فهرست مطالب

نشریه مهندسی بهداشت محیط
سال دوم شماره 3 (پیاپی 7، بهار 1394)

  • تاریخ انتشار: 1394/03/25
  • تعداد عناوین: 8
|
  • مهدی ابراهیمی، مهرداد فرخی، کامران تقوی، مهدی شیرزاد سیبنی صفحات 166-176
    زمینه و هدف
    فعالیت های انسانی اغلب فلزات سنگین را در سراسر محیط زیست پراکنده می کند که خطراتی برای سلامتی انسان هنگامی که غلظت این فلزات به سطوح بالا می رسد دربر دارد. هدف از انجام این تحقیق ارزیابی تاثیر نانو ذره اکسید آلومینیوم در حذف کادمیوم از محیط آبی می باشد.
    مواد و روش ها
    مطالعه مورد نظر یک مطالعه بنیادی–کاربردی است که هدف آن بررسی حذف کادمیوم با استفاده از نانو اکسید آلومینیوم گاما که بصورت تجاری تهیه شده می باشد. تاثیر متغیرهایpH ، غلظت نانو اکسید آلومینیوم، غلظت اولیه کادمیوم، زمان تماس، بر روی سینتیک و ایزوترم جذب کادمیوم بوسیله نانو اکسید آلومینیوم گاما مطالعه شد.
    یافته ها
    نتایج حاصل از آزمایشات نشان می دهد که یون کادمیوم در 3pH= بیشترین جذب را بر روی نانو اکسید آلومینیوم داشت. همچنین با افزایش مقدار جاذب، راندمان جذب افزایش یافت به طوری که با افزایش نانو اکسید آلومینیوم از 5/0گرم به 4 گرم، راندمان جذب به 33% رسید. با افزایش میزان غلطت اولیه کادمیوم از 5 میلی گرم به 10 میلی گرم، کارایی حذف نیز از %29 به %25 کاهش یافت. به هر حال بهترین زمان جذب 60 دقیقه به دست آمد و زمان ماند بیش از این، تاثیر چندانی در کارایی حذف نداشت. داده های مربوط به آزمایشات ایزوترمی نانو اکسید آلومینیوم مطابقت بیشتری با مدل ایزوترمی فروندلیچ ( 9998/0=2 R) دارند. نتایج حاصل از سینتیک جذب کادمیوم نشان داد که نانو اکسید آلومینیوم، از مدل سینتیکی درجه دوم (9879/0 =2 R) پیروی کرده است.
    نتیجه گیری
    نانو اکسید آلومینیوم گاما می تواند به عنوان یک جاذب در حذف کادمیوم از محیطهای آبی معرفی شود.
    کلیدواژگان: جذب سطحی، کادمیوم، نانو اکسید آلومینیوم
  • مهدی فرزادکیا، حسین آذری، احسان احمدی، بابک کاکاوندی، عماد دهقانی فرد، شهرام نظری صفحات 177-185
    زمینه و هدف
    عدم مدیریت صحیح، افزایش تولید پسماند و دفع غیر اصولی آن علاوه بر هدر دادن سرمایه ملی، موجب نابودی منابع طبیعی نیز می شود. برای رفع این مشکل نیازمند یک برنامه مدیریتی منسجم و پویا هستیم تا از خسارات احتمالی جلوگیری به عمل آوریم. هدف از اجرای این طرح کاهش آلودگی محیطی، ارتقاء مشارکت شهروندان، درآمد زایی و کاهش اتلاف زمین می باشد.
    مواد و روش ها
    در این مطالعه از چک لیست ها و مشاهده میدانی در بازه زمانی 1 ساله برای جمع آوری اطلاعات استفاده شد. چک لیست های تهیه شده دارای 33 سوال می باشد که بر اساس استاندادهای ایران تهیه شده است. برای تعیین اجزای تشکیل دهنده پسماند نیز از روش نمونه برداری استفاده شده است، اطلاعات مربوط به نمونه برداری ها وارد نرم افزار Excel گردیده و مورد تجزیه و تحلیل قرارگرفتند.
