جستجوی مقالات مرتبط با کلیدواژه « Fiber » در نشریات گروه « صنایع غذایی »

In this research, mantle flour and elderberry kernel were used to increase the nutritional properties and fiber of ice cream. Elderberry mantle and core were separately converted into flour, added to ice cream at levels (2, 1, and 3%) and its physicochemical properties such as: viscosity, aurran, colorimetry were investigated and the best treatment was determined during the sensory evaluation. The physicochemical results of ice cream containing elderberry flour (shell and core) showed: increasing the percentage of elderberry core and mantle caused a decrease in pH. The lowest pH value was related to the sample containing 3% kernel flour and the highest pH value was related to the control sample. The highest amount of viscosity (1327.5 centipoise) was related to the treatment of 3% elderberry mantle flour and the lowest amount was related to the control sample. The highest specific weight (1.15) was related to the treatment of 2% and 3% of elderberry mantle flour and the lowest amount was related to the control sample. Also, the highest coefficient of volume increase was observed in the control sample (38.97%) and the lowest overrun was observed in the sample containing 3% of Sanjad mantle flour. With the sensory evaluation, the treatment containing 2% elderberry kernel flour was more acceptable than other treatments.

In this paper, the possibility of producing sponge cake by replacing triticale flour (TF) (0-30%) and beta-glucan fiber (BG) (0-10%) was investigated by utilizing a two-level factorial design containing central points. According to the results, by increasing TF and BG replacement ratio in the cake formulation, moisture content, water activity, ash, fiber, and antioxidant capacity increased, whereas carbohydrates, calories, and lightness of cases decreased. Moreover, the specific volume of cakes in those samples containing TF decreased, while adding the BG fiber can lead to improving it. Meanwhile, as BG and TF levels increased, the hardness of the samples increased while their cohesiveness and springiness decreased. On the other hand, BG replacement did not have a significant effect on the chewiness and gumminess, whereas TF may lead to increasing them. The overall acceptance of the samples increased with the simultaneous replacement of TF and BG. Furthermore, the numerical optimization confirmed that it is possible to produce enriched and desirable cakes via high utility through a combination of 30% TF and 8.3% BG.

Bread is one of the foods that is dominant food of the people. Among the bread consumed, sangak bread is important because of its nutritional value. Oleaster is a substance with the scientific name of Elaeagnus angustifolia and belongs to the Elaeagbaceae family. This fruit has a wide nutritional value and recent research indicates its therapeutic properties. This fruit is widely used in the food industry. In this research, physicochemical and rheological properties of sangak bread whit oleaster flour were evaluated. In this study, zero, 5, 10 and 15% of oleaster flour were used in the formulation of sangak bread and during storage for 6 days, some of qualitative characteristics were measured and compared to control sample. These properties included: moisture percent, pH, acidic value, total phenol, protein, total sugar, fiber, wet gluten, sedimentary number and rheological tests of dough. The results showed that an increase in the percent of oleaster flour led to an increase in total sugar, protein content, total phenol, fiber and acidity as well as a decrease in the pH. Also, its rheological properties such as water absorption percentage (due to the presence of fiber in oleaster flour) and the stability of the dough increased, also the development time and the softening degree of the dough decreased, which indicates the high tolerance of the dough for fermentation. The results of this study showed that by adding oleaster flour up to 15% in the sangak bread formulation, a product with high nutritional value can be presented to the consumer market.

