به جمع مشترکان مگیران بپیوندید!

تنها با پرداخت 70 هزارتومان حق اشتراک سالانه به متن مقالات دسترسی داشته باشید و 100 مقاله را بدون هزینه دیگری دریافت کنید.

برای پرداخت حق اشتراک اگر عضو هستید وارد شوید در غیر این صورت حساب کاربری جدید ایجاد کنید

عضویت

فهرست مطالب ali atamaleki

  • Pouria Karimi, Ahmadreza Yazdanbakhsh*, Ali Atamaleki, Fatemeh Kariminejad, Mohammad Ahmadian, Sevda Fallah
    Background

    We aimed to conduct a meta-analysis on the concentration of potentially harmful elements (PHEs) in carrots and potatoes irrigated by wastewater and estimate non-carcinogenic health risks among adult and children consumers.

    Methods

    The health risk of PHEs concentration, including Pb, Cd, total Cr, Ni, Zn, Cu, and Fe, in the edible parts of carrot and potato irrigated by wastewater was investigated by a meta-analysis using a random-effects model (REM). Accordingly, the related articles were screened from international databases such as Scopus, Medline, and Embase.

    Results

    The meta-analysis of 32 papers (38 studies) revealed that the rank order of the most accumulated PHEs in potato was Fe (86.54 mg/kg wet weight) > Zn (30.9 mg/kg wet weight) > Cu (13.7 mg/kg wet weight) > Ni (8.42 mg/kg wet weight) > Pb (5.56 mg/kg wet weight) > Cr (3.45 mg/kg wet weight) > Cd (0.58 mg/kg wet weight). This ranking for carrot was Fe (43.36 mg/kg wet weight) > Zn (36.29 mg/kg wet weight) > Ni (13.49 mg/kg wet weight) > Cu (9.79 mg/kg wet weight) > Pb (1.84 mg/kg wet weight) > Cr (1.05 mg/kg wet weight) > Cd (0.28 mg/kg wet weight). Total hazard quotient (THQ) of PHEs was higher than 1 for potato and carrot; its rank order for potato and carrot was Cu > Pb > Cd > Ni > Fe > Zn > Cr and Cd > Pb > Cu > Ni > Fe > Zn > Cr, respectively. The Cd, Pb, and Cu had also a considerable role for consumer health risk.

    Conclusion

    According to the results, continuous monitor and control of wastewater treatment plants are necessary.

    Keywords: Wastewater, Food chain, Cadmium, Lead, Risk assessment}
  • Zahra Moradpour, Seyed Hasan Taghavi, Ghasem Hesam, Ali Atamaleki, Abdolmajid Garkaz*

    In the process of steel production by electric arc furnace (EAF), it is found that 10 to 20 kg of dust was emitted per every ton of produced steel. Concerning the pollution potential of emitted dust and its reuse ability, the present study was aimed to determine the chemical composition of the electric arc furnace dust with a reuse perspective. This study was done in a steel factory equipped with EAF. Local exhaust ventilation system is installed on the furnace and equipped with cyclone and venturi scrubber. To analysis of dust compounds were gathered in a cyclone and those left the system, the samples were taken from the cyclone hopper and exhaust fan outlet. Finally, the samples were analyzed by X-ray diffraction (XRD). According to the results, the trapped dust in the cyclone and scrubber were 226.86 and 44.81 kg/hr, respectively. The results obtained from XRD analysis also showed that about 50% of the dust was formed by Fe2O3. The quotient of other compounds such as CaO, MgO, SiO2, and Zn was more than 30%.

    Conclusion

    the results of this study showed that EAF dust composed of a range of elements with different concentrations. Given the high weight of these compounds, reusing some of these elements can be having a positive impact on health and the economy.

    Keywords: Electric Arc Furnace Dust, X-ray Diffraction, Reuse Perspective}
  • Ali Atamaleki, Mohammad Bagher Miranzadeh, Gholam Reza Mostafaii*, Hosein Akbari, Leila Iranshahi, Farshid Ghanbari, Atieh Salem
    Background

    Dissolved air floatation (DAF) is one of the methods has been used for the sludge thickening in wastewater treatment plants. This study aimed to investigate the effects of coagulation and sonication processes as additional configurations on the efficiency of a lab-scale DAF process for thickening of the biological sludge of an industrial wastewater treatment plant in Kashan, Iran.