    یافته ها
    متوسط سرانه تولید پسماند در ابتدای طرح g/day 580 بوده و در انتهای طرح بهg/day 660 می رسد. میزان مواد موجود در پسماند شامل مواد فساد پذیر 8/66 %، کاغذ و مقوا 3/4 %، پلاستیک2/7 %، شیشه3/2 %، منسوجات2 %، فلزات 2/0 %، چوب 6/1 % تعیین شد و همچنین میزان پسماندهای بیمارستان برابر4400 کیلوگرم می باشد. طبق برآورد های انجام شده هزینه سرانه خدمات مدیریت پسماند به ازاء هر نفر در قم سالانه 70 ریال و هزینه جمع آوری، انتقال، تفکیک و دفن هر کیلوگرم پسماند نیز روزانه 280 ریال برآورد شد.
    نتیجه گیری
    مقدار سرانه پسماند قم از شهرهای تهران، دلیجان و ملایر کمتر و نسبت به شهر های اصفهان و کاشان بیشتر می باشد. پسماندهای بیمارستانی نیز نسبت به میانگین ایران در حد مطلوبی قرار دارد.
    کلیدواژگان: مدیریت پسماند، آنالیز کمی وکیفی، مواد زاید جامد، شهر قم
  • علیرضا رایگان شیرازی نژاد، مرتضی زارع، فهیمه زارع، محمد مهدی بانشی، سهیلا رضایی صفحات 186-194
    زمینه و هدف
    تصفیه فاضلاب شامل فرآیندهای فیزیکی، شیمیایی و بیولوژیکی بسیار پیچیده و وابسته به هم می باشد، با استفاده از روش های داده کاوی می توان با دقت زیاد و بوسیله مدل های بدون محاسبات پیچیده ریاضی فرآیندهای تصفیه فاضلاب را مدلسازی کرد.
    مواد و روش ها
    در این پژوهش از داده های مربوط به فرآیندهای تصفیه فاضلاب موجود در شرکت آب و فاضلاب استان کهگیلویه و بویر احمد استفاده گردید. در مجموع 3306 داده مربوط به COD، TSS، PHو کدورت جمع آوری گردید. در نهایت داده های گردآوری شده با استفاده از نرم افزار های تحلیل آماری SPSS-16 (آمارتوصیفی) و داده کاوی Ibm Spss Modeler 14.2 و از طریق 9 الگوریتم مورد تجزیه و تحلیل قرار گرفتند.
    نتایج
    با توجه به نتایج بدست آمده بر روی الگوریتم های رگرسیون لجستیکی، شبکه عصبی، شبکه بیزی، تحلیل تفکیکی، درخت تصمیم C5، درخت C&R ، CHAID، QUESTو SVM به ترتیب دارای درصد دقت درستی 16/90، 17/94 ، 37/81 ، 48/70 ، 89/97 ، 56/96 ، 46/96 ، 84/96 ، 92/88 بودند.
    بحث و
    نتیجه گیری
    در این مطالعه، الگوریتم C5 به عنوان بهترین و کارآمدترین الگوریتم در جهت مدلسازی فرآیندهای تصفیه فاضلاب با دقت 899/97 درصد انتخاب گردید و موثرترین متغیر ها در این مدل به ترتیب PH، COD، TSS و کدورت بودند.
    کلیدواژگان: مدلسازی فرآیند تصفیه فاضلاب، داده کاوی، دسته بندی، کهگیلویه و بویر احمد
  • علیرضا رحمانی، محمدتقی صمدی، رضا شکوهی، حسن ذوالقدرنسب صفحات 187-197
    مقدمه و هدف
    ثبات و پایداری ترکیبات مصنوعی نوظهوری همچون دی متیل فتالات موجب افزایش روزافزون غلظت آنها در محیط زیست و چرخه مواد غذایی و ایجاد مخاطرات بهداشتی شده است. بنابراین دستیابی به روش های موثر و کارآمد جهت حذف این آلاینده ها از دغدغه های محققین محیط زیست می باشد. این پژوهش با هدف بررسی کارایی فرآیند فنتون هتروژن با نانوذرات آهن صفر در حذف دی متیل فتالات از محیط های آبی انجام شده است.
