جستجوی مقالات مرتبط با کلیدواژه « pile setup » در نشریات گروه « عمران »

Evaluating the ultimate bearing capacity of piles has been always an important concern for geotechnical engineers. Pile setup is a term which refers to an increase in bearing capacity of pile after a specific time. This increase is mainly considered relevant to the dissipation of excess pore water pressure created as a result of disturbance of the soil around the pile. Many researches have been centered on the investigation of pile setup and the factors influencing that. Results indicate that soil and pile properties can affect the occurrence and intensity of this phenomenon. The application of artificial intelligence such as artificial neural networks and evolutionary algorithms are considered as efficient and powerful methods for prediction and function finding purposes. Group Method of Data Handling is an intelligent approach that operates in a similar pattern to artificial neural networks. In this system, dual combinations of input variables are created in the form of Kolmogorov-Gabor polynomials. Based on the evaluation criteria such as Root Mean Squared Error (RMSE) and determination coefficient (R^2), the polynomials with higher accuracy are selected and introduced to the next layer as inputs. This repetitive approach is used to reach the best polynomials predicting the target variable of the project. GMDH is a self-organized system in which the number of required layers and neurons are determined during the running process. In this paper, a dataset obtained from the literature review and contains information about 170 test piles derived in clay and mixed soil, is used in which the ultimate bearing capacity is considered as a target, while the other ones are independent variables. It is noticeable that to evaluate the efficiency of the ultimate model, data is randomly divided into training and testing data which the former includes 118 and the latter has used 52 data. The results of this study indicate that the initial bearing capacity of pile (End Of Driving) and undrained shear strength ( S_u) have a significant effect on the time-dependent increase in bearing capacity of pile. The ultimate model obtained from the GMDH system with the RMSE of 742.85 and the (R^2) of 0.768 is an acceptable equation that can be used in the process of pile design.