Mayonnaise is one types of sauces that has always been loved and preferred by consumers because of its unique texture and taste. Sauce is a semi-solid or liquid food ingredients that consists of emulsifying edible vegetable oils (at least 66%) in a liquid phase including vinegar, water, lemon juice, and egg yolk (Bortnowska and Makiewiewicz, 2006). According to the National Standard of Iran (No. 2454), if the amount of fat in mayonnaise is reduced by at least 25% (from 66% of fat), it is considered reduced fat mayonnaise, and if it is reduced by 50% in fat, mayonnaise is considered low-fat. (National Standard of Iran 2454, 1394). Fibers are edible parts of plants or similar carbohydrates that cannot be absorbed in the gut and only irritate the gut. Dietary fiber contains polysaccharides, oligosaccharides, lignin and related plant materials. Dietary fiber intake can reduce the risk of cardiovascular disease, high blood pressure, diabetes, obesity, cancer and some gastrointestinal disorders. They can alter tissue properties, eliminate hydration, stabilize high-fat foods and emulsions, and improve shelf life (Zhang et al., 2017). Barley (Avena sativa L.) is an important crop with about 21 million tons annually production worldwide. The seed has been used to raise public awareness about the health benefits of beta-glucan, which helps lower blood cholesterol and glucose levels. Protein is the second most abundant element (12 to 20%) in barley after starch, which contains organic amino acids, due to its high lysine content because globulins make up 70 to 80% of total barley protein. Alcohol-soluble prolamins, on the other hand, are the main storage proteins in other cereals (Nito et al., 2015).

 In this study, nitrate, ethanol, methanol, chloroform, ethylene glycol and acetic acid were prepared from Merck Company (Germany) and sunflower oil from Rana Company, vinegar from Somayeh Company, salt from Aali Company, sugar from Pardis Company, mustard from Bijan Company and Barley Malt Pulp was prepared from Behnoosh Company. Chemical extraction method was used to extract fiber. (Salehifar and Fadai Noghani, 2013). To prepare the mayonnaise samples, the powder ingredients including salt, mustard and sugar, vinegar and water were first mixed well and uniformly with a mixer (IKA WERK, Germany). Then, according to the formulation, the fiber extracted from barley malt pulp was gradually added to the above mixture, which was stirring, and the eggs were added to the mixture and mixed thoroughly to obtain a uniform composition. At this stage, the oil was added dropwise with continuous pouring. Finally, the samples of mayonnaise prepared were kept at refrigerator for further analysis. In all samples, the amount of sugar (11.5 g), white vinegar (23.1 g), eggs (39.45 g), salt (4.50 g), water (24.6 g) was constant (Bostani et al., 2011). In this study, in order to reduce the amount of oil, it was replaced with fiber extracted from barley malt pulp at five levels of 0, 5, 10, 15 and 20% (w / w).

 The effect of replacing different percentages of fibers extracted from barley malt pulp with fat at levels (5, 10, 15 and 20%) on physicochemical properties (fat, fiber, ash, viscosity and colorimetry (L*) a*, b*) and sensory characteristics (taste, smell, color, texture and general acceptance) were determined using analysis of variance at 5% probability level. Various properties of low-fat mayonnaise showed that as the percentage of barley malt fiber increased, the amount of fat, radiance and yellowness in low-fat mayonnaise treatments (P <0.05) decreased, and the addition of fiber increases the viscosity, fiber, ash and redness of mayonnaise, treatments (P> 0.05) as well as protein content. In the treatments, which was statistically significant (P> 0.05), the results of sensory evaluation of mayonnaise samples showed that the addition of fiber extracted from barley malt pulp resulted in a significant reduction in taste, texture, color and the general acceptance of mayonnaise samples (P <0.05), while the decrease in odor score was not statistically significant (P> 0.05), so that the treatment containing 20% barley malt fiber had the lowest sensory score (taste). Smell, texture, color, acceptance k Li) and treatments containing 5 and 10% barley malt fiber received the highest sensory scores (taste, odor, texture, color, general acceptance) from the panelists.

 According to the results, treatment 3 (containing 10% barley malt fiber) was introduced as the best treatment in the present study.

Fibers obtained from the waste of fruits and grains are valuable sources in the preparation of various useful products such as yogurt. Considering the importance of consuming fibers in providing health, the purpose of this research was to investigate the physicochemical, textural and sensory properties of fat-free yogurt enriched with bamboo fiber. For this purpose, bamboo fiber was added to fat-free yogurt with percentages of 1, 2, and 3 %, and experiments including pH, acidity, total dry matter, syneresis, viscosity, colorimetry, and sensory evaluation were carried out during 3 weeks of storage in the refrigerator (4±1 °C). Produced samples were compared with fat-free yogurt and high-fat yogurt without fiber additives. Data showed that the addition of fiber to the yogurt samples significantly increased (P<0.05) the amount of acidity, total dry matter, viscosity, color index LÛ, aÛ and bÛcompared to non-fat and high-fat control samples. In addition, the results showed that the addition of fiber in yogurt samples significantly (P<0.05) reduces the syneresis, so that the non-fat control yogurt with 12.3% and the sample containing 3% fiber with 8.58 % showed the highest and lowest syneresis on the first day of production, respectively. In the sensory evaluation, the sample containing 2% bamboo fiber with the highest score was introduced as the best sample. Therefore, the application of bamboo fiber with a concentration of 2%, in addition to improving the textural, physical and chemical properties of yogurt, can also lead to consumer satisfaction. Hence, bamboo fiber can be used in the formulation of dairy products, including yogurt.

