فهرست مطالب

علوم و فناوری نساجی - سال یکم شماره 1 (زمستان 1390)

فصلنامه علوم و فناوری نساجی
سال یکم شماره 1 (زمستان 1390)

  • تاریخ انتشار: 1391/01/18
  • تعداد عناوین: 7
|
  • محمود نصیری، علیرضا تهرانی بقا صفحات 5-9
    استرکوات ها سطح فعال های کاتیونی با قابلیت تجزیه زیستی هستند که امروزه بیشترین مصرف را به عنوان پایه نرم کننده های البسه پیدا کرده اند. در این پژوهش، سنتز استرکوات ها از واکنش آلکانول آمین ها با اسید چرب پیه و متیل استر پالم استئارین گزارش شده است. کاتیونی کردن استر کوآت ها با نسبت های مختلف دی متیل سولفات انجام شد. راندمان و جزء فعال مواد فعال سطحی سنتز شده مورد بررسی قرار گرفت. ویژگی های استرکوآت های سنتز شده از جمله میزان نرم کنندگی، رطوبت پذیری و چروک پذیری آنها بر روی پارچه هایی از جنس پنبه، پلی استر و مخلوط پنبه/پلی استر، بر اساس روش های استاندارد ASTM مورد بررسی قرار گرفت. نتایج نشان داد که پارچه های عمل شده با استرکوات های تولیدی دارای نرمی مناسب و برگشت از چروک بالایی بوده و میزان کاهش جذب رطوبت در پارچه های عمل شده در حد قابل قبولی می باشد.
    کلیدواژگان: استرکوات های کاتیونی، پارچه، نرم کننده، برگشت از چروک، جذب آب
  • محمد سیف پور، مهدی نوری، جواد مختاری صفحات 10-18
    استفاده از سیستم های ذخیره گرمای نهان با استفاده از مواد تغییر فاز دهنده PCM راه موثری برای ذخیره انرژی است و جزو منابع تجدید پذیر و جدید انرژی به حساب می آید. مواد تغییر فاز دهنده طی فرآیند ذوب، انرژی گرمایی را به صورت گرمای نهان ذخیره کرده و طی انجماد این انرژی را آزاد می کنند. امروزه استفاده از این مواد در منسوجات به بهبود خواص گرمایی و سرمایی آنها کمک کرده است. روش های مختلفی نظیر روکش دادن، تورق و حبس داخل کپسولی برای این منظور وجود دارد. همچنین یکی از جدیدترین رویکردهای دانش مواد تغییر فاز دهنده، استفاده از فناوری نانوالیاف به منظور پایداری ابعادی این مواد می باشد. در این مقاله انواع مختلف مواد تغییر فاز دهنده و کاربرد آنها در منسوجات مورد بررسی قرار گرفته است.
    کلیدواژگان: مواد تغییر فاز دهنده، ذخیره انرژی گرمایی، حبس داخل کپسولی، نانوالیاف
  • هادی دبیریان، هادی خیرآبادی صفحات 19-24
    استفاده از سیستم های مختلف تولید در کارخانجات پوشاک، تاثیر قابل ملاحظه ای بر بهره وری تولید خواهد داشت. به منظور بررسی این موضوع در پژوهش حاضر، خط تولید پیراهن کلاسیک یک واحد تولیدی با دو سیستم مختلف پیش رونده دسته ای (PBS) و خط مستقم، بالانس شد. سپس بهره وری ماشین آلات (MP) و بهره وری نیروی انسانی (LP) واحد تولیدی یاد شده برای هر دو حالت PBS و SLS محاسبه شده و مورد مقایسه قرار گرفتند. نتایج بیانگر آن است که با اعمال سیستم خط مستقیم (SLS)، بهروه وری ماشین آلات و نیروی انسانی واحد تولیدی در خط تولید پیراهن افزایش می یابد که در نتجه آن، تعداد ماشین ها و نیروی انسانی مورد استفاده کاهش می یابد.
    کلیدواژگان: سیستم پیش رونده دسته ای، سیستم خط مستقیم، بهره وری ماشین، بهره وری نیروی انسانی، پیراهن کلاسیک، پوشاک
  • شمیم ضرغام، سعید بازگیر، ابوسعید رشیدی، امیر توکلی صفحات 25-30
