فهرست مطالب

فصلنامه چشم انداز مدیریت صنعتی
پیاپی 1 (بهار 1390)

  • تاریخ انتشار: 1390/02/06
  • تعداد عناوین: 7
|
  • علی محمدی، مهناز حسین زاده، محمد باقرزاده آذر صفحه 17

    امروزه همگام با افزایش جمعیت، صنایع به سوی فن آوری هایی میروند که بتواند هم سرعت تولید را بیشتر نمایند و هم کیفیت محصولات را بالا ببرند. طراحی، تولید و مهندسی به کمک کامپیوتر، یکی از جدیدترین فن آوری هایی است که در عرصه وسیعی از صنایع و علوم کاربرد دارد، به گونه ای که امروزه شرکتها در پی آنند که تا حد امکان، به نحوی موثر، از این فن آوری ها بهره گیری نمایند و بدین منظور، همواره در جستجوی بهترین شرکت های ارائه دهنده این قبیل خدمات برای تسهیل فرایندهای خود هستند. در این مقاله، نخست تلاش شده است تا دیدی کلی در رابطه با طراحی، تولید و مهندسی به کمک کامپیوتر ایجاد شود. سپس مدلی تلفیقی از سه تکنیک فرایند تحلیل سلسله مراتبی فازی، تحلیل رابطه ای خاکستری و برنامه ریزی چند هدفه ارائه شده است. در مطالع های موردی، این مدل به عنوان ابزاری قدرتمند برای تصمیم گیری یک شرکت برای رده بندی و انتخاب چندین شرکت دارای عملکرد برتر در زمینه طراحی و ساخت به کمک کامپیوتر، به عنوان شرکای تجاری، به کار گرفته شده است.

    کلیدواژگان: طراحی، تولید و مهندسی به کمک کامپیوتر، تحلیل رابطهای خاکستری، فرایند تحلیل سلسله مراتبی فازی، برنامه ریزی چند هدفه صفر و یک
  • حسن فارسیجانی، محمدحسین آرمان*، علیرضا حسین بیگی، اعظم جلیلی صفحه 39

    تحلیل پوششی داده ها (DEA) یک تکنیک برنامه ریزی خطی است که هدف اصلی آن، مقایسه و ارزیابی کارایی تعدادی از واحدهای تصمیم گیرنده مشابه است که مقدار ورودی های مصرفی و خروجی های تولیدی متفاوتی دارند. مدل های DEA مورد استفاده برای ارزیابی کارایی واحد تحت بررسی می توانند از دو رویکرد مجزا استفاده کنند: .1 کاهش میزان ورودی ها بدون تغییر در میزان خروجی ها (رویکرد ورودی محور) .2 افزایش میزان خروجی ها بدون تغییر در میزان ورودی ها (رویکرد خروجی محور).

    کلیدواژگان: ارزیابی عملکرد، تحلیل پوششی داده ها، مدل CCR ورودی محور، مدل CCR خروجی محور، مدل CCR ورودی خروجی محور
  • مسعود ربیعه، عادل آذر، محمد مدرس یزدی، محمد فطانت فرد حقیقی صفحه 57

    منبع یابی و تخصیص سفارش به تامین کنندگان مناسب، هزینه های تامین را به شکل قابل ملاحظه ای کاهش و قابلیت رقابت پذیری سازمان را افزایش می دهد. از طرفی در محیط پررقابت امروزی، سرعت بالای تغییرات را، بر عدم اطمینان حاکم بر تصمیم گیری ها افزوده است. با توجه به این دو مهم، به منظور افزایش اطمینان در این تحقیق، از رویکرد بهینه سازی استوار در برنامه ریزی تامین قطعات، دو محصول شرکت ایران خودرو استفاده می شود. با توجه به تعداد بالای قطعات، هر خودرو، قطعات، ارزشمند برای بررسی انتخاب گردید و مدل تامین این قطعات ، در قالب یک مدل برنامه ریزی خطی چند هدفه چند دوره ای طراحی شد. با توجه به عدم اطمینان حاکم بر برخی پارامترهای مدل ، این نوع پارامترها به صورت، متغیری تصادفی در نظر گرفته شدند. برای رفع نگرانی در مورد این نوع پارامترها، به کمک تکنیک های موجود، مدل ما به مدلی استوار تبدیل شد تا پاسخ های آن قابل اتکا باشد . در پایان، برای ارزیابی صحت عملکرد مدل و بررسی کیفیت جواب ها از تکنیک شبیه سازی استفاده شد.