Ajowan (Carum copticum) is a flavoring plant, which the seeds contain important chemicals such as thymol, carvacrol, terpinene, cymene and myrcene belonging to the group of phenolic compounds with distinct antimicrobial and antioxidant properties. Therefore, the objective of this study was to incorporate different contents of Ajowan seed powder (ASP) in formulation of chocolate cream to enhance its functional and antioxidant properties. For this purpose, ASP was added to the chocolate cream at levels of 0, 1, 2, 3, 4, and 5% (w/w). Nutritional characteristics including the amount of dietary fiber, polyphenolic compounds, antioxidant activity, technological and sensory characteristics such as spread ability, firmness, peroxide value, color, taste, mouthfeel and overall acceptance of the chocolate cream were examined. The results indicated that with the addition of ASP the amount of fiber, polyphenols, acid-insoluble ash and antioxidant capacity were significantly (p< 0.05) increased significantly compared to those measured in control. During the 75 days of storage, peroxide value was significantly (p < 0.05) decreased in the fortified produce with 5% ASP compared to the control. Nevertheless, sensory evaluation showed that increasing ASP level more than 3 % (w/w) led to decrease in overall sensory acceptance due to the fact that flavoring compounds of ASP would interfere in product taste and flavor.

In recent years, the non-destructive and fast method of image processing has been successfully used for quantitative and qualitative evaluation of the characteristics of food products. In this study, the effect of sugarcane bagasse as a source of fiber enrichment (0-25%), soybean water-soluble polysaccharide (0-2%) and frying time (2-5 minutes) on the image characteristics of donuts such as color, number , density and size of bubbles, porosity, energy, homogeneity, contrast and entropy were investigated. The findings of this research showed that the increase of sugarcane bagasse fiber increases the a* index and decreases the L* and b* components of the crust and crumb and porosity. On the other hand, increasing the frying temperature increases the redness of the crust and decreases the lightness of the crust and the porosity of the texture. Meanwhile, the polysaccharide soluble in soybean water had no significant effect on the characteristics of the treatments. The optimization results also showed that if 8.58% sugarcane bagasse and 0.36% soybean soluble polysaccharide are added to the formula and the sample is fried within 5 minutes, the best quality will be obtained.

Ice cream is one of the most popular dairy desserts in the world. In recent years, the reduction of fat and fiber intake in dietary products has received much attention. Citrus peel is a valuable source of dietary fiber that is usually discarded as waste. In this research, the fiber extracted   from Citrus uranium L. peel was used as a novel fat replacer in light vanilla ice cream.

3 levels of Citrus uranium L.  Fiber (0.5%, 1%, and 1.5%) were added to low fat vanilla ice cream formulation.  The physical, chemical and sensory characteristics of low fat vanilla ice cream were investigated.

The results of this study showed that addition of fiber had a significant effect on the physical properties of ice cream including viscosity and overrun. As the fiber levels increased, the viscosity, melting resistance and overrun of the treatments increased. The effect of fiber on the ice cream pH was significant (P <0.05), with increasing fiber levels, the pH of treatments decreased.Data showed that the effect of citrus uranium L. fiber on all factors of ice cream sensory evaluation was significantly different (P <0.05).Based on the results obtained by increasing the percentage of fiber, the highest score in sensory tests was obtained in treatment 2 (containing 1% fiber). The lowest was for treatment 3 (containing 1.5% fiber).Overall, the results showed that fiber can be used to produce low-fat ice cream with appropriate physico-chemical and sensory properties.Keywords: low fat ice cream, fiber, physico-chemical properties, sensory evaluation.

