فهرست مطالب

نشریه مطالعات در دنیای رنگ
سال نهم شماره 1 (پیاپی 32، بهار 1398)

  • تاریخ انتشار: 1398/01/13
  • تعداد عناوین: 7
|
  • امیر صمدی نجیب زاد، رضا امینی*، مهران رستمی، پونه کاردر صفحات 1-12
    روش های متعددی برای کاهش نرخ خوردگی در نظر گرفته شده است. یکی از روش های موثر محافظت در برابر خوردگی، استفاده از پوشش های تبدیلی می باشد. اما، پژوهشها برای یافتن جایگزین مناسب برای پوششهای تبدیلی به علت معضلات محیط زیستی و سرطانزایی از سال 1970 میلادی شروع شده است. یکی از مهم ترین جایگزین این پوشش ها به-خصوص برای سامانه های تک لایه، پوششهای سل ژل از نوع سیلان، حاوی بازدارنده ی خوردگی است که علاوه بر جبران مشکلات زیست محیطی، توانسته است خواص حفاظت خوردگی مطلوب تری نسبت به پوششهای تبدیلی متداول ازخود نشان دهد. علاوه بر این، روش سل ژل یک روش سازگار با محیط زیست است که بهبود عملکرد محافظتی آن در زمینه های مختلف مانند فولاد، آلومینیوم، مس، منیزیم و آلیاژهای آن ها، مشاهده شده است. دراین روش ناخالصی ها به آن وارد نمیشود و در پایان فرایند، محصول نیاز به شستشو ندارد. دمای فرایند سل ژل به طور کلی کم است (اغلب نزدیک به دمای اتاق) بنابراین تبخیر حرارتی ترکیبات آن مانند بازدارنده های معدنی به حداقل میرسد. از آن جا که از پیش ماده های مایع دراین روش استفاده میشود، امکان تولید پوششهایی برای شکلهای پیچیده و هم چنین تولید فیلمهای نازک بدون نیاز به ذوب کردن وجود دارد.
    کلیدواژگان: پوشش های سل ژل سیلانی، پوششهای تبدیلی، خوردگی، بازدارنده های خوردگی
  • مهسا گل محمدی، علی اصغر صباغ الوانی*، حسن سامعی، رضا سلیمی صفحات 13-22
    صنعت نساجی یکی از صنایعی است که پساب آن ها به عنوان یکی از بزرگ ترین مخاطرات محیط زیست شناخته می شود. پساب این صنعت حاوی مقدار زیادی ماده رنگزا ، مواد شیمیایی و فلزات سنگین استکه برای سلامتی انسان و محیط زیست خطرناک هستند. انعقاد، روش زیستیو اکسایش پیشرفتهازجمله روش های کاربردی هستند که در تصفیه پساب ها مورداستفاده قرار می گیرند. سازوکار اصلی فرآیندهای اکسایش پیشرفته بر پایه تولید رادیکال هیدروکسیل است که این رادیکال ها قادرند ترکیبات مقاوم در برابر اکسایش را تخریب کنند. همچنین، استفاده از نیمه رساناهایی با شکاف انرژی مناسب که بتوانند پاسخ خوبی در برابر تهییج نور مرئی از خود نشان دهند به بهبود این فرآیند کمک شایانی می کند. از طرفی، اکسید گرافن کاهش یافته برای بهبود خواص فوتوکاتالیستی و درنتیجه بهبود حرکت الکترون ها به کار گرفته می شوند. لذا، همراهی این دو ماده در کامپوزیت، بازده عملکرد فوتوکاتالیستی را به میزان قابل توجهی افزایش داده و سبب ایجاد خواص جذب بالا و رسانایی شده که این امر سبب می شود، تخریب نوری آلودگی ها به مقدار به سزایی تسهیل گردد. حال، قرارگیری این مواد در غشا پلیمری، ضمن بهبود فرآیند فوتوکاتالیستی از ورود ذرات کاتالیزورنوری به داخل پساب تصفیه شده نیز ممانعت به عمل می آورد.