    کلیدواژگان: منبع یابی و انتخاب تامین کننده، ریسک، عدم اطمینان، زنجیره تامین صنعت خودرو، مدل ریاضی استوار، شبیه سازی
  • زهرا رضایی صدرآبادی *، داود طالبی صفحه 79

    در این مقاله، یک مدل کنترل موجودی برای سیستم دو سطحی ارائه شده است که سیاست (R,Q) را در هر سطح برای IHP هر قطعه یدکی غیر تعمیری استفاده می کند، که دارای فرضیاتی است که کاربرد آن را در شرایط واقعی محدود می کند. این تحقیق با فرض گسسته بودن سفارشات و محدودیت فضای انبار، این مدل را توسعه وکاربرد آن را افزایش داده است.در شرایطی جدید، مدل سازی صورت گرفت و سپس برای حل مدل به دست آمده، الگوریتمهای فوق ابتکاری ژنتیک (GA) ورقابت استعماری (ICA) توسعه و تطبیق داده شدند. همچنین با مقایسه عملکرد دو الگوریتم، کارایی آنها ارزیابی شده است.

    کلیدواژگان: بهینه سازی موجودی، سیتم چندسطحی، الگوریتم های فوق ابتکاری، الگوریتم ژنتیک، الگوریتم رقابت استعماری
  • علی خاتمی فیروزآبادی، اسماعیل مزروعی صفحه 95

    استفاده از ابزارهای کیفی، از جمله گسترش عملکرد کیفی در صنایع مختلف به منظور بالا بردن کیفیت فرایند تولید و محصولات تولیدی، قابل توجه میباشد. اما با توجه به اینکه ارزیابی های صورت گرفته در ماتریسهای گسترش عملکرد کیفی از دقت کافی برخوردار نیست و دارای ناسازگاری در قضاوتهاست، با استفاده از روش تحلیل سلسله مراتبی به رفع این نقص پرداخته شده است. مقاله های قبلی در زمینه استفاده از این روش در ماتریس خانه کیفیت و سایر ماتریس ها مشکل داشته اند که در این مقاله با توضیح آن مشکل، روشی برای حل آن ارائه می شود. در این مقاله، ماتریس اول (خانه کیفیت) بررسی شده است. داده های مربوط به خواسته های مشتریان، از جامعه هدف جمعآوری و با استفاده از نظرات کارشناسان، الزامات فنی و مهندسی مربوط به خواسته ها تعیین شد. سپس با استفاده از تکنیک فرایند تحلیل سلسله مراتبی، ارجحیت معیارها تعیین گردید. در نهایت، ماتریس خانه تکمیل گردید و مشخص گردید که دو خواسته قیمت و عملکرد فرش و همچنین دو الزام فنی و مهندسی تعداد گره در هر متر مربع و مقدار آهار، دارای بیشترین اهمیت هستند و با توجه به روابط موجود در خانه کیفیت و سقف خانه کیفیت، افزایش تعداد گره در هر متر مربع می تواند منجر به بهبود محصول گردد.