Fruit fibre have better quality due to higher total and soluble fibre content, water and oil holding capacity and colonic fermentability, as well as lower phytic acid content and caloric value (Sharoba et al., 2013). In the fresh mass of the pumpkin (Cucurbita moschata), total carotenoid content, a major contributory factor in the high nutritional value of pumpkins, ranges from 2 to 10 mg/100 g, the content of vitamins C and E accounting for 9–10 mg/100 g and 1.03–1.06 mg/100 g, respectively (Hosseini Ghaboos et al., 2016; Nawirska et al., 2009). Pumpkin fruit is also a valuable source of other vitamins, e.g., vitamin A, B6, K, thiamine, and riboflavin, as well as minerals, e.g., potassium, phosphorus, magnesium, iron and selenium (Mirhosseini et al., 2015; Obradović et al., 2015). Since pumpkin is a valuable micronutrients source, dried pumpkin could be processed into powder for foods to increase fibers, vitamin A and mineral contents. In addition, pumpkin powder can be used in bakery products because of its highly-desirable flavour, sweetness and deep yellow-orange colour (Salehi, 2020). The influence of replacement of wheat flour with pumpkin powder (at five levels of 0, 2.5, 5.0 7.5 and 10 %) on textural properties and sensory qualities of biscuit was studied by Kulkarni and Joshi (2013). As the replacement level of wheat flour with pumpkin powder increased, the firmness and fracturability values were increased. Biscuits with more pumpkin powder had a more yellow colour than those with less pumpkin powder. According to the sensory evaluation results, biscuits containing 2.5 % dried pumpkin powder had the highest total acceptance score. The iron and β-carotene content of biscuits increased with increasing pumpkin powder levels. Spinach is a good source of minerals (Fe, Mn, Zn and Mg), vitamins (E, A, C, K, B1, B6 and B2), protein, fibers and antioxidants, making it a suitable ingredient to be used in the formulation of food products with high nutritional and biological values (Slavin and Lloyd, 2012). El-Sayed (2020) studied the effect of spinach nano-powder (0.5-2%) addition on the quality of ultra-filtered soft cheeses. The author demonstrated that by increasing of spinach powder concentration with retentate, the content of fibers, minerals, total phenolic content, and antioxidant activity of samples was enhanced. In this study, pumpkin and spinach powders were used to improve and enhance the quality of sponge cake due to their high nutritional value, fiber, β-carotene and minerals (calcium and iron).

At first, the pumpkin and spinach were dried and powdered in controlled conditions. Fresh pumpkins (Cucurbita moschata) were purchased from local market. The pumpkin slices with 5 mm thickness were dried in an oven (65°C). The dried pumpkins were milled, powdered and passed thru a 125 mesh screen (Hosseini Ghaboos et al., 2016). The ingredients used in the formula of sponge cakes were cake flour (100 g), sucrose (70 g), sunflower oil (60 g), fresh eggs (70 g), whey (4 g), baking powder (1.5 g), vanilla (0.5 g), water (40 g) and nonfat dry milk (20 g) powder. Sucrose and sunflower oil were poured into a bowl, and mixed for 10 min. Whole egg was added to the bowl, and then mixed for 4 min. The sifted cake flour, whey, baking powder, vanilla, water and nonfat dry milk powder was gradually poured into a bowl, and mixed for 3 min. Water was added to the bowl, and then mixed for 1 min. For each cake, 45 g of cake batter was poured into a cake pan and baked at 195°C for 25 min in a oven toaster. The cakes were allowed to cool for 20 min, and then were removed from the pans. The cooled cakes were packed in polypropylene bags at room temperature before physico-chemical and sensory evaluation analyses. The test sponge cake samples prepared with 0% (control), 5%, 10%, 20 and 30% replacement of cake flour with blend of pumpkin and spinach powder. The blend of pumpkin and spinach at concentrations of 0, 10, 20 and 30% were used in sponge cake formulation and the dough viscosity and physicochemical, color, texture and sensory properties of the product were studied. The texture profile analysis of sponge cake samples from the midsection of the cakes were performed using a texture analyzer (TA-XT Plus, Stable Micro Systems Ltd., Surrey, UK) with a 36 mm diameter cylindrical probe, 50% compressing and a test speed of 1.0 mm s−1 . The crust of cake samples was removed in cake texture determination. A double cycle was programmed and the texture profile was determined using Texture Expert 1.05 software (Stable Microsystems). Other parameters were defined as: pre-test speed 2.0 mm s−1, post-test speed 2.0 mm s−1 and trigger force 5 g. The texture parameters recorded were firmness, cohesiveness, springiness and resilience, and the texture parameter of cake was averaged from 3 replications. Statistical analysis was performed in factorial arrangement based on completely randomized design and comparing was performed at the average at 5% level using Duncan's multiple range test.

