به جمع مشترکان مگیران بپیوندید!

تنها با پرداخت 70 هزارتومان حق اشتراک سالانه به متن مقالات دسترسی داشته باشید و 100 مقاله را بدون هزینه دیگری دریافت کنید.

برای پرداخت حق اشتراک اگر عضو هستید وارد شوید در غیر این صورت حساب کاربری جدید ایجاد کنید

عضویت

جستجوی مقالات مرتبط با کلیدواژه "smooth inverse modeling" در نشریات گروه "زمین شناسی"

تکرار جستجوی کلیدواژه «smooth inverse modeling» در نشریات گروه «علوم پایه»
جستجوی smooth inverse modeling در مقالات مجلات علمی
  • رضا احمدی*، جواد احسان نژاد
    مقدمه

    مدلسازی های ژئوفیزیکی از نظر ابعادی به انواع یک بعدی (1D)، دوبعدی (2D) و سه بعدی (3D) تقسیم می شوند. در برخی موارد بویژه مناطق دارای پیچیدگی های ذاتی، انجام مدلسازی های یک بعدی و یا حتی دوبعدی برای نیل به مقاصد اکتشافی کافی نبوده و نیاز به انجام مدلسازی سه بعدی به خوبی احساس می شود. از مزایای مدلسازی سه بعدی نسبت به دو نوع دیگر، واقع گرایانه تر بودن پاسخ ها و دقت بالاتر نتایج می باشد. به هرجهت مدلسازی سه بعدی نیاز به برداشت داده های سه بعدی دارد حال آنکه در بسیاری از موارد، برداشت های ژئوفیزیکی در راستای یک سری پروفیل ها، به صورت دوبعدی صورت می گیرد و مدلسازی های مربوطه نیز دوبعدی خواهد بود. در چنین مواردی برای دست یابی به مدل سه بعدی واقع گرایانه تر باید به یک سری ترفندهای ریاضیاتی- محاسباتی منطقی و در عین حال مبتنی بر اصول فیزیکی متوسل شد. روش های مغناطیس سنجی و ژئوالکتریک شامل مقاومت ویژه و قطبش القایی، مناسب ترین روش های ژئوفیزیکی برای اکتشاف کانسارهای مس هستند. در پژوهش حاضر عملیات پردازش، مقایسه و تجزیه و تحلیل داده های ژئوفیزیکی مغناطیس سنجی، مقاومت ویژه و قطبش القایی در راستای پروفیل های ژئوفیزیکی برداشت شده در کانسار مس علی آباد یزد صورت گرفته و ارتباط آنها با کانی زایی تعیین شده است. سپس مدلسازی سه بعدی داده های ژئوفیزیکی مقاومت ویژه و قطبش القایی دوبعدی برداشت شده در کانسار به کمک پردازش های زمین آماری و با استفاده از نرم افزار RockWorks16 صورت گرفته است. کانسار مس علی آباد در شهر تفت در استان یزد در بخش میانی زون ارومیه- دختر بین طول جغرافیایی 768000 تا 771000 شرقی و عرض جغرافیایی 3503000 تا 3507000 شمالی قرار دارد. براساس گزارش کانسارهای مس در ایران، تنوع لیتولوژیکی در این منطقه بسیار زیاد بوده و سنگ های قدیمی منطقه، سلسله جبال شیرکوه با سنگ های گرانیتی و گرانودیوریتی هستند. قدیمی ترین رخنمون های سنگی در منطقه علی آباد از نوع کنگلومرا و ماسه سنگ (سازند سنگستان) مربوط به اواخر ژوراسیک و اوایل کرتاسه می باشند. سازند سنگستان از سازندهای اصلی منطقه به شمار می رود و مرز زیرین این سازند به طور دگرشیب بر روی گرانیت های شیرکوه قرار گرفته است. کانی سازی مس در کانسار علی آباد به طور عمده درون استوک نفوذی گرانیتوئیدی و به مقدار کمتر درون کنگلومراها و ماسه سنگ های دگرگون شده اطراف آن رخ داده است.