    کلیدواژگان: اکسید گرافن احیاشده، کاتالیزورنوری، تخریب ماده رنگزا، غشا پلیمری
  • فاطمه خسروی محمدسلطان، محمود حاجیانی، امین الدین حاجی* صفحات 23-39
    توسعه زندگی اجتماعی و صنعتی شدن کشورها منجر به آلودگی های زیست محیطی فراوانی شده است. از میان آلاینده های صنعتی که به جریان های آبی ورود پیدا می کنند، مواد رنگزا به دلیل پایداری و مقاومت شیمیایی از اهمیت ویژه ای برخوردار هستند. با توجه به پیچیدگی آلاینده های ورودی به منابع آبی، استفاده از روشی با کارایی بالا در حذف مواد رنگزا، امری اجتناب ناپذیر می باشد. از میان جاذب های مختلف، نانوالیاف پلیمری، به دلیل وزن کم، سطح مخصوص زیاد، ساختار متخلخل پیوسته و قابلیت عامل دار شدن، به عنوان مواد غشایی موثر، در زمینه پالایش های زیست محیطی بکارگرفته می شوند. علاوه براین، جاذب های نانولیفی اصلاح شده، عملکرد جذب را به طور موثری بهبود می بخشند. در این مقاله، تحقیقات مختلف انجام شده در زمینه کاربرد نانوالیاف پلیمری مختلف در جداسازی موادرنگزا از آب، مرور و نتایج تحقیقات انجام شده در هر مورد بررسی و مقایسه شده است.
    کلیدواژگان: مواد رنگزای مصنوعی، جذب سطحی، نانوالیاف، الکتروریسی
  • زهرا احمدی*، فاطمه غلامی هوجقان صفحات 41-58
    گیاهان بسیاری در سراسر جهان شناخته شده اند که دارای خواص دارویی-پزشکی از جمله خواص ضد باکتری، ضد میکروبی و ضد قارچ هستند. ترکیبات شیمیایی ضد باکتری و یا ضد میکروبی احتمال ایجاد حساسیت یا آلرژی در کاربر را دارند. علاوه بر این در فرآیند تولید و به کار گیری می توانند پساب های زیادی را وارد محیط زیست کنند که تصفیه و بازیافت آنها هزینه بر است. تحقیقات زیادی در این رابطه انجام شده که با بهره گیری از ترکیبات گیاهی دارای این خاصیت بتوان خاصیت ضد باکتری و ضد میکروبی و قارچ را در منسوجات ایجاد نمود. منسوجات یکی از ملزومات ضروری است که همه انسان ها به وفور در زندگی خود از آن ها استفاده می نمایند. امروزه به دلایل مختلفی از جمله مشکلات زیست محیطی تمایل به استفاده از ترکیبات طبیعی به جای مواد مصنوعی در صنایع نساجی از جمله فرآیند رنگرزی افزایش یافته است. علاوه بر این در فرآیند رنگرزی استفاده از برخی ترکیبات گیاهی (رنگ دهنده و یا غیر رنگی) می تواند خواص ضدباکتری، ضد میکروبی و ضد قارچ را حاصل نماید. این پژوهش مطالعات صورت گرفته در این حوزه و نتایج حاصل را به صورت مجموعه ای مدون نموده تا در تحقیقات آتی و کاربردی مورد استفاده قرار گیرد.
    کلیدواژگان: ضد باکتری، مواد رنگزای گیاهی، منسوجات، رنگرزی طبیعی، ضد میکروبی
  • مژگان حسین نژاد*، شهره روحانی صفحات 59-69
    روش ماکروویو به عنوان یک فرآیند جدید برای سنتز انواع ترکیبات آلی ازجمله مواد رنگزا مورد توجه قرار گرفته است. این روش دارای مزایای متعددی است که عبارتند از: سهولت انجام، سریع بودن، مقرون به صرفه بودن و بازدهی بالا. مواد رنگزا کاربردهای زیادی در حوزه های مختلف دارند. مواد رنگزای آلی دارای ویژگی های فوتوفیزیکی و فوتوشیمیایی و کاربردهای زیستی متفاوتی هستند. مهم ترین گروه های مواد رنگزا که با روش ماکروویو توسعه یافته اند عبارتند از: نفتالیمیدها، فنوتیازین ها، فلورسئین ها، پیریدینیم، سیانین ها، کوئینولین ها، کومارین ها، تری آزوکوئینوکسازین ها و ترکیبات مونوآزو دیسپرس. عواملی مانند دما، نوع حلال و قدرت تابش بر روی پیشرفت واکنش و بازده نهایی اثر بسزایی دارند. انتقال انرژی توسط فرآیند ماکروویو در محیط واکنش در حدود 9-10 ثانیه است. این مقاله مروری بر کاربرد روش ماکروویو برای سنتز مواد رنگزا با ویژگی های فلورسنس، لومینسانس و فوتوفیزیکی است.