With increasing percentage of pumpkin and spinach powder in sponge cake formulation showed that fiber, iron and calcium percentages of samples were increased from 1.60 to 10.04%, 9.78 to 50.93 ppm and 0.19 to 0.42, respectively and there was a significant difference between treatments (p < 0.05). Also, β-carotene, protein, moisture and density of cakes increased significantly with increasing percentage of powder replacement (p < 0.05). By increasing the percentage of substitution of powders in sponge cake formulation from 0 to 30%, the viscosity of cake batters at shear rate of 90 s-1 was significantly increased from 16.72 to 30.82 Pa.s (p < 0.05). According to the results of image processing, as the percentage of pumpkin and spinach powder increased in the formulation, the a* index decreased and became negative indicating that the samples became greener with increasing replacement percentage.

The firmness of cakes enriched with pumpkin and spinach powder was obtained in the first day and on the 14th day in the range of 2.071-5.427 N and 3.354-6.207 N, respectively. Based on the sensory evaluation results, the sample containing 20% pumpkin and spinach powder had the highest overall acceptance score.

The purpose of this study was investigating the effect of wheat flour replacement with triticale flour (0-30%) and β-glucan fiber (0-10%) on physicochemical, texture and sensory properties of Barbari bread with using of two-level factorial design containing central points based on D-optimal. The results showed that with substitution of these two factors, the water activity, moisture and ash content in bread samples significantly increased and the fat, carbohydrate and calorie of the samples decreased. Antioxidant capacity and protein of samples increased with replacement of triticale flour. However, high levels of β-glucan decreased the protein and antioxidant capacity of the samples. Also the fiber content of samples decreased and increased with addition of triticale flour and β-glucan, respectively. The effect of replacement of triticale flour on the specific volume of bread was dependent on the amount of β-glucan; so that the specific volume of bread with replacement of triticale in the samples without β-glucan significantly decreased but it increased in the samples containing high levels of β-glucan. Loss weight, crust and crumb color, firmness and penetration energy of bread were not significantly affected by the substituted factors. According to the sensory evaluation, the replacement of triticale flour and β-glucan increased the flavor score and overall acceptance of barbari bread samples. According to the results, bread samples enriched with 30% triticale flour and 10% β-glucan have desirable physicochemical, texture and sensory properties and are recommended as optimum samples for production.

Snack foods contain main parts of food habit among people in the world. Recently the high rate of consumption and variety of extruded snacks is proven to increase the attention to nutritional quality besides keeping desired acceptability of products. In this study, based on central composite design the effect of independent variables consist of the whole Oleaster powder (5- 15%), moisture content (12- 20%), screw speed (120-180 RPM), were investigated on the physicochemical, textural and color of extrudates based on corn- wheat grit. results showed that, Increasing Oleaster content caused an increase in the density, hardness and solubility. Whereas, Increase screw rate and oleaster content simultaneously leaded to a lower density. In low amount of moisture content, improvement of oleaster content didn’t significant effect on hardness. However by boosting recent factors gradually, the hardness of products increased dramatically. Moisture content and screw speed had absolute effect on lightness of extrudates. Meanwhile improvement of oleaster content caused a decrease in lightness. Optimum condition was determined to be the feed moisture content (13.87%), oleaster content (5%) and screw speed rate (166.7 rpm).