    مواد و روش ها

    در کانسار مس علی آباد تعداد 1666 ایستگاه مغناطیسی با فواصل 20 متر از یکدیگر، مقاومت ویژه ظاهری و قطبش القایی توسط آرایه مستطیلی و چهار شبه مقطع بارپذیری و مقاومت ویژه ظاهری به نام های DD-1 (با آرایه دوقطبی- دوقطبی)، PD-2، PD-3 و PD-4 با آرایه قطبی - دوقطبی با طول های به ترتیب 1320، 1240، 600 و 640 متر برداشت شده است. در این پژوهش ابتدا مدلسازی وارون هموار دوبعدی داده های بارپذیری و مقاومت ویژه ظاهری چهار پروفیل به روش کمترین مربعات خطا با استفاده از نرم افزار RES2DINV صورت گرفت. بعد عملیات پردازش، مقایسه و تجزیه و تحلیل داده های ژئوفیزیکی مغناطیس سنجی، مقاومت ویژه و قطبش القایی در راستای پروفیل های ژئوفیزیکی برداشت شده در کانسار، صورت گرفت و ارتباط آنها با کانی زایی تعیین شد. برای این منظور پروفیل های برداشت مغناطیسی منطبق بر مقاطع مقاومت ویژه و بارپذیری وارون سازی شده چهار پروفیل ژئوالکتریک، ترسیم شده و مورد تجزیه و تحلیل قرار گرفت.

    نتایج و بحث:

    نتایج پژوهش نشان می دهد که در مجموع تطابق و انطباق خوبی بین داده های مغناطیس سنجی و ژئوالکتریک وجود دارد و این امر نشان دهنده آن است که بی هنجاری های موجود در منطقه اغلب در ارتباط با کانی سازی های فلزی هستند. سپس تجزیه و تحلیل آماری اولیه برای داده های وارون سازی شده در محدوده مشترک چهار پروفیل ژئوفیزیکی و آرایه مستطیلی انجام شد. براساس این مطالعات توزیع داده های بارپذیری از نوع نرمال و برای داده های مقاومت ویژه از نوع لاگ نرمال است که با یک تبدیل لگاریتمی دوپارامتری به توزیع نرمال تبدیل شد. در ادامه برای تشخیص ساختار فضایی حاکم بر داده های مقاومت ویژه و بارپذیری در منطقه، واریوگرام های امتدادی در دو راستای افقی شمالی - جنوبی و شرقی - غربی و نیز راستای قائم (عمقی) ترسیم گردید. نتایج نشان داد که تمامی مدل های تئوری واریوگرام منطبق بر واریوگرام های تجربی، از نوع کروی بوده و منطقه دارای ناهمسانگردی از نوع هندسی است. در مرحله بعد براساس نتایج عملیات واریوگرافی، مدل سه بعدی داده های مقاومت ویژه و بارپذیری با استفاده از نرم افزار RockWorks و به کمک الگوریتم درونیابی عکس فاصله وزن دار پیشرفته انجام شد. در نهایت براساس مدلسازی سه بعدی صورت گرفته، موقعیت امیدبخش ترین و مناسب ترین محدوده کانی سازی مشخص گردید و حفر یک گمانه اکتشافی قائم با طول 80 متر در این موقعیت پیشنهاد شد.

    نتیجه گیری

    براساس یافته ها، حفاری گمانه در موقعیت پیشنهادی، ترسیم دقیق چاه نگار گمانه، مقایسه نتایج عیارسنجی مغزه های حفاری، سنگ شناسی و دگرسانی با نتایج مدل سازی ژئوفیزیکی سه بعدی در این محل، ضروری است. حفر گمانه اکتشافی پیشنهادی منجر به شناخت بیشتر کانسار، امکان ارزیابی کارآیی عملیات ژئوفیزیکی برداشت شده و مدلسازی سه بعدی انجام گرفته در کانسار مس علی آباد خواهد شد.

    کلید واژگان: کانسار مس علی آباد یزد, مدلسازی وارون هموار, مغناطیس سنجی, نرم افزار Rockeworks, واریوگرافی
    Reza Ahmadi *, Javad Ehsan Nejad
    Introduction