    Methods

    The required amounts of sludge samples were collected from a wastewater treatment plant and kept at temperature of 4°C. Variables, such as pressure (3, 5, and 7 atm), flotation time (5 and 10 minutes), ultrasonic irradiation power (0, 75, and 150 W), and presence/absence of Fe-based coagulant were considered on a sequencing batch reactor (SBR) included coagulation, flotation, and sonication processes, respectively.

    Results

    The use of ultrasonic waves led to an insignificant increase in the DAF efficiency (P > 0.05), however, the application of coagulant significantly increased the thickening efficiency (P < 0.05). The maximum efficiency of the process was achieved at flotation time of 5 min, pressure of 3 atm, and sonication power of 75 W.

    Conclusion

    According to the results, DAF has a proper efficiency for thickening of biological sludge. Coagulation compared to sonication has a greater effect on the efficiency of the process.

    Keywords: Ultrasonic waves, Industrial effluent, Dissolved air flotation, Sonication}
  • منیره مجلسی، نادعلی علوی، علی عطاملکی، مصطفی سید، نجم الدین سهیلی*
    زمینه و هدف

    مدیریت منابع آب به منظور حفظ و تامین آب با کیفیت نقش مهمی در سلامت جوامع ایفا می کند. بدین منظور بشر همواره از روش های مختلفی برای تامین آب با کیفیت استفاده نموده است. یکی از این روش ها بکارگیری چاه های فلمن می باشد. در این مطالعه سعی شده است تا تاثیر چاه های فلمن بر کیفیت میکروبی و فیزیکوشیمیایی آب رودخانه دوغ در طی 5 سال مورد بررسی قرار گیرد.

    مواد و روش ها

    در این مطالعه برخی از پارامتر های کیفی رودخانه دوغ و چاه فلمن مجاورت آن مورد بررسی قرار گرفته اند. این چاه کسری آب شرب شهر گنبد کاووس واقع در استان گلستان را تامین می نماید. بدین منظور نمونه های ماهانه در طول سال های 91 تا 95 از رودخانه و چاه مجاور آن جمع آوری گردید، سپس پارامتر هایی از قبیل نیترات، فسفات، کدورت، دما، pH و کلیفرم های مدفوعی اندازه گیری شدند. در نهایت اثر تغییرات زمان و نفوذ آب از رودخانه به درون چاه بر پارامتر های کیفی مورد انالیز قرار گرفتند.

    یافته ها

    طبق نتایج بدست آمده، نیترات، فسفات، کدورت، pH، و کلیفرم های مدفوعی بصورت معناداری در طول مسیر کاهش یافتند (05/0P-Value <). علاوه بر این تغییرات زمانی نیترات، فسفات، کدورت، دما و کلیفرم های مدفوعی اختلاف معناداری نشان داد.

    نتیجه گیری

    اطلاعات بدست آمده اثبات نمود که چاه فلمن راندمان مناسبی جهت کاهش پارامتر های اندازه گیری شده داشته است. همچنین تغییرات ماهانه و فصلی می تواند اثر قابل توجهی بر کیفیت منابع آب داشته باشد.

    کلید واژگان: منابع آب, کیفیت آب, رودخانه, چاه فلمن, گلستان}
    Monireh Majlesi, Nadali Alavi, Ali Atamaleki, Mostafa Seyyed, Najmeddin Soheili*
    Background

    Water resource management in order to preserving and supplying of high-quality water, plays an important role on communities health. For this reason, humans have always used different methods to provide high-quality water. One of these methods is the use of Radial Collector wells. In this study, the effect of Radial Collector wells on the microbial and physicochemical quality of Doogh River during 5 years has been investigated.

    Methods

    In this study, we assessed some water quality parameters on Dough River (DR) and its adjacent Radial Collector Well (RCW) which supplies water shortage of Gonbad Kavous city, Golestan province, Iran. For this purpose, monthly samples during 2012 to 2016 were collected from DR and RCW, then parameters included nitrate, phosphate, turbidity, pH, fecal coliform, and temperature were measured. Finally, effect of time variation and infiltration of water from DR to RCW on qualitative parameters was analyzed.

