فهرست مطالب

علوم و فناوری نساجی - سال پنجم شماره 4 (زمستان 1394)

فصلنامه علوم و فناوری نساجی
سال پنجم شماره 4 (زمستان 1394)

  • تاریخ انتشار: 1396/01/25
  • تعداد عناوین: 6
|
  • طاهره زارع زاده، پدرام پیوندی صفحه 3
    در عصر حاضر، با توسعه روزافزون فناوری های رقمی و کاربرد آن در ارتقا و تسریع روند تولیدات هنری و نیز کاهش بهر هوری روش های سنتی، کاربرد رایانه در طراحی لباس جایگاه ویژه ای یافته است. در این پژوهش، سامانه طراحی سه بعدی لباس با استفاده از الگوریتم ژنتیک محاور های و خوشه بندی k-means ارائه شده است. با استفاده از نرم افزار طراحی لباس، اجزای لباس شنای زنانه شامل بالاتنه، میان تنه و پایین تنه، جداگانه طراحی شده و به شکل سه بعدی ذخیره می شود. طرح های اجزای لباس و طرح های پارچه به کاربر ارائه می شود و کاربر با انتخاب طرح های مورد علاقه خود، بانک اطلاعاتی را می سازد. با استفاده از الگوریتم ژنتیک طرح های لباس ایجاد می شود. طرح های لباس روی آدمک قرار گرفته و با چرخش آدمک، تمام بخش های لباس برای کاربر قابل دید است. در سامانه ارائه شده برای کاهش خستگی کاربر، با استفاده از روش خوشه بندی k-means کل جمعیت به هشت خوشه تقسیم می شود. کاربر فقط نماینده هر خوشه را ارزیابی می کند و برازندگی سایر اعضا براساس مقدار شباهت و برازندگی نماینده هر خوشه که توسط کاربر معین شده، محاسبه می شود. نتایج نشان می دهد، میزان رضایت از این سامانه زیاد است و می تواند باعث تسهیل طراحی و ارتقای سطح آن و کمک به طراحان شود.
    کلیدواژگان: طراحی سه بعدی لباس، خستگی کاربر، الگوریتم ژنتیک محاوره ای، روش k، means
  • صابره گلاب زایی، رامین خواجوی، لیلا ترکیان صفحه 17
    در این پژوهش، اثر پوشش نانو طلا و شکل شماسی نانوذرات تیتانیوم دی اکسید (TiO2) بر افزایش بهره‏وری خاصیت نور کاتالیزوری و خود‏تمیز‏شوندگی روی بستری سلولزی بررسی شده است. پارچه های ویسکوزی با نانو ذرات طلا به روش پاششی در زمانهای متفاوت (از s30 تا min 4) پوشش دهی شدند. سه مورفولوژی متفاوت از نانوذرات TiO2 به شکلهای کروی، دوکی و میله ای با روش افشانه ای بر روی بسترهای خام و با پوشش طلا اعمال گردیدند. مرفولوژی نمونه ها با میکروسکوپ الکترونی روبشی و قدرت خود تمیز شوندگی با اندازه گیری شاخص های قدرت رنگ و اختلاف رنگ(ΔE) انجام پذیرفت. نتایج نشان داد که وجود پوشش طلا بعلت تمایل به جذب الکترون های نانو ذراتTiO2 برانگیخته، باعث ارتقای خاصیت فتوکاتالیزوری میگردد، اما ضخامت پوشش روی بستر تغییر معنا‏داری در افزایش راندمان خاصیت فوتوکاتالیزوری نشان نداد. نانوذرات TiO2 میله ای شکل نسبت به کروی و دوکی شکل خاصیت خودتمیزشوندگی بیشتری را نشان میدهند که میتواند مربوط به سطح مخصوص بالاتر آنها در مقایسه با دو نوع دیگر باشد.
