جستجوی مقالات مرتبط با کلیدواژه "حسگر بیشینه دما" در نشریات گروه "فیزیک"

At present, Maximum Temperature Crystal Sensors (MTCS) are of great interest in the design and optimization of engines and turbines with high efficiency. These sensors are made in very small dimensions and can measure the maximum temperature in the desired location, for example inside the turbine. It is worth mentioning that a high fluence of fast neutrons is required to produce these sensors. The MTCS method is based on the high temperature phenomenon to restore changes made in the crystal lattice caused by neutron irradiation. Calculations of the maximum fast neutron flux for the diamond sample were performed using MCNP6 with the simulation of the core of the Tehran Research Reactor (TRR). Activity calculations were done using ORIGEN2, dose rate calculations through MCNP6, and temperature calculations with ANSYS software at different points of the sample. The highest fast neutron flux was calculated, and the activity of the sample decreased significantly after 40 days, with the dose rate at a distance of one meter reaching 1.4 µSv/h. Temperature calculations showed that the maximum temperature at the lowest speed of the channel was 402 K, which would not cause any thermal problems. Additionally, using the X-Ray diffraction (XRD) method, the lattice number and unit cell volume were calculated for the sample. The results obtained suggest that the diamond sample, from the perspective of neutronics, dosimetry, thermohydraulics, and changes in crystal lattice structure, can be recommended as a crystal sensor in the Tehran Research Reactor.