فهرست مطالب

Dental Research Journal - Volume:6 Issue: 2, Mar 2009

Dental Research Journal
Volume:6 Issue: 2, Mar 2009

  • تاریخ انتشار: 1388/02/15
  • تعداد عناوین: 9
|
  • Hasan Abedi, SHahriar SHahriari, Seyed Mohsen Jalalzadeh, Reza Moradkhany Page 55
    The purpose of this study was to compare the weight of root canal filling material used in a new lateral condensation technique named mechanical lateral condensation (MLC) with that of conventional lateral condensation technique (LC). This new technique uses reciprocal handpiece.
    In this experimental study, 40 human extracted straight canine teeth were used. After crown amputation, root canals were prepared with 18 mm in length. The teeth were randomly divided into four experimental groups; each group was consisting of 10 teeth. The teeth in groups IA and IB were filled by LC technique. The teeth in groups IIA and IIB were filled by MLC technique and using a finger spreader that placed in a reciprocating-action handpiece to laterally condense cold gutta-percha, creating space for accessory cones. All of the roots were weighted before and after obturation and the difference demonstrated the weight of gutta-percha mass. The data were analyzed by t-test.
    The mean weight for MLC obturations was 10.82 ± 0.025 g compared with 7.37 ± 0.035 g for that of LC technique. The difference was statistically significant (P = 0.001).
    This study showed that MLC technique requires more gutta-percha mass than LC technique.
    Keywords: Dental high, speed equipment, Gutta, percha, Root canal obturation
  • Matteo Danza, Annalisa Palmieri, Francesca Farinella, Giorgio Brunelli, Francesco Carinci, Ambra Girardi, Giuseppe Spinelli Page 59
    The aim of research was to study spiral family implant by finite element analysis (FEA) inserted in different bone qualities connected with abutments of different angulations.
    The biomechanical behaviour of 4.2 × 13 mm dental implants, connecting screw, straight and 15° and 25° angulated abutments subjected to static loads, in contact with high and poor bone qualities was evaluated by FEA.
    The lowest stress value was found in the system composed by implants and straight abutments loaded with a vertical force, while the highest stress value was found in implants with 15° angulated abutment loaded with an angulated force. In addition, we found the lower the bone quality, the higher the distribution of the stress within the bone.
    Spiral family implants can be used successfully in low bone quality but applying a straight force is recommended.
    Keywords: Biomechanics, Dental stress analysis, Finite element analysis, Spiral implant
  • Seyed Ebrahim Jabbarifar, Neda Ahmady, Seyed Ahmad Reza Sahafian, Fatemeh Samei, Shima Soheillipour Page 65
    Little research has been carried out on whether the parental stress affects children''s oral health in general and dental caries in particular. This study aimed to investigate the association between parental stress and early childhood caries (ECC).
    A cross-sectional study was designed that included 250 children of 4-6 year-old; 127 ones attended the pediatric department of Isfahan School of Dentistry who had early childhood caries and a comparison group of 123 caries free children attended five kindergartens and pre-schools in Isfahan city. Clinical examinations were conducted to evaluate the caries status. The parents of the two study groups completed the self-administrated long form of the Parenting Stress Index questionnaire. Details of their socio-demographic status were gathered too. The collected data were analyzed by SPSS version 11.5. The nonparametric Mantel-Haenszel test for correlation statistics was used to determine bivariate associations between total parenting stress and their domains scores in the two groups; i.e., those with early childhood caries and the caries free group.
    Mean score of PSI in the early childhood caries and caries free group were 286.66 ± 66.26 and 273.87 ± 31.03, respectively. There was not any significant relationship between total parental stress and ECC. The scores of the following domains of PSI demonstrated significant differences between ECC and CF groups: child reinforcement, child distractibility, child deficit attention, life stress and relationship with spouse (P = 0.01, 0.01, 0.001, 0.005 respectively).
    Findings of this study did not show any significant association between total parenting stress score and prevalence of early childhood caries.
    Keywords: Dental caries, Dental stress analysis, Oral health
  • Pratibha Panduranga Kundapur, Khandige Mahalinga Bhat, Giliyar Subraya Bhat Page 71