    در این مقاله جهت بررسی تاثیر پارامترهای کلیدی از جمله غلظت، ولتاژ الکتریکی، فاصله و دبی بر روی جریان الکتریکی در فرآیند الکتروریسی، همچنین به دست آوردن رابطه جریان با پارامترهای ذکر شده و قطر الیاف، از غلظت های مختلف و در محدوده 25-10 درصد وزنی- حجمی نایلون در اسید فرمیک استفاده شد. همچنین به منظور دسترسی به قطر بهینه، آزمایشاتی در دو بخش اصلی صورت گرفت که می توان بخش اول را مربوط به بررسی روند تغییر متغیرها و بخش دوم را به بهینه سازی شرایط فرآیندی جهت حصول به الیافی با حداقل قطر، مربوط دانست. در تمامی آزمایشات از آمپرسنج، جهت بررسی جریان الکتریکی در مدت زمان 12 دقیقه ریسندگی و میکروسکوپ الکترونی پویشی، جهت بررسی مورفولوژی و قطر الیاف استفاده گردد. نتایج حاکی از آن بود که ی جریان الکتریکی با غلظت محلول پلیمری و ولتاژ الکتریکی رابطه مستقیم و با فاصله سوزن تا جمع کننده رابطه معکوس دارد؛ در حالی که دبی اثر متفاوتی را از خود بر جای می گذارد. در طول آزمایشات، جریان الکتریکی در فواصل زمانی مختلف، متغیر بود. در حالی که در نمونه بهینه که مورفولوژی آن نیز توسط دستگاه SEM مورد بررسی قرارگرفته بود، جریان به طور کاملا یکنواخت و پایدار در آمده بود.
    کلیدواژگان: الکتروریسندگی، قطر نانو الیاف، جریان الکتریکی
  • سید مهدی حجازی، سید مهدی ابطحی، رضا علی پور، محمد شیخ زاده صفحات 31-34
    قیر، المان اصلی ساخت مخلوط های آسفالتی است. هر چند درصد حضور این ماده در آسفالت، ناچیز می باشد، اما اثر مهمی در تعیین خواص مکانیکی محصول منتج دارد. قیر با افزایش دما به تدریج نرم می شود و همین مساله موجب پدید آمدن پدیده موج افتادگی در سطح آسفالت می شود. از سوی دیگر، با کاهش دما قیر شکننده می شود و انواع ترک بر سطح آسفالت پدیدار می گردد. بنابراین، بحث تقویت و تسلیح آسفالت و به تبع آن، قیر، مقوله پراهمیتی است. در این مقاله، نتایج پژوهش انجام شده بر عملکرد الیاف نساجی گوناگون در قیر و تحلیل نتایج به کمک مکانیک کامپوزیت ها ارائه خواهد شد. الیاف مورد استفاده عبارتند از: نایلون 6.6، پلی استر (معمولی و تکسچره)، پلی پروپیلن و الیاف شیشه. آزمایش های انجام شده بر روی قیر نیز شامل نقطه نرمی، درجه نفوذ و خاصیت انگمی (داکتیلیتی) می باشد که در این مقاله، نتایج آزمون داکتیلیتی مورد بررسی واقع شد. بر اساس نتایج آزمایشگاهی حاصل، مشخص گردید که به طور کلی، حضور الیاف در قیر سبب کاهش کشش پذیری قیر خواهد شد.
    کلیدواژگان: قیر، تسلیح مکانیکی، الیاف، خاصت انگمی
  • کمال الدین قرنجیگ، محمد دودانگه، سجاد ولیخانی صفحات 35-38
    در این تحقیق یک ماده رنگزای دیسپرس جدید بر پایه ی مشتقات تیازول سنتز و خواص رنگرزی آن بر روی الیاف پلی استر مورد بررسی قرار گرفته است. بدین منظور 2- آمینو- 6- نیترو بنزوتیازول دی آزوته شد و در محیط اسیدی با N،N -3 - دی اتیل آمینو- استانیلید، پیوند گردید. ماده رنگزای سنتز شده به روش TLC خالص سازی شده و از طریق آنالیز دستگاهی UV-vis، DSC، FTIR، 1HNMR مورد شناسایی و تایید قرار گرفت. همچنین خواص اسپکتروفتومتری ماده رنگزای سنتز شده تعیین گشته و ویژگی های ضد میکروبی آن ارزیابی شد. نتایج نشان دادند که ماده رنگزای سنتز شده در مقابل هر دو نوع باکتری استافیلاکوکوس طلایی و اشریشیا کولی، خاصیت ضد میکروبی دارد. در ادامه دیسپرسیونی از ماده رنگزا تهیه شده و بر روی پارچه پلی استر به کار گرفته شد و در نهایت نیز خواص رنگرزی آن بررسی گردید. نتایج نشان می دهد که ماده رنگزای سنتز شده علاوه بر دارا بودن ثبات های شستشویی، تعرق و سایشی عالی و نیز ثبات های نوری و تصعیدی متوسط بر روی الیاف پلی استر، از یکنواختی و قابلیت رنگرزی خوبی بر روی این الیاف برخوردار می باشد.
    کلیدواژگان: ماده رنگزای دیسپرس، سنتز، رنگرزی، پلی استر، ثبات تصعیدی
  • داریوش سمنانی، سعید آجلی*، الهام امیرنصر صفحات 39-42