    کلیدواژگان: مواد رنگزای فلورسنت، ماکروویو، بازده، سنتز، نفتالیمید
  • داود قنبری، بهزاد شیرکوند هداوند*، ملیحه پیشوایی صفحات 71-87
    اغلب پوشش های آلی به دست آمده از تولید محصولات تجاری رنگ و پوشش، ویسکوالاستیک می باشند. مطالعه رفتار ویسکوالاستیک این پوشش ها بعد از پخت آنها یکی از آزمون های مهم است که اطلاعات مفیدی را در مورد عملکرد پوشش پخت شده در اختیار ما قرار می دهد. در این مقاله رفتار ویسکوالاستیک رزین ها، پوشش ها و نانوکامپوزیت های آنها با استفاده از دستگاه آنالیز دینامیکی، مکانیکی حرارتی(DMTA) بررسی شده است. به کمک DMTA مقادیر مدول ذخیره، مدول اتلاف و همچنین ترم اتلاف به عنوان تابعی از دما یا بسامد بدست می آیند. DMTA یک روش مفید برای بررسی ساختار پلیمر مانند متوسط وزن ملکولی بین زنجیرهای شبکه ای شده، چگالی شبکه ای شدن، میزان همگن یا ناهمگن بودن رزین های شبکه ای شده، میزان امتزاج پذیری در ترکیب رزین ها، میزان نسبی پراکنش نانوذرات در بستر رزین می باشد. همچنین کمیت های فیزیکی مختلفی مانند نقطه ژل شدن، دمای انتقال شیشه ای، چگالی شبکه ای شدن، درصد تبدیل پخت، گرانروی کمینه در حین فرآیند پخت، انرژی فعال سازی دمای انتقال شیشه ای، ضریب شکنندگی، ضریب جابجایی در رابطه ویلیام- لاندل- فری (WLF) و بررسی انتقال های α و β و γ به کمک DMTA مورد بررسی قرار می گیرد.
    کلیدواژگان: خواص ویسکوالاستیک، دستگاه آنالیز دینامیکی مکانیکی حرارتی، پوشش آلی، رزین، نانوکامپوزیت
  • صفحات 89-90
|
  • Amir Samsadi Najibzad, Reza Amini *, Mehran Rostami, Pooneh Kardar Pages 1-12
    Numerous approaches are in practice to mitigate corrosion. Among all of these approaches, conversion coatings play an effective/promising role in corrosion protection. However, studies have begun to find an alternative to conversion coatings due to environmental problems and carcinogens since the 1970s. One of the most important alternatives to these coatings is the silane-based sol-gel coating containing a corrosion inhibitor which in addition to environmental problems, has improved corrosion protection properties compared to conventional conversion coatings. In addition, the sol gel method is an environmentally friendly method that has been shown to improve the protective performance of sol gel coatings in various fields such as metal, such as steel, aluminum, copper, magnesium and alloys. In this method, impurities do not enter and at the end of the process, the product does not need to rinse. The sol gel process temperature is generally low (often close to room temperature), so thermal evaporation and degradation of receptor species, such as inorganic inhibitors, are minimized. Because liquid precursors are used in this method, it is possible to produce complex coatings as well as to produce thin films without the need for machining or melting.
    Keywords: Silane-based sol gel coatings, Conversion coatings, corrosion, Corrosion inhibitor
  • Mahsa Golmohammadi, Aliasghar Sabbagh Alvani *, Hassan Sameie, Reza Salimi Pages 13-22
    Textile industry is one of the industries that its waste has been known as one of the most important environmental hazards. This wastewater contains large amount of dyes, chemicals compounds and heavy metals that are dangerous to human health and the environment. Coagulation, biological methods and advanced oxidation are the most widely used methods in the treatment of wastewater. The main mechanism of advanced oxidation processes generates low waste and uses hydroxyl radicals as their main oxidative power, which these radicals can destroy oxidation-resistant compounds. Also, the use of semiconductors with a suitable energy gap that can respond well to the stimulation of visible light helps to improve this process. On the other hand, reduced graphene oxide is used to improve photocatalytic properties and, consequently, to improve the motion of electrons. Therefore, the combination of these two materials in the composite significantly increases the photocatalytic performance efficiency and causes high absorption and conductivity properties, which resulted to degradation of the pollutants.In addition, fixing these materials in the polymer membrane, while improving the photocatalytic process can prevent of dispersion of photocatalyst particles into refined effluents.