    Background: There have been passing references in history that excessive occlusal forces might be a causative factor in gingival recession. The purpose of the present cross-sectional study was to explore the role of trauma from occlusion on the development of gingival recession.
    Three hundred patients reporting to the department of Periodontics were screened for the presence of gingival recession in the lower incisors. A single trained examiner carried out clinical examination for signs of trauma from occlusion, such as fremitus test, presence of wear facets and mobility. The data were analyzed by chi square test.
    No statistically significant relationship was observed between the presence of a positive fremitus and wear facets with gingival recession. However, a significant association was observed between patients who experienced mobility and gingival recession.
    There does appear to be a relationship between fremitus and tooth wear with gingival recession based on the results of the present study, though not conclusive. However, the sign of tooth mobility, which is a feature of trauma from occlusion, appeared to be a predictor of positive association with gingival recession.
    Keywords: Dental occlusion, Gingival recession, Incisor, Tooth mobility, Traumatic
  • Sayed Mostafa Mousavinasab, Ian Meyers Page 75
    To measure the amounts of fluoride released from fluoride-containing materials, four glass ionomer cements (Fuji IX, Fuji VII, Fuji IX Extra and Fuji II LC), a compomer (Dyract Extra) and a giomer (Beautifil) were used in this study.
    Twenty cylindrical specimens were prepared from each material. The amount of released fluoride was measured during the first week and on the days 14 and 21 by using specific fluoride electrode and an ion-analyzer. The results were statistically analyzed using analysis of variance (two-way ANOVA) and Tukey Kramer multiple comparison tests (p=0.05).
    Significant differences were seen in fluoride release of different days and materials (p<0.05). The maximum cumulative fluoride release of days 1-7 was related to Fuji VII, followed by Fuji IX Extra, Fuji II LC, Fuji IX, Dyract Extra and Beautifil in descending order and this order remained the same until the 21st day.
    Fuji IX, Fuji VII, Fuji IX Extra, and Fuji II LC released higher amounts of fluoride compared to Beautifil and Dyract Extra in this study. It seems that the extent of the glass ionomer matrix plays an important role in determining the fluoride releasing ability of glass ionomer cement materials.
    Keywords: Compomers, Fluorides, Giomer, Glass ionomer
  • Saye Mohhamad Razavi, Parichehr Ghalayani, Mohammad RezaSalehi, H Attarzadeh, Mohammad Shahmoradi Page 82
    Oral lichen planus (OLP) is a common chronic inflammatory mucocutaneous disease. Clinical diagnosis of OLP requires clinical work-up and histologic examination to rule out possible dysplasia and carcinoma. It is possible that oral mucosal viral infections including HPV infection may have a causative role in OLP pathogenesis. The aim of this study was to examine the co-incidence of human papilloma virus type 18 and oral lichen planus.
    This study was a case-control study. Twenty nine paraffinized specimens of previously diagnosed oral lichen planus and 14 paraffinized specimens of nonpathogenic mucosa were studied. Polymerase Chain Reaction ( PCR) analyze used for detection of DNA HPV 18 .The data were analyzed with SPSS software and Fisher’s exact test was used to find the possible relation between HPV18 infection and oral lichen planus.
    Nine out of 29 (31.0%) lichen planus samples and one out of 14 (7.1%) controls were HPV 18 positive. No significant correlation (P = 0.128) was observed between HPV18 infection and oral lichen planus.
    According to the findings there might be a co-incidence of human papilloma virus type 18 and oral lichen planus.
    Keywords: Human papillomavirus 18, Lichen Planus, Oral, Polymerase chain reaction
  • Mostafa Sadeghi, Shokrollah Assar Page 87
    The microorganisms used in this study were Streptococcus mutans, Streptococcus sanguis, Actinomyces viscosus and Candida albicans. Sterile discs impregnated with 10 Iranian-made toothpastes; Paveh, Saviz, Latifeh II, Bath, Darugar II, Darugar I, Close up, Tage, Pooneh III and Nasim, which were separately used on agar plates. Crest Cavity Protection toothpaste and Sterile pyrogen-free distilled water were used as positive and negative controls, respectively. The samples were tested in triplicate, at full strength, 1:1 and 1:3 dilutions. Inhibition zones were measured in millimeter after 48 hr. The data were analyzed by the ANOVA and t-test.
    All tested toothpastes demonstrated an antimicrobial activity. The antimicrobial activity of Bath on S. mutans, Paveh on S. sanguis, Paveh, Saviz, Latifeh III and Darugar II on C. albicans were similar to the activity of Crest Cavity Protection. The antimicrobial activity of Pooneh III and Nasim on S. mutans, Bath on S. sanguis and A. viscosus, and Bath and Pooneh III on C. albicans were significantly higher and the others were significantly lower than the positive control. While, the activity of Crest Cavity Protection was the same as Pooneh III, it showed a weaker activity compared with Bath.
    Apart from Bath and Pooneh III, the other Iranian-made toothpastes tested in this study showed a lower antimicrobial activity compared to Crest Cavity Protection.
    Keywords: Anti, infective agents, Iran Toothpaste, Oral hygiene
  • Suleyman Hakan Tuna, Filiz Keyf, Gurel Pekkan Page 93
    The maxillary lateral incisor is the second most common congenitally absent tooth. There are several treatment options for replacing the missing maxillary lateral incisor, including canine substitution, tooth-supported restoration, or single-tooth implant. Dental implants are an appropriate treatment option for replacing missing maxillary lateral incisor teeth in adolescents when their dental and skeletal development is complete. This case report presents the treatment of a patient with congenitally missing maxillary lateral incisors using dental implants with angled abutments.
    Keywords: Dental abutment, Dental implants, Emergence profile, Incisor, Maxilla
  • Bhari Sharanesha Manjunatha, Gopal Siva Kumar, Raghunath Vandana Page 99
    Vascular neoplasms, other than benign are characterized as intermediate or malignant. They are often enshrouded in controversy, because the same neoplasm could show variability in biologic behavior that may not be correlated with microscopic features. The intermediate grade vascular neoplasm is named as epithelioid hemangioendothelioma (EHE). Epithelioid hemangioendothelioma of the oral cavity has been infrequently reported. To the best of our knowledge, the review of the English literature revealed a total of 30 cases of intraoral EHE reported till today. We report such a rare case in a 20 year old male, presented with a growth in lower anterior lingual gingiva since five months before the diagnosis with a history of similar swelling, twice in the same area. The differential diagnosis and brief review of literature is also discussed in the current article.
    Keywords: Epithelioid, Hemangioendothelioma, Hemangiosarcoma