فهرست مطالب d. azan
-
ظرفیت باربری پی های محدود واقع بر شیروانی های خاکی محدب موضوعی سه بعدی است که فرض دوبعدی آن نمی تواند جواب های دقیقی را ارائه کند. بنابراین به منظور اینکه بتوان نتایجی کاربردی و قابل استفاده برای مهندسان در محاسبه ی ظرفیت باربری پی های واقع بر سطح شیروانی خاکی محدب به دست آورد، از یک نرم افزار اجزاء محدود قوی به نام آباکوس، که قابلیت به کاربردن مدل جامع خاکی موهر کلمب را در حالت سه بعدی داشته باشد، برای به دست آوردن اثر انحناء شیروانی های خاکی محدب در پلان در ظرفیت باربری پی های واقع بر آن استفاده شده است. چون نتایج برای خاک های رسی و ماسه یی متفاوت است، لذا در این نوشتار فقط به نتایج حاصل برای خاک های ماسه یی پرداخته شده و اثر سایر پارامترها نیز علاوه بر اثر انحناء بررسی شده است. نتایج حاکی از این مطلب است که با افزایش شعاع انحناء شیروانی های خاکی محدب ظرفیت باربری نیز افزایش می یابد، که این نتایج به صورت نمودارهای کاربردی برای استفاده ی مهندسان نشان داده شده است.
کلید واژگان: ظرفیت باربری, شیروانی های خاکی محدب, اجزاء محدود, شعاع انحناء شیروانی های خاکی}The bearing capacity of finite foundations located on slopes that are convex in plan is investigated by three-dimensional models. In this study, we utilized a powerful finite element software, using the Mohr Coulomb constitutive model, in three dimensions, to obtain practical results for the bearing capacity of foundations located on slopes that are convex in plan. The results show that with an increase in the radius of curvature of the convex slopes, the bearing capacity of square foundations located on them also increases. The results are displayed in the form of practical charts for engineer usage. These plots can be utilized for practical purposes by estimating the bearing capacity of equivalent foundations located on straight slopes from limit equilibrium, or finite element codes that are used in soil mechanics, for example, Plaxis software. Although the effect of the radius of curvature on the bearing capacity of foundations is lower than other parameters. When other parameters are obtained with a good degree of precision, these results could be used complementarily for achieving comprehensive results for practical purposes in civil engineering projects. Because Abaqus is a very powerful code that can be used for soil materials, we can trust its calculated results. As the Abaqus code has very advanced techniques for mesh generation, for obtaining results with the most precision, the mesh is generated very carefully with finer elements near the foundation and coarser elements in locations far from the foundation. The primary purpose for generating such mesh is calculation of the bearing capacity of foundations. Not only are the results affected by the radius of curvature of the slope, they also depend on other parameters, like the friction angle of sandy soil, and distance of the foundation from the crest of the slope. Therefore, we studied these parameters in addition to the radius vature of the slopes.
Keywords: Bearing Capacity, Convex Slopes In {, Bf Plan} View, Finite Element, Radius Of Curvature Of Convex Slopes}
- در این صفحه نام مورد نظر در اسامی نویسندگان مقالات جستجو میشود. ممکن است نتایج شامل مطالب نویسندگان هم نام و حتی در رشتههای مختلف باشد.
- همه مقالات ترجمه فارسی یا انگلیسی ندارند پس ممکن است مقالاتی باشند که نام نویسنده مورد نظر شما به صورت معادل فارسی یا انگلیسی آن درج شده باشد. در صفحه جستجوی پیشرفته میتوانید همزمان نام فارسی و انگلیسی نویسنده را درج نمایید.
- در صورتی که میخواهید جستجو را با شرایط متفاوت تکرار کنید به صفحه جستجوی پیشرفته مطالب نشریات مراجعه کنید.