جستجوی مقالات مرتبط با کلیدواژه "مدیریت اراضی" در نشریات گروه "علوم انسانی"

Desertification is the greatest environmental challenge that serious threats to food security and biodiversity. This research was conducted with the aim of evaluating the risk of desertification and providing management plans using the DPSIR-M conceptual model in Khorasan Razavi province and in 4 steps. These steps include; - Collecting data and preparing basic maps, - Choosing a model to prepare a desertification intensity map, - Assessing the risk of desertification and finally, providing management plans based on the conceptual approach of DPSIR-M. The results showed that more than 30% of the study area are located in the relatively critical to severe desertification class. In terms of fragility, about 59% of the areas of Khorasan Razavi province are in relatively fragile to very fragile environmental conditions, and about 7% have the potential of fragility. The results of the desertification risk map showed that more than 98% of the regions are in the high and very high desertification risk class, and only 2% of the areas are in the moderate to very low classes. This issue can be a serious warning of the land degradation for the officials and executives of Khorasan Razavi province. Therefore, based on the intensity and risk maps of desertification and using the DPSIR-M model, six policies and 46 strategies and action plans were proposed for optimal land management. The proposed programs are in the form of preventive, corrective and rehabilitation programs. Therefore, it is suggested that the results obtained from this research be used by managers and experts of executive departments.

Soil properties at the lands lot scale is a process that effects on infiltration rates, which can lead to an increased stormwater runoff. Sustainable land management for runoff controls requires reliable information on the spatial distribution of soil infiltration rate. The traditional method of soil analysis and interpretation are laborious, time-consuming, hence becoming expensive. Therefore spatial analysis of infiltration rate is necessary for the determination of susceptible areas for surface runoff. The purpose of this study was to propose alternative approaches in searching for infiltration rate and surface runoff hotspots. The study was conducted on an agricultural field at Khodafarin, East Azarbaijan province, Iran. It is with 675500 to 692500 longitudinal coordinates and 4332500 to 4349000 latitude coordinates. To arrive at the goal of this research, 88 sample points were selected with using a geographic information system and considering the Soil distribution pattern and land utilization. Infiltration rate data was collected from double rings method with 3 replicated at each point. Soil samples were obtained from each point and then sent to soil analyzed laboratory to determine physical and chemical properties. Kriging method was used for the interpolation of the study area. Finally, soil properties distribution layer expended in Arc GIS software that analyzing hot spot surface runoff hazard. The significant correlation of infiltration rate with soil parameter including porosity, sand, silt, and organic content. Overall, at wide distances of case study lands organic material and porosity were assessed effectively to water permeability into the soil and other measured parameters due to statistics were without specified spatial distribution. The results showed that Simulation generates equally likely sets of values for a variable, which are consistent with available in-situ measurements. The information on spatial sampling density and hotspot pattern could be useful for long-term monitoring and assessment.

    In order to calculate the erosive power of rainfall, high-resolution precipitation data are necessary for rainfall erosion evaluation. However, collecting the required data on kinetic energy of the rainfall particles and precipitation rates with short-term temporal resolution is a time-intensive task, particularly in developing countries, and the collected data are difficult to process. Rain sensors provide valuable information on the rate and intensity of rainfall, but fail to adequately represent irregular and inconsistent spatial distribution of the precipitation when evaluating the precipitation rate as those perform point measurements of precipitation. Under such circumstances, evaluation of precipitation rate from satellite data provides an alternative approach to the problem, which makes it possible to estimate precipitation rate and its spatial distribution across large areas. All around the world, several research works have been performed to estimate soil erodibility factor using the precipitation product of TRMM sensor, while no research has used such products for erosion and erodibility studies in Iran. Given that a limiting factor for estimating rainfall erosive power across large areas in Iran has been the lack of required data on precipitation intensity or precipitation rate, the present research can provide an approach to address such limitations. This study is aimed at monitoring the precipitation and hence evaluating and monitoring soil erodibility factor using precipitation products of TRMM sensor and comparing the results with those of terrestrial stations     In this research, in order to use Modified Fournier Index (MFI) to estimate corrosive rate during 2000, 2005, 2010, and 2015, monthly precipitation products data of TRMM3B24 sensor was retrieved from http://apdrc.soest.hawaii.edu for all months of the considered years. Then, using the Fournier index and the equation proposed by Renard and Ferimvend, the erosive rate for the entire country was extracted for the four years considered in this study. In order to verify and evaluate the accuracy of the precipitation products of TRMM sensor, the monthly precipitation data collected from 45 terrestrial stations were used, and interpolation technique was used to develop precipitation and erosion maps based on the terrestrial data. Accuracy of the precipitation products of TRMM sensor was verified based on root-mean-square error (RMSE) and coefficient of determination (CD) of the annual precipitation at the pixel position of the synoptic stations. Results of evaluating annual precipitation rates indicated among the monitored years, the 2010 had experienced the lowest level of precipitation, while the 2000 was the year with the highest precipition level. A review on rainfall erosion maps indicated that, in 2000, the areas of the country with the highest erosion rates corresponded to the Middle Zagros and Caspian areas. The country’s erosion map in 2005 closely resembled that in 2000, the erosion rates in the southern Kerman and northern Hormozgan were significantly lower than 2005. In 2010, when mean annual precipitation exhibited a low, the Chabahar Area exhibited the lowest erosion rate across the country, because of the intrusion of a seasonal air mass in June. In 2015, once again, maximum erosion rate across the country corresponded to those in 2000 and 2005, as determined by increased precipitation rate. A comparison between annual precipitation data collected from TRMM sensor and synoptic stations showed that, during all of the four years, an adequately good R2 value was established between the data from TRMM and that from terrestrial stations. The highest value of R2 between the TRMM and terrestrial stations data was obtained for 2000 (0.86), while the lowest R2 value was that of 2015 (0.73). The obtained value of RMSE showed that, in 2000 (the year with the highest precipitation rate among the monitored years), the value of RMSE was 152 mm. For this year, the difference between the peak participation estimated from the two methodologies was 406 mm, which was mainly related to the four stations with the highest precipitation rates. In 2005, the difference between the peak participation estimated based on the data from the two sources was 543 mm, with a RMSE of 205 mm. Also in this year, the difference between minimum precipitation values was highest, as compared to the other years considered in this study. In 2010, the difference between the peak participation estimated based on the data from the two sources was 533 mm, with the RMSE reduced to 129 mm. Spatial resolution includes terrestrial dimensions of each pixel of the image and determines accuracy of the image. Terrestrial dimensions of each pixel of the precipitation products of TRMM is 25 km by 25 km. Given the nature and definition of the pixel, it is the smallest spatial unit with its most important characteristic being the consistency across the entire pixel. Accordingly, the 625-km2 area of each pixel of an image from TRMM takes only one numerical value (DN) which is an average value of the precipitation across the entire 625-km2 area. Therefore, accuracy of each pixel in recording the precipitation depends on the variations of precipitation across the mentioned area. Terrestrial stations provide point estimations of precipitation, and interpolation technique is used to prepare erosion and precipitation maps from terrestrial stations. Accordingly, the higher the number of points included in the process of interpolation, the more flexible will be the resultant interpolated map. Given the fundamental differences between precipitation measurements by satellite sensors and classic terrestrial stations, it is difficult to firmly express that the data from terrestrial stations shall be taken as reference data and the remote sensing data shall be verified against the terrestrial data, because even in point measurements, there are cases where the precipitation condition in points near the measurement point is significantly different from that at the measurement point.