    Geophysical modeling is divided into one-dimensional (1D), two-dimensional (2D) and three-dimensional (3D) types in terms of dimensions. In some cases, especially in areas with inherent complications, performing 1D or even 2D modeling is not enough to achieve exploration goals, whereas 3D modeling is needed. One of the advantages of 3D modeling compared to the other two types is the more realistic responses and higher accuracy of the results. However, 3D modeling requires 3D data collection, while in many cases, geophysical surveys are done in 2D along a series of profiles, therefore, the related modeling will also be 2D. In such cases, in order to achieve a more realistic 3D model, it should be resort to a series of logical mathematical-computational tricks while based on physical principles. Magnetometric and geoelectrical methods, including resistivity and induced polarization, are the most suitable geophysical methods for discovery of copper deposits. In the present research, the processing, comparison and analysis of geophysical data of magnetometry, resistivity and induced polarization have been carried out along the profiles surveyed in the Yazd, Aliabad copper deposit and their relationship with mineralization has been determined. Then, 3D modeling of 2D geophysical data containing resistivity and induced polarization surveyed at the deposit has been done through geostatistical processes and employing RockWorks16 software. Aliabad copper deposit is located in the Taft city in Yazd province in the middle part of Urmia-Dokhtar zone between eastern longitude of 768000 to 771000 and northern latitude of 3503000 to 3507000. According to the report of copper deposits in Iran, the lithological diversity in this region is very high and the ancient rocks of the region are the Shirkoh mountain range with granite and granodiorite rocks. The oldest rock outcrops in the Ali-Abad area are conglomerate and sandstone (Sangestan Formation) from the late Jurassic and early Cretaceous. Copper mineralization in Ali-Abad deposit mainly occurred into granitoid intrusive stock and with less extent in conglomerates and metamorphosed sandstones around it.

    Materials and Methods

    In Aliabad copper deposit, 1666 magnetic data-points with 20-meter interspacing as well as resistivity and induced polarization have been surveyed through rectangular configuration along four profiles called DD-1 (with dipole-dipole array), PD-2, PD-3 and PD-4 by pole-dipole array with the length of 1320, 1240, 600 and 640 meter, respectively. In this study, first, 2-D smooth inverse modeling of resistivity and chargeability data for four profiles was carried out by the least squares error method using Res2dinv software. Afterward, the operations of processing, comparison and analysis of magnetic, resistivity and chargeability data from the geophysical profiles was performed and their relationship with mineralization was determined. To achieve the goal, magnetic surveyed corresponding to four inverted resistivity and induced polarization sections from geoelectrical profiles, were drawn and analyzed.

    Results and Discussion

    The results of the research show that in general, there is a good accordance between magnetic and geoelectrical data whereas the anomalies in the area are often related to metallic mineralization. Afterward, the primary statistical analysis was performed for the inverted data in the common range of four geophysical profiles and rectangular array. Based on these studies, the distribution of induced polarization and resistivity data are normal and log-normal, respectively which was transformed into a normal distribution with a two-parametric logarithmic transformation. Then, to achieve the spatial structure governing on resistivity and chargeability data of the region, strike variograms were drawn in two horizontal directions of north-south and east-west as well as vertical (depth) direction. The results revealed that all theoretical variogram models according to experimental variograms are spherical type and the region has geometric anisotropy. In the next step, based on the results of variography operation, 3-D models of resistivity and chargeability data were produced using Rockworks software through interpolation algorithm of advanced inverse distance weighted. At the end, on the basis of 3-D performed modeling the position of the most promising and appropriate mineralization area was determined as well as proposing a vertical borehole with the length of 80 m in this location.

    Conclusion

    On the basis of the findings, drilling a borehole in the proposed location, carefully drawing of the borehole strip-log, comparing the results of drilling cores assay, lithology and alteration with the results of 3D geophysical modeling in this place are necessary. Drilling of the proposed borehole will lead to more recognition of the deposit, possibility of evaluating the effectiveness of the carried out geophysical operation and 3D modeling in the Aliabad copper deposit.