    کلیدواژگان: گسترش عملکرد کیفی، روش تحلیل سلسله مراتبی، الزامات فنی و مهندسی، خواسته های مشتریان
  • مرجان امیدی، حمیده رضوی، محمدرضا مه پیکر صفحه 113

    در این مقاله، پس از جمع آوری و مقایسه معیارهای اثربخشی، مهم ترین معیارها تعیین می شوند و مدل جدیدی برای انتخاب اعضای تیم بر اساس روش PROMETHEE پیشنهاد می شود. برای این منظور، بر روی یک تیم کاری در یک شرکت طراحی مهندسی ایرانی مطالعه تجربی صورت گرفت و با توجه به معیارهای کمی و کیفی اثربخشی تیم، وزن آنها و مشخصات کاندیداها، بهترین گزینه ها برای تیم هدف انتخاب شدند. معیارهای مورد نظر در چهار گروه فردی، گروهی، سازمانی و شغلی طبقه بندی شدند که در صورت نیاز، با توجه به بافت نیروی انسانی و نوع خدمات در هر شرکت، قابل تغییر است. با استفاده از روش پیشنهادی، وزن معیارها به طور مستقیم در پاسخ تاثیر می گذارد و الگوریتم اجرای آن در نرم افزار DECISION LAB ساده و سریع است . نتایج این روش با نتایج روش ساختار سلسله مراتبی گروهی GAHP مقایسه و تایید شده است. به علاوه، نتایج به دست آمده، کاملا منطبق با نظرات تجربی مسوول تیم است و لذا انتخاب نهایی تائید می گردد.

    کلیدواژگان: انتخاب اعضای تیم، تصمیم گیری، PROMETHEE، GAHP
  • سید حسن حاتمی نسب، سیدمحمود زنجیرچی صفحه 135

    دانش به عنوان مهمترین جنبه رقابتی آن سازمان را قادر می سازد تا بهره ور باشد و از محصولات و خدمات رقابتی رها شود. یکی از پایه های افزایش بهره وری مدیریت دانش، چابک بودن موثر است. حجم بالای توسعه ادبیات در حوزه مدیریت دانش و چابکی سازمانی، اهمیت این دو مقوله را نشان می ده . ما در این مقاله، شکلی از همگرایی این دو را از این نظر که ابعاد آنها قویا با یکدیگر ارتباط دارند، مورد آزمون قرار می دهیم و استدلال می کنیم که چابکی سازمانی زمانی حاصل می شود که مدیریت دانش، از هر حیث، در حال تعادل باش . شرکت های نساجی شهرستان یزد به عنوان مورد مطالعه انتخاب شدند و وضعیت چابکی و مدیریت دانش در آن ها)با کمک پرسش نامه) ارزیابی شد . این مقاله به بیان دستاوردهای این بررسی می پردازد.

    کلیدواژگان: چابکی، مدیریت دانش، زیرساخت، فرایند، صنعت نساجی
|
  • Ali Mohammadi, Mahnaz Hosseinzadeh, Mohammad Bagherzadeh Azar Page 17

    Today, with regard to growth and population increase, industries are moving towards technologies so that could increase production speed and boost the quality of products. Design, manufacturing and engineering with computer is one of the newest computer technologies, which helps companies to reach their goals in a wide field of industry and science. Therefore, companies today are looking for as much as possible an effective way of utilizing these technologies and to this end always seek the best companies offering these services to facilitate their processes. This article will first attempt to provide a general view for readers about design, production and engineering with computer and then a hybrid model that consists of three methods "Fuzzy analytical hierarchy process", "Grey relational analysis" and "Multi objective programming" is presented. In a case study this hybrid model is applied as a powerful tool in decision making in relation to classification and selection of several companies that have superior performance in the field of design and manufacturing with computer to select business partner.

  • Hassan Farsijani, Mohammad Hossein Arman, Ali Reza Hosein Beigi, Azam Jalili Page 39

    Data Envelopment Analysis (DEA) is a linear programming technique for measuring and evaluating the relative efficiencies of similar decision making units (DMUs). DEA models use two separate approaches for evaluating the efficiency: minimizing the inputs without reducing the outputs (input-oriented approach) and maximizing the outputs without increasing the inputs (output-oriented approach). The input minimizing model provides information on how much could the consumable resources be reduced while delivering the same level of the outputs. The output maximization model provides information on how much outputs production can be improved using the same consumable resources. The purpose of this model is to develop a new DEA model with both input-oriented and output-oriented approaches. The aim of this model is minimizing the inputs and maximizing the outputs simultaneously. this model provides information on how much could the consumable resources be reduced and how much outputs production can be improved simultaneously. A numerical experiment is used to illustrate this approach and compare the results of this approach to other two approaches.