    Results

    According to the results, nitrate, phosphate, turbidity, pH, and fecal coliforms significantly decreased during infiltration process (P-Value <0.05). In addition, the time variation of nitrate, phosphate, turbidity, temperature, and fecal coliforms had significant difference.

    Conclusion

    The present dataset demonstrated that RCW has a good efficiency for reduction of measured parameters. Also, monthly variations can be effective on water quality of resources.

    Keywords: Water resources, Water quality, River, Radial collector well, Golestan}
  • Ali Atamaleki, Rohollah Fallah Madvari, Mohammad Dolati, Meysam Faramarzi, Rajabali Hokmabadi*, Mohammad Amin Younesieh Heravi, Saeedeh Zare Jamalabadi
    Background
    One of the most harmful agents in hospital settings is ionizing radiation such as X-rays that physicians and other staff expose in surgeries and diagnostic tests. Therefore, the aim of this study was to measure X-ray dose in the diagnostic radiology units of hospitals affiliated to North Khorasan University of Medical Sciences.
    Methods
    This is a descriptive-analytical, cross-sectional study, in which all of the hospitals' diagnostic radiology units including CT scan, mammography, fluoroscopy and radiography were studied. X-ray dose was measured by a dosimeter-radiometer device (MKS-05 Terra-P). The International Radiation Protection Association (IAEA) checklist was used to check the observance of the Radiation Protection Principles.
    Results
    The results of this study showed that the X-ray doses in the CT scan, mammography, and fluoroscopy units of Bojnord Imam Ali Hospital were 0.16, 0.08 and 0.01 μSv/h, respectively. The doses of X-ray in the radiology units of Imam Ali (PBUH), Imam Reza (PBUH), Esfarayen and Shirvan Hospitals were 0.12, 0.12, 0.11, and 0.11 μSv/h, respectively.
    Conclusion
    According to the results, the X-ray doses in the diagnostic radiology units of hospitals were lower than the standard limit proposed by the International Radiation Protection Association. However, it is proposed to use appropriate protective lead aprons to further protect the exposed staff in the units in question.
    Keywords: X-ray, Radiological, Hospital, Radiology}
  • حسین آذرپیرا*، طیبه رسوله وندی، رحیم عالی، امیر حسین محوی، محمد امین قربانپور، حانیه مرادی، علی عطا ملکی، مریم صادقی پور، زهرا سرلک
    نیترات، نیتریت و دیگر پارامترهای فیزیکوشیمیایی آلاینده های منابع آب زیرزمینی که عمدتا با کشاورزی، مناطق دفع زباله و فاضلاب مرتبط است. هدف از این مطالعه تعیین این پارامترها در استفاده از منابع آب زیرزمینی شهر ساوه با استفاده از سیستم اطلاعات جغرافیایی در سال 2018 و بررسی آلاینده های موجود در آبخوان منطقه است.
    این تحقیق یک مطالعه توصیفی-تحلیلی است. تعداد 120 نمونه آب از 12 حلقه چاه در فصل بهار و دو نوبت صبح و بعدازظهر در نقاط مختلف شهر ساوه که برای تامین آب آشامیدنی استفاده می شود تهیه شد. پارامتر ها وارد نرم افزار سیستم اطلاعات جغرافیایی شده و به صورت بانک اطلاعاتی ذخیره گردید و پس از پردازش، توسط نرم افزار سیستم اطلاعات با پهنه بندی رنگی تهیه و نقشه های هم (GIS) جغرافیایی وظعیت کیفی ترسیم گردید. همچنین از روش درون یابی معکوس برای تخمین شرایط کل منطقه استفاده گردید.
    غلظت متوسط کلرور، سولفات ، هدایت الکتریکی، کل جامدات محلول، سختی کل و سدیم از حدود مجاز فراتر رفته و شرایط غیر کیفی آب کاملا مشهود است. همچنین میزان دو یون سینرژیست منیزیم و سولفات که در استاندارد 1053 میزان آنها نباید به صورت متقابل به ترتیب بیش از 250 و 30 میلی گرم بر لیتر باشد اما متاسفانه از این استاندارد تبعیت نکرده است. باید در نظر داشت میزان بالای هم زمان این دو یون میتواند باعث اختلال در جهاز هاظمه می گردد. همچنین میزان فلوراید و نیترات در همه نقاط در حدود مجاز بوده است.
    کلید واژگان: کیفیت, چاه, پهنه سازی, استاندارد}
    Hossein Azarpira, *Tayebeh Rasolevandi, Rahim Aali, Amirhossein Mahvi, Mohammad Amin Ghorbanpour, Hanieh Moradi, Ali Atamaleki, Maryam Sadeghipour, Zahra Sarlak
    Background and
    Purpose