    Keywords: Yazd Ali-Abad Copper Deposit, Smooth Inverse Modeling, Magnetometry, Rockworks, Variography
  • منصور عادل پور، ایرج رساء، فریبرز مسعودی، مسعود حسینی
    در این پژوهش، سعی شده است تا با تلفیق نتایج به دست آمده از بررسی های زمین شناسی، زمین شیمیایی سطحی و زمین فیزیک، ضمن تکمیل بررسی های یادشده ، با استفاده از روش های جدید زمین فیزیک اکتشافی، موقعیت مکانی زون کانی سازی کانسار مس گرماب (شمال شرق قائن) تعیین شود. بعد از الکترومغناطیس، از متداولترین روش های زمین فیزیکی قابل استفاده در اکتشاف کانسارهای سولفیدی مس، روش های قطبش القایی و مقاومت ویژه الکتریکی است. در این پژوهش، از این روش در حوزه زمان استفاده شد و مولفه های ثابت زمانی ظاهری، وابسته بسامد ظاهری و بارپذیری حقیقی استخراج شد. پس از تفسیر نتایج، نواحی بی هنجاری در مناطق با بارپذیری متوسط و همچنین مقاومت ویژه الکتریکی کم تا متوسط شناسایی شد که این امر را می توان به حضور کانی های سولفیدی در مناطق کانی سازی نسبت داد،. همچنین، با استفاده از نتایج مولفه ثابت زمانی، میانگین دانه بندی دانه های فلزی در منبع تولید کننده قطبش القایی دریافت شد. با توجه به این که نتایج خام اندازه گیری ها، اطلاعات کمی دقیق و مطمئنی درباره عمق و هندسه توده های کانی سازی شده زیر سطحی در اختیار قرار نمی دهند؛ با استفاده از مقاطع حاصل از مولفه های قطبش القایی و مدل سازی معکوس هموار برای تعیین محلهای احتمالی، گسترشهای جانبی و قائم کانی سازی های زیر سطحی استفاده شد. بررسی های زمین فیزیک نشان می دهد، کانی سازی بیشتر به صورت محدوده های کوچک و پراکنده است.
    کلید واژگان: قطبش القایی, مقاومت ویژه الکتریکی, مدل سازی معکوس, مس, قائن
    Mansour Adelpour, Iraj Rasa, Fariborz Masoudi, Masoud Hosseini
    Introduction
    The Garmab copper deposit is located northeast of Qaen (South Khorasan province) in the1:100,000 scale map of Abiz in the eastern tectonic zone of Iran. It is hosted by Late Paleocene-Eocene lava flows consisting mainly of andesite, trachy andesite, andesite-basalt and basalt lavas, as well as pyroclastic rocks, including tuffs and ignimbrites. The Lut Block has undergone intense magmatic activitywith a variety of geochemical characteristics due to changing tectonic conditions (e.g., compression during subduction followed by tensional conditions; Karimpour et al., 2012; Zarrinkoub et al., 2012). The Lut Block has a great potential for the discovery of new mineral deposits, like the Mahrabad and Khonik porphyry copper-gold deposits (Malekzadeh shafarodi, 2009), the Dehsalam porphyry copper deposit (Arjmandzadeh, 2011), high sulfidation epithermal gold deposits such as Chah Shalghami (Karimpour, 2005) and IOCG deposits such as Kuh-E-Zar and Qaleh Zari (Mazlomi et al., 2008).
    Materials And Methods
    After field studies of the Garmab area, 32 thin sections and 21 polished sections were prepared for petrological and mineralogical studies.In addition, 10 least-altered and fractured samples of volcanic rocks were selected for geochemical studies. Major oxides were determined using XRF analyses at the Zarazma laboratory. Induced polarization and resistivity geophysical data were collected and correlated with geological and alteration maps. The geophysical datawere collectedfrom 420 individual points, using a dipole-dipole arrangement along five profiles separated 60m apart.This covered the study area entirely. After a change in the mineralization trend was observed,additional profileswere designed, twoon bearings of 25º and three on 75º.
    Results
    The Garmab volcanic rocks exhibit typical geochemical characteristics of subduction zone magmas including strong enrichment in LILE and depletion in HFSE. Based on the discrimination plot of Irvine and Baragar (1971), all samples belong to the calc-alkaline series, and based on the TAS diagram of Cox et al., 1979, the volcanic ore host rocks of Garmab range from andesite to basaltic andesite to trachyandesite.
    Hydrothermal alteration, associated with deposition of copper sulfide mineralization, occursmostly along the fault zones. .Mineralization also occurs disseminated and as veinlets, restricted to uppermost parts of the volcanic sequences. The deposit has the form of a layer of supergene enrichment characterized principally by chalcocite as the main ore mineral accompanied by digenite, covellite, bornite and chalcopyrite.
    The locationof the anomalies has been determined from their medium chargeability and low to medium resistivity values. This can be attributed to the presence of sulfide minerals in the mineralized zones. The average sulfide mineral grain size was determined using the results of time constant parameter. Since the results of raw data do not indicate accurate information about the depth and geometry of mineralization, smooth inverse modeling was applied to determine probable zones and vertical and horizontal extension of mineralization.Geophysical studies show that zones of mineralization are small and scattered.
    Keywords: Induced polarization (IP), Resistivity, Smooth inverse modeling, Copper, Qaen
نکته
  • نتایج بر اساس تاریخ انتشار مرتب شده‌اند.
  • کلیدواژه مورد نظر شما تنها در فیلد کلیدواژگان مقالات جستجو شده‌است. به منظور حذف نتایج غیر مرتبط، جستجو تنها در مقالات مجلاتی انجام شده که با مجله ماخذ هم موضوع هستند.
  • در صورتی که می‌خواهید جستجو را در همه موضوعات و با شرایط دیگر تکرار کنید به صفحه جستجوی پیشرفته مجلات مراجعه کنید.
درخواست پشتیبانی - گزارش اشکال