    مواد و روش ها
    مطالعه تجربی حاضر در مقیاس آزمایشگاهی، در راکتور با جریان منقطع انجام شد و کارایی فرآیند فنتون هتروژن با بررسی تاثیرتغییرات پارامترهای عملیاتی زمان واکنش (5 تا 120 دقیقه)، pH (2 تا10)، غلظت پراکسید هیدروژن (01/0 تا 1 میلی مول بر لیتر)، میزان نانوذرات آهن صفر (01/0 تا 5/0 گرم بر لیتر) و غلظت اولیه دی متیل فتالات (2 تا 50 میلی گرم بر لیتر) مورد مطالعه قرار گرفت. سپس تاثیر هر یک از عوامل فنتون هتروژن در حذف دی متیل فتالات تعیین شد.
    یافته ها
    نتایج حاصل نشان داد بیشترین کارایی فرآیند فنتون هتروژن در حذف دی متیل فتالات در 4pH= می باشد. همچنین در شرایط بهینه پارامترهای موثر بر واکنش شامل غلظت پراکسید هیدروژن 1/0 میلی مول بر لیتر، مقدار نانوذرات آهن صفر 05/0 گرم بر لیتر، غلظت اولیه 2 میلی گرم بر لیتر آلاینده و زمان تماس 60 دقیقه، میزان حذف دی متیل فتالات برابر 8/92 درصد تعیین شد.
    نتیجه گیری
    براساس نتایج حاصل شده، فرآیند فنتون هتروژن با نانوذرات آهن صفر، کارایی مطلوبی در حذف دی متیل فتالات از محیط های آبی دارد و می تواند به عنوان یک روش موثر و کم هزینه در حذف ترکیبات مشابه مد نظر قرار گیرد.
    کلیدواژگان: دی متیل فتالات، فنتون هتروژن، نانوذرات آهن صفر، محیط های آبی
  • مهدی سالاری، فضل الله چنگانی، محمد درویش متولی، سعید اکبری صفحات 198-210
    زمینه و هدف
    2و4 دی کلروفنل (DCP) یکی از ترکیبات بسیار سمی کلروفنل ها می باشد که در مناطق کشاورزی، آب ضدعفونی شده توسط کلر، فاضلاب خروجی صنایع خمیر کاغذ و کارخانه های کاغذ دیده می شود. کلروفنل ها باعث آسیب بر روی کلیه ها، کبد، پانکراس و تضعیف سیستم اعصاب مرکزی می شود. در این مطالعه به بررسی جذب DCP توسط کیتوزان در محیط های آبی خواهیم پرداخت.
    روش بررسی
    در این مطالعه پارامترهای زمان جذب (min100- 15)، pH (9-3)، غلظت های اولیهDCP (mg/l100- 15) و دوز جاذب کیتوزان (g9/0-1/0) در راکتور ناپیوسته مورد بررسی قرار گرفت و برای سنجش غلظت DCP از دستگاه اسپکتروفتومتری در طول موج nm280 استفاده گردید. با استفاده از نتایج بدست آمده در فرآیند جذب، مدل های ایزوترمی فروندلیخ، لانگمویر و مدل های سینتیکی شبه درجه اول و دوم بررسی شد.
    یافته ها
    زمان تعادل در فرآیند جذب 75 دقیقه (5/6=pH، mg/l15- غلظتDCP و g5/0- غلظت کیتوزان) با 76% حذف بدست آمد. 3=pH بعنوان pH بهینه در فرآیند جذب (mg/l15- غلظتDCP، g5/0- غلظت کیتوزان و min75- زمان تعادل) با راندمان 79% بدست آمد و با افزایش pH راندمان کاهش یافت. درغلظت mg/l15 از DCP (3=pH، g 5/0- غلظت کیتوزان و min75- زمان تعادل) بیشترین حذف با راندمان 79% مشاهده گردید و دوز g8/0جاذب کیتوزان (3= pH، mg/l15- غلظت DCP و min75- زمان تعادل) با راندمان 87% بیشترین حذف DCP را بهمراه داشت. فرآیند جذب از ایزوترم فروندلیخ با ضریب همبستگی 9599/0 و از مدل سینتیکی شبه درجه دوم با ضریب همبستگی 9649/ 0پیروی می کند.