    Nitrate, nitrite and other physicochemical parameters of the pollutants of groundwater resources which are mainly associated with agricultural and wastewater disposal areas. The aim of this study was to determine these parameters in drinking groundwater resource of Saveh city using Geographic Information System during the year of 2018 and investigation of contaminant’s in the region’s aquifer.
    Materials And Methods
    In this descriptive cross - sectional study, data including temperature, Nitrate, Nitrite, pH, TDS, Total hardness, Fluoride, Ammonium, Sulfate, Chloride, and Sodium’s monitoring in Saveh during the year of 2018. Monthly concentrations of these parameters were calculated, and then relationships between pollutants and region’s aquifer analyzed by GIS software version 9.3. Also, the Inverse Distance Wighted (IDW) method was used to estimate the conditions of the whole region.
    Findings: The average concentration of chlorine, sulfate, electrical conductivity, total soluble solids, total hardness and sodium exceeds the permissible limits, and the non-qualitative water conditions are quite evident. Also, the amount of two magnesium and sulfate synergist ions that in their 1053 standard should not exceed 250 and 30 mg/l respectively, but unfortunately did not conform to this standard. It should be kept in mind that the high level of these two ions simultaneously can disrupt the harshness. Fluoride and nitrate levels were also acceptable range in all areas.
    Conclusion
    The highest deviation level from 1053 standard was for total soluble solids, sodium, magnesium, and sulfate. It is better to consider a comprehensive program to solve the problem, including use of nanotechnology, filtering or ion exchange
    Keywords: Quality, Well, Zoning, Standard}
  • Ali Atamaleki, Gholamreza Mostafaii, Mohammad Bagher Miranzadeh*, Hossein Akbari, Leila Iranshahi, Atieh Salem
    Aims: Increasing population density in cities has led to an increase in industrial and municipal wastewater sludge generation volume. Dissolved air flotation (DAF) can widely be used for water and wastewater treatment. The aim of our study is to evaluate some DAF design parameters on biological sludge thickening which generated from an industrial wastewater treatment plant.
    Materials And Methods
    This experimental research had been carried out as a laboratory-scale study on DAF process to thickening of the biological sludge. The required amount of sludge was taken once from the Amikabir industrial town wastewater treatment plant in Kashan, Iran. After determination of optimal recycling rate, pH, and coagulant dose, effects of pressure (3, 5, and 7 atm), flotation time (5 and 10 min), and coagulant addition were evaluated on DAF process efficiency.
    Results
    According to this investigation results, the optimal pH and dose of coagulant were obtained 7.5 and 200 mg/L, respectively. Maximum process efficiency for the reduction of total dissolved solids (TDSs), total solids (TSs), and turbidity parameters was 61.01%, 84.02%, and 97%, respectively. Furthermore, the results showed that in contrast to time, coagulant addition and pressure have significant effect on DAF process.
    Conclusion
    DAF process had suitable thickening efficiency to removal of TDS, TS, and turbidity on biological activated sludge.
    Keywords: Flotation, industrial wastewater treatment, sludge disposal, thickening}
بدانید!
  • در این صفحه نام مورد نظر در اسامی نویسندگان مقالات جستجو می‌شود. ممکن است نتایج شامل مطالب نویسندگان هم نام و حتی در رشته‌های مختلف باشد.
  • همه مقالات ترجمه فارسی یا انگلیسی ندارند پس ممکن است مقالاتی باشند که نام نویسنده مورد نظر شما به صورت معادل فارسی یا انگلیسی آن درج شده باشد. در صفحه جستجوی پیشرفته می‌توانید همزمان نام فارسی و انگلیسی نویسنده را درج نمایید.
  • در صورتی که می‌خواهید جستجو را با شرایط متفاوت تکرار کنید به صفحه جستجوی پیشرفته مطالب نشریات مراجعه کنید.
درخواست پشتیبانی - گزارش اشکال