  • Masood Rabieh, Adel Azar, Mohammad Modares Yazdi, Mohammad Fetanat Fard Haghighi Page 57

    Sourcing and order allocation to appropriate suppliers can significantly reduce costs of supply and increase the competitiveness of organizations. Furthermore in today turbulent environments, high speed of changes increase uncertainty in decision-making. In this research robust optimization approach is used to increase certainty in planning of supply of parts for two products of Iran Khodro Company. With considering high number of parts in any product, important parts selected for this survey. Model of supply for these parts in form a multi period multi objective linear programming model designed. With considering uncertainty some of parameters of model, these parameters in form interval considered. In order to remove worry about these parameters, model with help available techniques convert to robust model to have dependable solutions. Finally, the quality of solutions is analyzed by simulation technique.

  • Zahra Rezaey Sadrabadi, Davod Talebi Page 79

    In this paper, a two-echelon inventory system is presented that implements (R, Q) policies at each inventory holding point (IHP) for each non-repairable spare part at each echelon that contains assumptions that limit the real world applications. This paper in order to expand this model and increase its application, assumes that orders are discretely and warehouse space is limited. In the new condition, modeling is carried out and then for solving the model, genetic algorithm (GA) and imperialist competitive algorithm are expanded and calibrated. Also, efficiency of algorithms is evaluated with comparing their operations.

  • Ali Khatami Firouz Abadi, Esmaeil Mazrouei Page 95

    The use of qualitative measures has been considered more often lately; for instance, the quality function deployment in various industries for the sake of higher quality. But because of the inaccuracies in the matrixes of QFD, we have used AHP to overcome the problem. In previously written papers, there has been a slight error in the quality matrix and also some other matrixes which is discussed in this paper and a method is presented for the case. The first matrix (house of quality) is discussed in this paper. The data related to customer's needs has been collected and the technical requirements of the needs were determined concerning the experts ideas. Then, the priority of the criteria was determined by AHP. Finally, the house of quality matrix fully developed and two factors of price and carpet function and also, technical qualities such as the number of knots in each square meter and the amount of starch, gained the most importance. According to the relations observed in the quality house and its roof, an increase in the number of knot causes a significant increase in the overall quality.

  • Marjan Omidi, Hamideh Razavi, Mohammad Reza Mahpeykar Page 113

    In this paper, a new approach to team staffing is proposed using effectiveness criteria and PROMETHEE method. Initially, the most important criteria are identified through background studies, the questionnaires and interviews, and their comparison. These criteria are both quantitative and qualitative and can be classified in four groups including: personal, team working, organizational and occupational; and can be modified based on the nature and the virtue of the company. In addition to the criteria, scaled weights and the candidates’ specifications constitute the input to the model. Next, PROMETHEE technique in Decision Lab software is applied for solving the model. Since the weights of the criteria directly affect on the responses, the technique works straightforward and efficient. It promptly specifies an order of the best choices of members for the team which is perfectly in agreement with the arrangement suggested by the head of the team. This model is finally verified with GAHP method and the validation of the results is confirmed.

  • Sayyed Hassan Hatami Nasab, Sayyed Mahmoud Zanjirchi Page 135

    Knowledge is considered as the main competitive asset of the organization, enabling the enterprise to be productive and to deliver competitive products and services. One of the knowledge management improving productivity is effective agilness. A very large proportion of the literature on KM and organisational Agility is developed show importance of these. We examined a kind of these convergences in the paper from the point of view that all of these concepts are strongly interrelated, and argued that organizational agility is achieved when knowledge management aspects are balanced. We selected Textile firms of Yazd and evaluated agility and KM statuse of them - by questionnaire. The paper will explain issues of this survey.