    نتیجه گیری
    با استناد به نتایج مطالعه انجام شده، می توان از کیتوزان بدلیل ویژگی هایی از جمله تجزیه پذیری، قابلیت احیا مجدد، ارزان قیمت بودن و راندمان قابل قبول در جذب، برای حذف DCP از فاضلاب صنایع استفاده نمود.
    کلیدواژگان: 2و4 دی کلروفنل، کیتوزان، فاضلاب صنایع، فرآیند جذب
  • مهدی فرزادکیا، سودا فلاح جوکندان، مجتبی یگانه بادی صفحات 211-223
    زمینه و هدف
    بنا به گزارش سازمان خواروبار جهانی، بین 33 تا 60 درصد افزایش تولیدات کشاورزی در جهان مرهون مصرف کود های شیمیایی بوده است. اثرات منفی کود های شیمیایی بر محیط زیست و سلامت موجودات زنده به ویژه انسان، کشور را با چالش هایی نظیر افزایش آمار سرطان مواجه کرده است. بنابراین جایگزینی کود های شیمیایی با کمپوست ضروری می باشد. کمپوست باعث افزایش بازدهی محصول و کنترل فرسایش خاک می گردد.
    مواد و روش ها
    به منظور دستیابی به اهداف تحقیق، مطالعات کتابخانه ای انجام شد و جهت بررسی وضعیت کود های شیمیایی و کمپوست در ایران و کشور های پیشرفته جهان، مطالبی از طریق پایگاه های معتبر داخلی و خارجی جمع آوری گردید.
    یافته ها
    پیش بینی می شود مصرف کود های شیمیایی در اروپا تا سال 2030 تا 16 میلیون تن کاهش یابد. درحالی که طبق پیش بینی ها در ایران تا سال 2020 به 6700 هزار تن افزایش می یابد. کل عرضه کمپوست در کشور در سال 88، 164 هزار تن و تا سال 95 به 590 هزار تن و کل تقاضا در کشور در سال 88، 472 هزار تن و تا سال 95،661 هزار تن خواهد بود. این امر نشان می دهد که 71 هزار تن کمبود در عرضه کمپوست تا سال 95 وجود دارد.
    نتیجه گیری
    استفاده بیشتر کمپوست در کشور منوط به مدیریت چند وجهی این موضوع دارد که باید وزارت خانه ها، شهرداری ها و سازمان بازیافت با هم همکاری لازم را داشته باشند. با دادن آگاهی های لازم در رابطه با اثرات سوء مصرف بی رویه کود های شیمیایی و همچنین ترویج مصرف کود کمپوست علاوه بر کاهش مصرف کود شیمیایی، موجب تقاضای بیشتر برای مصرف کود کمپوست خواهد شد.
    کلیدواژگان: کمپوست، کود شیمیایی، مدیریت پسماند، ایران
  • داود بلارک، ادریس بذرافشان، فردوس کرد مصطفی پور صفحات 224-237
    زمینه و هدف
    تخلیه پساب صنایع حاوی سرب به داخل محیط می تواند اثرات مضری را برای انواع موجودات زنده به همراه داشته باشد، بنابراین سرب باید با یک روش موثر قبل از تخلیه به محیط از آب های آلوده حذف گردد. هدف از این مطالعه، بررسی حذف سرب با استفاده از بیومس آزولا بوده است.
