composites were produced using corn starch, glycerol / water as softener and 10% (based on dry weight of both) the original and modified cellulose nanofibers as reinforcement. Successful acetylation of cellulose nanofibers process was conducted using acetic anhydride and pyridine as the catalyst. Water absorption, water vapor permeability, mechanical, dynamic mechanical properties and furthermore, fungal biodegradation of composites were investigated. The results showed that addition of CNF and acetylated cellulose nanofibers (ACNF), resulted in improved mechanical properties of the PS composite and have a significant positive effect on its water absorption. Dynamic mechanical analysis (DMA) showed that the storage modulus significantly improved by addition of cellulose nanofibers. Weight loss measurement was used to evaluate the fungal biodegradation of the nano-composite under various conditions. Obtained results revealed that the effect of addition of both (CNF & ACNF) on the weight loss was significant and increased the bio-degradation period of plasticized starch composite, especially in PS/ACNF nano-composite.
    Keywords: acetylation, biodegradation, cellulose nano fiber, plasticized starch, bio-composite
  • Amir Khosravani *, Amir Hossein Mehranfar, Mehdi Rahmaninia Pages 147-155
    Cationic starch has been widely used with various mineral nanoparticles such as nanosilica, in wet-end of papermaking. This study was aimed to study the effect of cationic starch with different degrees of substitution (DS: 0.018 and 0.045) in nanoparticle containing system with nanosilica, in recycled OCC pulp. In this respect, initially, to study the shape and dimensions of nanosilica sol particles, atomic force microscopy (AFM) and transmission electron microscopy (TEM) was used; thereby the average size of nanosilica sols were measured less than 50 nm. Moreover, in order to study the papermaking process parameters, the results revealed that high DS cationic starch (0.045) resulted more effective interactions with silica nanoparticles, so that, an increase in drainability of the furnish from 300 ml CSF for blank sample to about 560 ml CSF, was observed. In addition, as the internal bonding strength of paper can be a proper indicator of the starch performance, the effect of cationic starch DS was more prominent in the case of this strength index; such that, following application of high DS cationic starch, the internal bonding strength was raised more than twice as much. On the other hand, generally, although, due to electro-kinetics of cationic starch adsorption, reversing the charge of the whole paper-making system can be as a limiting factor for application of high DS cationic starch, but, in OCC recycling production lines, application of high DS cationic starch was much more effective.
    Keywords: degree of substitution, Drainability, retention, paper additives, nanosilica, cationic starch
  • Saleh Ghahramani, Sahab Hedjazi *, Saeed Mahdani Pages 157-165
    This study was carried out to make cellulose nanofiber reinforced Kraft liner paper from rice straw. In this regard, P.deltoides clone 69-55 as a fast growth and high yield biomass species was selected for pulp production. Variable factors of Kraft pulping process including sulfidity, active alkali, temperature and time were applied in three levels and liquor to wood ratio of 4:1. Optimum conditions of Kraft cooking were found as 23% sulfidity, 18% active alkali, 170 °C, and 180 min. cooking temperature and time, respectively. The pulping yield and kappa number of control pulp were measured as 53.94% and 17.2, respectively. Then, the pulp was refined to achieve freeness degree of 333 ml.CSF. Nano-cellulose fiber of rice straw was added to improve the strength of control kraft pulp. The nanofibers at 5, 10 and 15% loadings were mixed with pulp suspension and 60 g/m2 handsheets were manufactured by means of a laboratory handsheet maker. It was found that all the strength characteristics of prepared papers were improved by addition of nanofibers in different levels. Tensile, burst, and tear indices increased up to 26.31%, 20.08%, and 10.07%, respectively by addition of 15% cellulose nanofibers to the control pulp suspension. Moreover, bending stiffness and RCT improved to 24.48%, and 52.38%, respectively. The overall results indicated that incorporation of cellulose nanofibers had a positive effect on kraft liner pulp produced from P.deltoides.
    Keywords: Kraft pulp, deltoeidos poplar, kraft liner, paper strength, cellulose nano fiber
  • Saeed Kazemi *, Esmail Ghasemi Pages 167-177
    In this study, the effect of mixing method and nanoclay content on the physical, mechanical and morphological properties of wood plastic composite (WPC) were evaluated. Wood plastic composites were produced from recycled polyethylenes (low and high density) mixture, nanoclay and wood flour. The matrix and wood flour content were 60 wt% (LDPE 34% & HDPE 26%) and 40 wt%, respectively. Also, nanoclay was added in two levels 0 and 3 wt%. Simultaneous mixing and premixing method were used to manufacture the samples. The melt premixing samples exhibited superior physical and mechanical properties compared to the samples made by simultaneous mixing method. The composites containing nanoclay exhibited higher water absorption and lower strength properties. The results also indicated nanoclay agglomeration and poor distribution in the polymer matrix. Compared with the simultaneous mixing method, better distribution has been found for nanoclay particles in the samples made from the premixing method.
    Keywords: low density polyethylene, High density polyethylene, simultaneous mixing melt premixing, wood plastic composite
  • Sajad Akbari, Hosein Kermanian, Masoud Hashemi, Morteza Nazeriyan * Pages 179-188
    Different factors influence on the properties of wood composite panels. Evaluating all of these factors not only increases waste of time and energy but also decreases accuracy in estimation of influence value of selected factors in manufacturing panels in order to obtain optimum point of different properties of wood composite panels. Hence, application of a new statistical method is necessary for determination of model estimating production´s optimum point. This study was aimed to evaluate the artificial neural networks performance to model the physical properties of the particleboard made of canola stalks particles. The physical properties of the particleboard were modeled and estimated using different weight ratios of melamine formaldehyde to urea formaldehyde, canola stalks to poplar particles and mat moisture content through MLP, RBFN and ANFIS artificial neural networks. The results showed that MLP neural network has better performance than RBFN and ANFIS neural networks to estimate the physical properties of the particleboard. The results also showed that the artificial intelligence models have a proper precision and ability to predict the particleboard's physical properties. The results of the sensitivity analysis also showed that for estimating and , the most important parameter was mat moisture content with a positive effect on the modeling, and melamine formaldehyde to urea formaldehyde ratio was also the most effective parameter for estimating and .
    Keywords: particleboard, Physical properties, Artificial neural network, MLP