    کلیدواژگان: خود تمیزشوندگی، شکل شناسی نانو ذرات، پارچه سلولزی، نانو پوشش طلا، نانوذرات TiO2
  • محمد خواجه مهریزی، سمیه زحمتکش صفحه 25
    رنگها از پرمصرف ترین مواد شیمیایی در صنایع مختلف بوده که همواره بخشی از آن وارد طبیعت میگردد. بنابراین، حذف این آالاینده های آلی به روش هایی که برای محیط زیست مضر نباشد مهم است. در این تحقیق رنگبری فتوکاتالیستی رنگینه مستقیم قرمز 23 (DR23) با ساختار دی آزو، در حضور دی اکسید تیتانیوم همراه با افزودن بتا سیکلو دکسترین تحت تابش نور ماوراء بنفش مطالعه شد. عوامل موثر مانند pH ، حضور نمک و غلظت رنگینه مورد بررسی قرار گرفت. مقایسه نتایج حاصل از متغیرهای مختلف نشان داد که بالاترین راندمان رنگبری در pH اسیدی و غلظت پایین رنگینه، به دست خواهد آمد. افزایش مقدار نمک سدیم کلراید از 5 به 20 گرم بر لیتر رنگبری رنگینه DR23 را تسریع بخشیده و به حذف کامل رنگ کمک می کند. در این فرایند، بتا سیکلو دکسترین به عنوان جاذب عمل می کند. همچنین، نتایج نشان می دهد که رنگبری از طریق بتاسیکلو دکسترین در حضور دی اکسید تیتانیوم و تابش نور ماوراء بنفش باعث کاهش همه جامدات محلول در آب (TDS) می شود. علاوه بر این، نتایج ضریب همبستگی آزمایشات نشان داد که داده های به دست آمده برای این رنگزای مستقیم با مدل ایزوترم جذب لانگ میور مطابقت خوبی دارد.
    کلیدواژگان: رنگبری، رنگینه مستقیم، بتا سیکلودکسترین، نور ماوراء بنفش، دی اکسید تیتانیوم
  • وحید محمدی، پیمان ولی پور، حامد محمدی صفحه 31
    هدف اصلی در پژوهش حاضر، شناسایی عوامل موثر بر توان رقابتی خوشه های صنعت نساجی است. جامعه آماری را مدیران واحدهای صنعتی فعال در شهرک های صنعتی استان مازندران به تعداد 135 نفر تشکیل می دهند. جهت نمونه گیری از روش نمونه گیری تصادفی طبقه ای استفاده شده است. چارچوب نظری، بر اساس الگوی رقابتی پورتر(1990) استوار می باشد. الگوی پورتر به عنوان یک الگو پایه و بنیادی در تحلیل رقابت پذیری یک صنعت، نشان می دهد رقابت در سطح صنعتی معین شامل چه عواملی است. محققان در پژوهش حاضر به منظور شناسایی عوامل موثر بر توان رقابتی خوشه های صنعت نساجی علاوه بر عوامل الگوی پورتر، عامل فرهنگ سازمانی کارآفرینانه را به چارچوب نظری تحقیق افزوده اند. لازم به ذکر است که عامل شانس از الگوی مایکل پورتر در تحقیق حاضر در نظر گرفته نشده است. نتایج تحقیق نشان می دهد عوامل ششگانه الگوی پورتر شامل شرایط عوامل تولید، شرایط تقاضا، استراتژی و رقابت، صنایع حمایتی و مرتبط، نقش دولت و همچنین عامل فرهنگ کارآفرینانه بر افزایش توان رقابت پذیری واحدهای تولیدی صنعت نساجی تاثیر معنی داری دارد.
    کلیدواژگان: خوشه های صنعتی، صنعت نساجی، مزیت رقابتی، الگوی پورتر
  • پدرام پیوندی، وجیهه مظفری شمسی صفحه 43
    شبیه سازی سه بعدی پارچه از موضوعات مورد توجه در مهندسی نساجی است. از مهم ترین کاربر دهای شبیه سازی پارچه در نرم افزارهای طراحی پارچه است. در این نرم افزارها به کاربر اجازه داده می شود، شکل و افتایش پارچه روی بدن یا هر سطح خارجی را مشاهده کند. همچنین، اثر تغییر پارامترهای پارچه روی ظاهر افتایش پارچه را نیز مشاهده کند. این امکان مشاهده نحوه افتایش لباس پیش از پوشش توسط مصرف کننده، باعث کاهش هزینه ها و افزایش رضایتمندی مصرف کنندگان می شود. همچنین به تولیدکنندگان پوشاک در تامین نیاز مصرف کنندگان کمک قابل توجهی می کند. بنابراین در طول سه دهه گذشته، برای شبیه سازی پارچه روش های متنوعی توسط پژوهشگران ارائه شده است. امروزه به طور کلی می توان این روش ها را به سه گروه هندسی، فیزیکی و ترکیبی دسته بندی کرد.