    روش بررسی
    در این مطالعه تجربی، حذف سرب با استفاده از بیومس آزولا، با تغییر در زمان تماس،pH ، دوز جاذب، غلظت اولیه سرب و سرعت اختلاط انجام گردید. آزمایش ها به صورت ناپیوسته در فلاکس هایی بر روی شیکر انجام گرفت. برای سنجش غلظت باقیمانده سرب از دستگاه جذب اتمی استفاده شد. آزمایشات به صورت سه بار تکرار و میانگین درصد حذف ارائه شد. در نهایت، سینتیک جذب و ایزوترم های تعادلی ماده جاذب مورد بررسی قرار گرفت.
    یافته ها
    بیشترین میزان حذف سرب در pH برابر با 6 و دوز بهینه جاذب 7 گرم در لیتر به دست آمد. با افزایش غلظت اولیه سرب، راندمان حذف کاهش می یابد و با افزایش زمان تماس و سرعت اختلاط، راندمان افزایش می یابد. نتایج نشان داد که داده های حاصل، از ایزوترم جذب لانگمیر و سینتیک درجه دو کاذب تبعیت می کند.
    نتیجه گیری
    بیومس آزولا، یک جاذب کارآمد و کم هزینه برای حذف سرب از آب و فاضلاب است.
    کلیدواژگان: فاضلاب سینتیک، ایزوترم جذب، سرب، بیومس آزولا
  • مریم خدادادی، امیر حسین محوی، حسین وزینی، رسول خسروی، حدیقه دری، محمدحسین ساقی صفحات 238-248
    زمینه و هدف
    فلوراید و ترکیبات آن به شکل گسترده ای در صنایع مورد استفاده قرار می گیرد که از طریق پساب به محیط زیست منتشر می شود. .هدف از این تحقیق بررسی کارایی استفاده از جاذب های ارزان قیمت در حذف فلوراید از محیط های آبی حاوی فلوراید می باشد.
    روش کار
    پودر حاصل از پوست پسته را در داخل بوته چینی به درون کوره انتقال داده و به مدت 2 ساعت در دمای 500،600 و700 درجه سانتی گراد سوزانده می شود. اثر متغیر های pH، دمای سوزاندن جاذب، سرعت هم زدن، غلظت اولیه فلوئور، مدت زمان تماس و دوز جاذب مورد بررسی قرار گرفت.ا ندازه گیری غلظت اولیه فلوئور و غلظت باقیمانده بر اساس استاندارد متد و با کمک دستگاه اسپکتروفتومتری انجام گرفت و در نهایت تجزیه و تحلیل داده ها با استفاده از نرم افزار EXCEL صورت گرفت.
    یافته ها
    نتایج حاصل از این آزمایشات نشان داد که سوزاندن جاذب ها(زغال پوسته پسته) دردمای500 درجه سانتی گراد، تنظیم PH محلول در محدوده خنثی(pH=) ،دوز جاذب g/L2 برای جاذب بادام و دوز جاذب 3 گرم در لیتربرای جاذب پسته ، زمان تماس 40 دقیقه برای جاذب، غلظت اولیه فلوراید ppm5 راندمان حذفی به میزان 90-80 درصد را دارا می باشد.
    نتیجه گیری
    بر مبنای نتایج حاصل از این مطالعه می توان اظهار نمود که زغال پوست پسته و بادام یک روش کارآمد و با راندمان نسبتا بالا برای حذف فلوراید از محیط های آبی است.
    کلیدواژگان: زغال پوست پسته، فلوراید، محیط های آبی، جذب
|
  • Mehdi Ebrahimi, Mehrdad Farrokhi, Kamran Taghavi, Mehdi Shirzad Siboni Pages 166-176
    Background
    Human activities often diffuse heavy metal to the environment, which bring hazards up for human health when the concentration of these metals reaches high levels. The purpose of this study is evaluation effect of aluminum oxide Nano particles on cadmium removal from aquatic environment.
    Methods
    This is a fundamental applied study which has been performed in order to investigation cadmium removal by using gamma aluminum nano oxide commercially prepared. In present study effects of pH, nano aluminum oxide concentration, initial concentration of cadmium, and contact time on kinetics and adsorption isotherm of cadmium by gamma Nano aluminum oxide were studied.