    امروزه نقش منسوجات فنی در زمینه های مختلف صنایع، کشاورزی و پزشکی دارای اهمیت روز افزونی می باشد. این امر به واسطه خواص مناسب آنها از قبیل سبکی، الاستیسیته مناسب، ثبات ابعادی قابل قبول، استحکام بالا، مقاومت در برابر خوردگی و فاسد شدن، همواره موجب کاهش هزینه ها می گردد. در منسوجات، با توجه به پیچیدگی های موجود در محیط های لیفی از نظر خواص هندسی و مکانیکی، از روش های عددی جهت تحلیل مسائل مختلف استفاده می گردد. در این پژوهش سعی شده است با استفاده از روش اجزاء محدود رفتار آویزش پارچه های تور حلقوی تاری که یکی از ویژگی های مهم آنها می باشد، مورد توجه قرار گرفته و نحوه توزیع تنش در قسمت های مختلف یک سلول بافت بررسی گردد.

    کلیدواژگان: پارچه های تور حلقوی تاری، روش اجزاء محدود، نخ لید، این، آویزش عمودی
|
  • M. Nasiri, A. Tehranibagha Pages 5-9
    Esterquats are biodegradable cationic surfactants، and they have been used widely in fabric softeners and hair conditioners. In this study، the synthesis of esterquats by reacting alkanolamines with Tallow Fatty Acid (TFA) and Palm Stearin Methyl Ester (PMES) has been reported. The obtained esters were subjected to quaternization with different molar ratios of dimethyl sulfate (DMS). The synthesized esterquats were evaluated for yield and cationic content. The physical properties of treated fabrics (cotton، polyester and cotton/polyester) such as softening، water absorption and wrinkle recovery were studied according to ASTM standard test methods. The fabrics treated with cationic esterquats showed very good softening and crease recovery and the decrease of water absorption was acceptable.
    Keywords: Cationic esterquats, Fabric, Softener, Crease recovery, Water absorption
  • M. Seifpour, M. Noori, J. Mokhtari Pages 10-18
    Using Phase Change Materials (PCM) in latent heat storage systems is an effective way to saving energy. PCMs save the thermal energy in the form of latent heat during the melting process and release this energy during freezing process. Nowadays، using PCMs in textiles improves their heating and cooling characteristics. There are several methods for this purpose such as coating، lamination and encapsulation. One of the newest approaches in PCM science is utilization of nanofiber technology to shape stabilization of these materials. In this paper، different kinds of PCMs and their application in textiles were introduced.
    Keywords: Phase change material, Thermal energy storage, Encapsulation, Nanofiber
  • H. Dabiryan, H. Kheirabadi Pages 19-24
    Using different production system in apparel factories has considerable effect on productivity of production lines. In the present study، a shirt classic line was balanced by using different production systems، i. e. Progressive Bundle System (PBS) and Straight Line System (SLS). Then Machine Productivity (MP) and Labor Productivity (LP) of mentioned line were calculated and compared for PBS and SLS cases. The results showed that، using SLS in producing shirt classic، increase MP and LP of production line. Consequently، number of machines and operators in line will be decreased.
    Keywords: Progressive Bundle System, Straight Line System, Machine Productivity, Labor Productivity, Shirt, Classic, Apparel
  • Sh. Zargham, S. Bazgir, A. Rashidi, A. Tavakoli Pages 25-30
    In order to investigate the effect of key parameters، such as concentration، electric voltage، distance and flow rate on electric current and fibers diameters in the process of Electrospinning، and also finding a relation between current and the parameters mentioned above، we have used nylon 6 solutions in the range of 10–25wt%. With the purpose of producing the least diameter in fiber، the experiments were conducted in two main sections. The first section is about investigating the effects of parameters to achieve trend behavior while the second part is belonging to optimizing the process. In