    Keywords: Reduced Graphene-Oxide, photocatalyst, dye degradation, Polymeric Membrane
  • Fatemeh Khosravi Mohammad Soltan, Mahmood Hajiani, Aminoddin Haji * Pages 23-39
    The development of social life and the industrialization of countries have led to increased environmental pollution.Among the industrial pollutants entering the water flow, synthetic dyes are of particular importance due to their chemical stability and resistance to bio-degradation. Due to the complexity of contaminants found in the water resources, the use of high-performance adsorbents in dye removal is unavoidable. Among the various adsorbents, polymer-based electrospun nanofibres can be used as effective membrane materials for environmental refinement due to light weight, high surface area and continuous porous structure and functionality. In addition, modified    nanofiber adsorbents improve the absorption performance effectively. In this study, several investigations reported on the field of the application of polymeric nanofibers in dyes separation from aqueous media have been reviewed and the results of the reported literature in each case, have been studied and compared.
    Keywords: synthetic dye, Adsorption, nanofiber, Electrospinning
  • Zahra Ahmadi *, Fateme Gholami Houjeghan Pages 41-58
    Today, for various reasons, including environmental problems, natural ingredients are used instead of synthetic materials in the textile industry, specially the dyeing process. In addition, in the dyeing process, the use of some other herbal compounds gives special properties.  Antibacterial or antimicrobial chemical compounds in the production and using process induce a lot of wastewater into the environment, which is costly to clean and recycle. Textiles are one of the inevitable requirements that all humans use in their lives abundantly. Today, for various reasons, including environmental problems, the tendency to use natural compounds instead of synthetic materials has increased in the textile industry, including the dyeing process. Furthermore, using the herbal compounds can create special properties such as antibacterial and antimicrobial properties in textiles. A lot of research has been done in this regard. This research has been reviewed the results of researches in this area and classified them that will be easy for using in the new research and application of results.
    Keywords: Antibacterial, Natural Dye, Textile, Natural dyeing, Anti-microbial
  • Mozhgan Hosseinnezhad *, Shohreh Rouhani Pages 59-69
    The microwave-assisted has been regarded as a new strategy in the synthesis various organic compounds especially organic dye. The technique offers a lot of advantages as it is simple, rapid, economic and efficient. Dyes are effective molecules have pivotal effects in several fields. Organic dyes were endowed with a diverse of photophysical and photochemical and biomedical applications. Novel microwave synthetic method for many types of dyes including naphthalimides, phenothiazines, fluorescein, pyridinones, cyanines, quinolines, coumarins, triazoloquinoxalines and monoazo disperse dyes were demonstrated. Factors like temperature, type of solvent and power control microwave reactions. Microwaves possess the potential to transport energy from one medium to another in a small duration of 10−9 s with every run of electromagnetic energy. This review highlights microwave applications for the synthesis of dyes with fluorescence, luminescence and photophysical properties.
    Keywords: Fluorescent dye, Microwave, Efficiency, Synthesis, Naphthalimide
  • Davood Ghanbari, Behzad Shirkavand Hadavand*, Malihe Pishvaei Pages 71-87
    Most organic coatings obtained from commercial paint and coating products are viscoelastic. The study of the viscoelastic behavior of these coatings after curing is one of the important tests that provide useful information on the performance of the cured coating. In this paper the viscoelastic properties of resins, coatings and their nanocomposites using the dynamic mechanical thermal analysis (DMTA) is investigated. With DMTA, the values of storage modulus, loss modulus and also the loss term as a function of temperature or frequency are obtained. DMTA is a useful method for investigating the polymer structure, such as the average molecular weight of the cross-linked chains, cross-link density, the homogeneity or heterogeneity of the cross-linked resins, the degree of incompatibility in the resin composition, the distribution of nanoparticles in the resin matrix. Also different physical quantities such as gelatinization point, glass transition temperature, cross-link density, curing conversion percentage, minimum viscosity during curing process, energy of activation of glass transition temperature, brittleness coefficient, displacement coefficient in the William-Lundley-Fry (WLF) relation and investigation of α, β and γ transitions are investigated using DMTA.
    Keywords: Viscoelastic properties, DMTA, Organic coating, Resin, Nanocomposite