    Results
    The results of experiments showed that cadmium ion had maximum adsorption over nano aluminum oxide on pH=3. Also by increasing adsorbent dose, adsorption efficiency was increased as by addition nano aluminum oxide from 0.5 g up to 4 g, the adsorption efficiency reached to 33%. By increasing cadmium initial concentration from 5 to 10 mg, removal efficiency was decreased from 29% to 25%. However the best time for adsorption was obtained at 60 minutes and the remaining time had no more effect on the removal efficiency. Data related to isotherm test for nano aluminum oxide has more conformity with Freundlich isotherm model (R2=0.9998). The results of cadmium adsorption kinetic showed that nano aluminum oxide has followed second order kinetic model (R2=0.9879).
    Conclusion
    Nano Gamma-aluminum oxide adsorbent can introduce as an adsorbent for removal of cadmium from aquatic environment.
    Keywords: Adsorption, Cadmium, Nano Aluminum Oxide, Al2O3
  • Mahdi Farzadkia, Hossein Azari, Ehsan Ahmadi, Babak Kakavandi, Emad Dehghanifard, Shahram Nazari Pages 177-185
    Background And Objectives
    Lack of proper management, increasing waste production and non-normative disposal of waste in addition to misspend the national capital, cause loss of precious natural resources. To address this problem we need a coherent and dynamic management program. The goal of this project is to reduce environmental pollution, cost saving, promoting citizen participation, revenue and reduce land loss.
    Methods
    In this study, check lists, interviews and field report were used to collect data at period of one year. To determine the waste components, sampling technique was used then sampling data was imported into Excel software and was analyzed.
    Results
    At the beginning of the project, the average per capita of generated waste was 580 g/day and at the end of the project will 660 g/day. The waste materials determined as %66.8 putrescible, %4.3 paper and cardboard, %7.2 plastic, %2.3 glass, %2 textiles, %0.2 metals, %1.6 wood, and also, hospital waste was equal to 4400 Kg. According to estimates made annual cost of solid waste management services per capita in Qom is 70 Rial and the cost of collection, transportation, separation and disposal of garbage for every Kilogram per day is 280 Rial.
    Conclusion
    Amount of waste per capita in Qom was less than of Tehran, Delijan and Mallayer cities, and more than Esfahan and Kashan cities. Hospital waste was desirable as compared to the average of Iran.
    Keywords: Waste Management, Qualitative, Quantitative Analysis, Solid Waste, Qom City
  • Alireza Raygan Shirazinezhad, Morteza Zare, Fahime Zare, Mohammad Mehdi Baneshi, Soheila Rezaei Pages 186-194
    Background
    Wastewater treatment includes very complex and interrelated physical, chemical and biological processes which using data analysis techniques can be rigorously modeled by a non-complex mathematical calculation models.
    Materials And Methods
    In this study, data on wastewater treatment processes from water and wastewater company of Kohgiluyeh and Boyer Ahmad were used. A total of 3306 data for COD, TSS, PH and turbidity were collected, then analyzed by SPSS-16 software (descriptive statistics) and data analysis IBM SPSS Modeler 14.2, through 9 algorithm.
    Results
    According to the results on logistic regression algorithms, neural networks, Bayesian networks, discriminant analysis, decision tree C5, tree C & R, CHAID, QUEST and SVM had accuracy precision of 90.16, 94.17, 81.37, 70.48, 97.89, 96.56, 96.46, 96.84 and 88.92, respectively.
    Discussion and
    Conclusion
    The C5 algorithm as the best and most applicable algorithms for modeling of wastewater treatment processes were chosen carefully with accuracy of 97.899 and the most influential variables in this model were PH, COD, TSS and turbidity.
    Keywords: Wastewater Treatment Process Modeling, Data Analyzing, Classification, Kohgiluyeh, Boyer Ahmad
  • Ali Reza Rahmani, Mohammad Taghi Samadi, Reza Shokoohi, Hassan Zolghadr Nasab Pages 187-197
    Background and
    Purpose
    Stability of new synthetic compounds such as Dimethyl phthalate increased their concentration in the environment and food chain and caused health risks. Therefore, achieve effective and efficient methods to removal of pollutants are one of the environmental researchers concern. This study investigates efficiency of heterognous Fenton process using nZVI in dimethylphthalate removal from aqueous solutions.