all experiments، micro ammeter and scanning electron microscopy (SEM) were used to examine the current in a 12 minute time segment and morphology along with fibers diameters respectively. The experiments showed that the electric current has a direct relation with concentration and electric voltage. However، it has an indirect relation with distance between a collector and needle tip. Flow rate did not illustrate any specific trend during the experiments. It has been observed that، electric current in a 12 minute time segment was unstable all through the experiments، while when tested with the optimized sample، the electric current was steady and stable.
    Keywords: Electrospinning, Nanofiber diameter, Electric Current
  • S.M. Hejazi, S.M. Abtahi, R. Alipour, M. Sheikhzadeh Pages 31-34
    HejaziBitumen is considered as a primary element of Asphalt Concrete (AC) mixture. Although، the percentage of this material in AC is low، the mechanical properties of AC mixtures will depend on it. Mainly، the temperature-dependence of bitumen leads to rutting on AC pavements in hot seasons، while results in thermal cracking in cold seasons. That is why the reinforcement of bitumen can be considered as an important concept. So، this paper is going to investigate some physical and mechanical properties of bitumen reinforced by different fibers including Poly Propylene، Polyester، Nylon 6٫6 and Glass. The mechanical property embraces ductility while the physicalcases comprise penetration and softening point. But only، the results of ductility tests have been presented in this paper and analyzed by using composite mechanics. On the basis of experimental results، it was illustrated that the attendance of fibers in bitumen decreases the ductility.
    Keywords: bitumen, Reinforcement, Fibers, Ductility
  • K. Gharanjig, M. Dodangeh, S. Valikhani Pages 35-38
    In this research، synthesis of a disperse dye based on thiazol derivatives and investigation of its dyeing properties on polyester fibres has been reported. For this purpose، 2-amino-6-nithrobenzothiazol was diazotized and coupled with 3-N،N-diethylamino acetanilide in acidic media. The synthesized dye was purified by TLC method and characterized by analytical instruments such as FTIR، 1HNMR، DSC and UV-Vis techniques. The spectrophotometric and antibacterial properties of obtained dye were examined. Results showed that the synthesized dye has antimicrobial property against both staphyloccus and Escherichia coli. Dispersion of the synthesized dye was prepared and utilized on polyester fibres and finally its dyeing properties were estimated. Results showed that the synthesized dye besides having good leveling and build-up on polyester fibres، had excellent wash، rubbing، perspiration fastness and medium light، sublimation fastness on this fibres.
    Keywords: Disperse dyes, Synthesis, Dyeing, polyester, Sublimation fastness
  • D. Semnani, S. Ajeli, E. Amir Nasr Pages 39-42

    The role played by the industrial warp knitted fabrics has become very important in recent years in industry، agriculture، medicine، etc. This matter is due to the superior properties of these kinds of fabrics، including their low weight، suitable elasticity، constant dimension، high durability، resistance to corrosion and degradation and their low costs. In the analysis of mechanical behavior of textile problems because of complexity of the fibrous products in terms of geometrical and mechanical properties a numerical techniques are used. In the present research، one of the most important mechanical properties of net warp knitted fabrics has been considered. FEM (finite element method) is used for modeling of tensional distribution of vertical drape in this field of fabrics.

    Keywords: Net warp knitted fabrics, finite element method, Laid in, Vertical drape