    از میان این روش ها، شبیه سازی براساس مدل فیزیکی جرم و فنر بیشتر مورد توجه پژوهشگران قرار گرفته است. این روش، سریع و انعطاف پذیراست و کارایی زیادی دارد. در این مقاله، پژوهش های انجام شده در زمینه مدل سازی پارچه با سامانه جرم و فنر مرور شده است. همچنین، انواع مش بندی های ارائه شده در این روش مدلسازی، نیروهای وارد بر مدل، اثر ابرکشسانی و روش های آن، روش های انتگرال گیری عددی برای حل معادلات، مسئله آشکارسازی و پاسخ برخورد تحلیل شده است. در نهایت، نمونه هایی از مثال های تجربی ارائه شده توسط پژوهشگران در زمینه شبیه سازی پارچه بیان شده است.
    کلیدواژگان: شبیه سازی، پارچه، مدل جرم و فنر، مدل فیزیکی، مدل سه بعدی
  • سحر جعفری، داود صادقی، مریم یوسف زاده، عاطفه سلوک صفحه 67
    تقاضای روزافزونی برای پیوند های عروقی مهندسی بافت شده با اثر بخشی طولانی مدت جهت جایگزینی یا بای پس عروق آسیب دیده در بیماری های مختلف قلبی و عروقی وجود دارد. عروق مهندسی بافت شده ایده آل باید زیست سازگار، خون سازگار، و مقاوم در برابر اتساع آنوریسم بوده و همچنین به آسانی قابل کاشت در بدن باشند. حوزه ی مهندسی بافت عروق فرصتی را برای طراحی و ساخت پیوندهای مصنوعی ایده ال فراهم می کند و تاکنون محققان این عرصه، انواع روش ها و مواد را به این منظور مورد مطالعه قرار داده اند. از جمله تحقیقات انجام شده می توان به ساخت داربست هایی از جنس بافت طبیعی سلول-زدایی شده یا بیوپلیمرها و پلیمرهای مصنوعی زیست تخریب پذیر برای ساخت پیوند های عروقی مهندسی بافت شده اشاره نمود. با این حال، هنوز چالش هایی نظیر عدم توانایی داربست ها در تقلید خواص مکانیکی بافت طبیعی و توانایی باز بودن طولانی مدت و همچنین رشد کافی بافت جدید درون داربست ها جهت تضمین عملکرد مناسب در داخل بدن، پیش روی محققان است. الکتروریسی، روشی متداول برای تولید داربست های مهندسی بافت است که پتانسیل مناسبی برای حل این مشکلات دارد. در این مقاله مروری، مطالعات انجام شده بر روی ساخت داربست های عروقی الکتروریسی شده بررسی خواهند شد.
    کلیدواژگان: پیوند عروقی، مهندسی بافت، الکتروریسی، داربست های لوله ای
|
  • Tahereh Zarezade, Pedram Payvandy Page 3
    Today, with increasing development of digital technologies and their use to promote and accelerate artistic production trends as well as decrease the utilization of traditional methods, the use of computers has had a special place in fashion design. In this study, 3D garment design systems using interactive genetic algorithms and k-means clustering is proposed. Using the software 3D garment design, components swimsuit includes top style, waist and bottom style, and individually designed in three dimensions has been saved. Component design 3D garment and fabric designs presented to the user and the user has selected their favorite designs, builds database. 3D Garment designs are created using genetic algorithms. Designs garment on the dummy. The dummy rotation, all parts of the clothing is user-intuition. In the proposed system to reduce fatigue, using k-means clustering the total population is divided to 8 clusters. The user only representative of each cluster evaluate and fitness of other members based on the similarities and fitness each cluster representative determinate by the user is calculated. The results show that a highly capable system which facilitates model design productions to the ultimate satisfaction of the designer.
    Keywords: 3D garment designing, User fatige, intractive genetic algorithm, k-means method
  • Sabereh Golabzaei, Ramin Khajavi, Leyla Torkiyan Page 17
    In this study, the effect of Au Nano coating and the morphology of titanium dioxide "TiO2" nano particles to improvement of performance of photo-catalytic and self-cleaning properties on the cellulosic substrate was investigated. Au nanoparticles with sputtering method in different times were coated on a viscose fabric. Three different kinds of TiO2 morphologies including spherical, spindle and rod shaped were applied on samples by spraying method. Morphology of samples was characterized by scanning electron microscopy and the self-cleaning properties determined by color intensity and color difference (ΔE). Results showed that Au coating according to its tendency for absorbing excited TiO2 electrons increased the photocatalytic ability. But, its thickness showed no significant improvement in the obtained self cleaning property. The rod shaped TiO2 nanoparticles showed better results in compare with spherical and spindle shaped nanoparticles which can be attributed to its higher surface area in compare with the other two nanoparticles.