    Materials And Methods
    This experimental study was conducted in batch reactor in laboratory scale and the efficiency of heterognous Fenton process was analyzed in a batch system with the effect of changes in operating parameters such as reaction time (15 to 120 min), pH (2 to10), H2O2 concentration (0.01 to 1 mmol/L), nZVI dose (0.01 to 0.5 mg/L) and initial concentration of Dimethyl phthalate (2 – 50 mg /L). Then the effect of each heterogeneous Fenton regent in dimethyl phthalateremoval was determined.
    Results
    The results showed that the maximum efficiency of heterognous Fenton process in removal of Dimethyl phthalate is at pH=4. Also in optimal conditions, the parameters affecting reaction was determined as H2O2 concentration 0.1 mmol/L, nZVI dose 0.05 gr/L, Dimethyl phthalate concentration 2 mg/L and 120 minute, amount of Dimethyl phthalate removal was 92.8%.
    Conclusion
    According to the results, heterognous Fenton process using nZVI has an optimal efficiency in removal of Dimethyl phthalate from aquatic solutions and can be considered as an acceptable and low Cost method for the removal of similar compounds.
    Keywords: Dimethyl phthalate, Heterogeneous Fenton, Nanoscale zero, valent iron, Aqueous solutions
  • Mehdi Salari, Fazlollah Changani, Mohammad Darvish Motevali, Saeed Akbari Pages 198-210
    Background
    2¡4 dichlorophenol (DCP), one of the most chlorophenol compounds family with highly toxic effect, exists in agricultural areas, chlorinated waters, discharging wastewater of pulp industries and paper factories. Chlorophenols can cause damages to the kidneys, liver, pancreas and weaken the central nervous system (CNS). In the current study we would evaluate the adsorption of DCP by chitosan in aqueous environments.
    Materials And Methods
    In this study we evaluated the effect of operational parameters such as time (15-90min), pH values (3-9), initial concentration of DCP(15-100mg/l)and the dose of chitosan (0.1-0.9g) in a batch reactor. A spectrophotometer at wavelength of 280nm was used to measure the concentration of DCP. Freundlich and Langmuir isotherm models and Pseudo-first order kinetic models and Pseudo-second-order kinetic was drawn by using of the results obtained in the absorption process.
    Results
    Equilibrium time in the adsorbtion process was estimated to be 75 minutes (DCP Concentration- 15mg/l, Chitosan Concentration – 0.5g and pH- 6.5) with 76% removal efficiency. PH=3 was calculated as the optimal PH in absorption process (DCP Concentration- 15mg/l, Chitosan Concentration- 0.5g and Time Equilibrium-75 min) with efficiency 79% and the value of efficiency decreased by increasing PH. In 15 mg/l concentration of DCP maximum adsorption with an efficiency of 79% was observed. (Chitosan Concentration – 0.5g, Time Equilibrium -75 min and pH-3) and the maximum 87% adsorption efficiency of DCP was observed at the 0.08mg/l absorbent dose of chitosan. (DCP Concentration - 15mg/l, time equilibrium-75 min and pH=3). Adsorption process follows of Freundlich isotherm with correlation coefficient of 0.9599 and the pseudo second order kinetic model with correlation coefficient of 0.9649.
    Conclusion
    According to results of the study, chitosan can be used to remove of DCP from industrial wastewater due to of its perfect characteristics such as biodegradability, resurgent ability, low cost and adsorption acceptable efficiency.
    Keywords: 2, 4 dichlorophenol, Chitosan, Industrial Wastewater, Absorption process
  • Mahdi Farzadkia, Sevda Fallah Jokandan, Mojtaba Yegane Badi Pages 211-223
    Background
    According to report of the World Food and Agriculture Organization (FAO), between 33 to 60 percent increase in agricultural production in the world due to the use of chemical fertilizers. Negative effects of fertilizers on the environment and health of living organisms, especially humans, has encountered the country whit challenges such as increasing the number of cancer. Therefore, it is necessary to replace chemical fertilizers whit biofertilizers such as compost. Compost Causes increases in productivity and controls soil erosion.
    Methods
    In order to achieve the objectives of the research, literature review was conducted and to investigate the status of chemical fertilizers and compost in Iran and developed countries through internal and external databases, documents were collected.
    Results
    Use of fertilizers in Europe forecasted to decline 16 million tons in 2030, while in the Iran, rate of fertilizer forecast increases to 6700 thousand tons in 2020. Total supply of compost in the country is 164 thousand tons in 2009 and will be to 590 thousand tons in 2016. The total demand is 472 thousand tons in 2009 and will be to 661 thousand tons in 2016. This indicates that there is 71 thousand tons deficiency in the supply until 2016.
    Conclusion
    Use more of compost in the country, need to a multi-faceted management issue that Ministries, municipalities and recycle of organizations must be working together. Therefore necessary awareness aboute the adverse effects of indiscriminate use of fertilizers and also promote the use compost, in addition to reducing the use of chemical fertilizers, will be cause more demand for consumption of compost.
    Keywords: Compost, Fertilizer, Waste Management, Iran
  • Davoud Balarak, Edris Bazrafshan, Ferdos Kord Mostafapour Pages 224-237
    Background And Aim
    Discharge of industrial wastewater containing Pb into the environment can have harmful effects in the live organisms. Therefore, Pb must be removed from polluted water using an effective method before being discharged into the environment. The purpose of the present study was to examine Pb removal using alga Azolla biomass.
    Materials And Methods
    In this experimental study, removal of Pb(II) was performed using Azolla biomass considering changes in time, pH, adsorbent dose, initial concentration of Pb and mixing speed. Experiments were performed in batch reactor in flasks on Shaker. , Atomic absorption spectrophotometry was used for Pb determination. All experiments were conducted in triplicate and the mean removal percent was reported. Finally, biosorption kinetic and equilibrium isotherms of adsorbent was investigated.
    Results
    It was found that the higher removal efficiency of Pb occurred in pH 6 and aoptimum dsorbent dose 7 g/L. With increase in the initial concentration of Pb, removal efficincy decreased and with increasing of contact time and mixing speed,efficincy increased. Data also showed that the Langmuir isotherm and pseudo second-order kinetic are compliance.
    Conclusion
    Azolla biomass is an efficient and low-cost adsorbent for removing of Pb (II) from water and wastewater.
    Keywords: Synthetic Wastewater, Isotherm Adsorption, Pb (II), Azolla biomass
  • Maryam Khodadadi, Amir Hossein Mahvi, Hossien Vazieni, Rasoul Khosravi, Hadigheh Dorri, Mohammad Hossien Saghi Pages 238-248
    Introduction
    Fluoride and its compounds are widely used in industries and then through effluent are released into the environment. The purpose of this study was to evaluate Efficiency of low cost adsorbents (pistachios coal) in the removal of fluoride from aqueous solutions.
    Methods
    For the preparation of adsorbent, crust of pistachios deride, then washed with distilled water, then powder in the furnace for burning for 2 hours at temperatures of 500, 600, and 700 °C. The effect of changing pH, burning temperature of adsorbent, stirring speed, initial concentration of fluoride, retention time and adsorbent dose was studied. Concentration of fluoride measured according to standard method using spectrophotometer the data were analyzed using Excel software.
    Results
    The results of these experiments showed that the burning adsorbent, temperature 500 ° C, PH of solution in the neutral range (pH = 7), adsorbent dose of 2 g/L for absorbing almonds and adsorbent dose of 3 g pistachio, contact time of 40 minutes for both adsorbent, initial fluoride concentration (5ppm) for both absorbent without mixing, the optimal conditions for the efficiency of the absorber is as much as 90-80 percent.
    Discussion
    According to the results, pistachio coal can be used with high efficiency for fluoride removal.
    Keywords: Pistachio coal, Fluoride, Aquatic environments, Adsorbent