    Keywords: Self-cleaning, Nanoparticle morphology, Cellulosic fabric, Au Nano coating, TiO2 nanoparticles
  • Mohammad Khajeh Mehrizi, Somaye Zahmatkesh Page 25
    Colors are the most extensively consumed chemicals in different industries which always some dyes enter in nature. So, removals of organic pollutants in ways that are not dangerous to the environment are important. In this search, photo catalytic decoloration of Direct Red 23 (DR23) under UV/TiO2/β-Cyclodextrin process was studied. Effective factors such as pH, the presence of salt, temperature and concentration of the dye was evaluated. Comparing the results of these parameters showed the highest efficiency of decoloration will be achieved in acidic pH and low concentrations of dye. Adding sodium chloride salt from 5 to 20 g/l accelerates decoloration process of DR23 solution and helps to full removal dye. In this process, β-cyclodextrin acts as an absorbent. Also, the results indicate that decoloration of dye under UV/TiO2/β-Cyclodextrin procedure reduce the TDS solution. Moreover, the results of correlation coefficient of experiments indicated that the dye adsorption of the direct dye was correlated reasonably well by Langmuir isotherm.
    Keywords: Decoloration, Direct dye, β-Cyclodextrin, UV light, TiO2
  • Vahid Mohammadi, Peyman Valipour, Hamed Mohammadi Page 31
    The main objective of this study is to identify factors affecting the competitiveness ability of the textile industry clusters. The framework of the study is based on Porter’s (1990) competitive model. Porter’s model, as a basic model for analyzing the competitiveness of an industry, shows the factors included in competition within a given industry. In order to identify the factors affecting the competitiveness ability of textile industry clusters, the researchers considered the additional factor “entrepreneurial organizational culture” along with Porter’s model in presenting the theoretical framework of this research. It should be noted that the factor “chance” in Porter’s model is excluded from this study. Results of the study show that the six factors of Porter’s model, including factor conditions, demand conditions, firm strategy, structure and rivalry, related and supporting industries, and the role of government as well as entrepreneurial organizational culture have significant influence on increasing the competitiveness ability of the culture of textile industry units.
    Keywords: Industrial clusters, Textile industry, Competitiveness advantage, Porter model
  • Pedram Payvandy, Vajiha Mozafary Shamsi Page 43
    The 3D simulation of fabrics is one of the interesting topics in textile engineering. The fabric simulation is especially important in the cloth design software. This design software can be used to visualize the fabric drape on the body or other surfaces by changing the fabric parameters. Therefore, it saves time and money and increases the customer satisfaction by preventing the production of garments that will not be sold. In the past three decades, many methods have been suggested by researchers for fabric modeling. Nowadays, these methods can be roughly divided into three classes: geometrically-based, physically-based and hybrid methods. Mass spring model, the physically-based method, is one of the methods for fabric simulation which is widely considered by the researchers.
    This method is a fast and flexible technique with computational efficiency. The aim of this paper is to survey the published results on fabric simulation using mass spring model. The paper reviews the presented mesh types, forces applied on model, super elastic effect and ways to settle the super elasticity problem, numerical integration methods for solving equations, collision detection and its response. Some of the fabric simulation examples
    presented by the researchers are also presented.
    Keywords: Simulation, Fabric, Mass-Spring model, Physical model, 3D model
  • Sahar Jafari, Davoud Sadeghi, Maryam Yousefzadeh, Atefeh Solouk Page 67
    There is an increasing demand for tissue engineered vascular grafts (TEVGs) with long-term effectiveness in order to replace or bypass the diseased vessels. Ideal TEVGs should be biocompatible, blood-compatible and have resistance against aneurysm dilation as well as being easily implantable in body. Tissue engineering field provides an opportunity for designing and fabrication of ideal synthetic grafts, and so far, researchers have studies several materials and methods for this aim. For example, some TEVGs have been made from decellularized natural tissues, biopolymers and biodegradable synthetic polymers. However, the researchers still encounter with some challenges including true mimicking the mechanical properties of natural tissues and enough neo-tissue ingrowth. Electrospinning is a conventional techniques that has a great potential to solve these problems. In this paper, the performed studies on fabrication of electrospun vascular scaffolds have been reviewed.
    The English abstract is translate of the Persian one. But, unfortunately, it has not 150 words, while the Persian abstract has 180 words.
    Keywords: Vascular grafts, tissue engineering, electrospinning, tubular scaffolds