In recent years, legumes have been highly considered as a good source of protein, fibers, minerals and other bioactive compounds in order to develop novel foods with improved nutritional properties. There is some evidence that legume consumption reduces the risk of diabetes, cardiovascular disease and some cancers. Vicia faba has about twice protein content as cereals and can be a good alternative to meat and protein-rich ingredients. It should also be noted that the amount of insoluble fiber is higher than soluble fibers in legume. Vicia faba belongs to the Fabaceae family .Vicia faba contains high protein (21-41% dry content of the bean), carbohydrates (51-68% dry content of the bean), fiber (5-5.8%), B-vitamins and minerals. Recently, the protein function of Vicia faba, especially its protein isolate, has been studied on a laboratory scale for use in food products, due to its good ability in hydration, solubility, emulsification, viscosity, and foam and gel formation. Research has also shown that the protein in Vicia faba has better ability to emulsify water and oil and foaming capacity and foam stability compared to bean and pea flour. The structural and functional properties of the protein isolates and concentrates of legumes such as Vicia faba are strongly influenced by their preparation, extraction and drying methods. One of the ways to improve extraction and optimization of protein properties can be ultrasound and an enzymatic controlled hydrolysis. Due to the importance of dietary fiber, various methods have been developed for their decomposition, many of which are very precise and special, some of which have high-purity enzymes and selectively release oligosaccharides and polysaccharides containing dietary fiber. In this  study, the possibility of using ultrasound and limited enzymatic hydrolysis in order to produce value added product and increase the extraction efficiency and improve the functional properties of protein and fiber of Vicia faba, were evaluated.

In this study, ultrasound and enzymatic hydrolysis were used to optimize extraction and modify physicochemical properties of protein and fiber of VaciaFaba. The proteins were affected by ultrasound at 200, 300 and 400 W for 15, 25 and 35 minutes, and the Alcalase enzyme 2.4 LFG at 0.15, 0.3 and 0.45% doses were extracted at 15, 25 and 35 minutes and the design of the treatments was done by Designer Express software. Solubility, oil absorption capacity, emulsification and zeta potential of protein samples were measured. Vicia faba fiber extraction under alkaline conditions was obtained from solutions of 0.0012, 0.012 and 0.12% sodium hydroxide until reaching pH 12, 11 and 10 and Termamy 2x enzyme was used for enzyme hydrolysis. Water retention capacity and rheological properties of Vicia Faba fiber samples were investigated.

The results showed that the use of ultrasound and enzymatic hydrolysis had a positive effect on solubility, oil absorption capacity and emulsion properties of the protein samples. Zeta potential was also negative for all treatments, which indicates that the Vicia faba protein treatment solution contains more negative amino acids than positive-loaded amino acids. Among the fiber samples of the ViciaFaba, a fiber sample with a pH of 10 had the highest water retention capacity and G-level than the other two samples, indicating a more solid and elastic quality. Also, in all fiber samples, increasing cutting speed reduced the viscosity and the samples showed a dilution action with cutting or pseudoplastic.

Pomegranate peel, a waste generated from fruit processing industry, is known as a potential source of bioactive ingredients such as polyphenols, minerals and fibers. In this study, the chemical composition and functional properties of pomegranate peel powder (PPP) were determined and it was applied as a substitute of wheat flour in formulation of sponge cake at five levels of 1.5, 3, 4.5, 6 and 7.5% and two particle sizes of 210 and 500 microns. Then, the physical properties of the batter and the chemical, physical and sensory properties of the resulting sponge cake were examined. The chemical analysis of PPP showed that this powder was high in fiber, minerals especially potassium and calcium, and phenols. By increasing the PPP level and decreasing its particle size, batter consistency and density, as well as cake specific volume and symmetry index were significantly increased, while the porosity of the cake decreased. The chemical analysis of the cakes also showed a significant increase in the moisture content, ash, total fiber, and the decreasing trend of the protein, carbohydrate and energy content by increasing the percentage of PPP. In addition, samples containing higher levels of PPP had a lower L * index and higher a * and b * indices and were, therefore, darker, more reddish and yellowish. According to texture analysis, cakes with a higher percentage of PPP had more hardness and gumminess, and less cohesiveness. Based on the sensory analysis, the closest sample to the control was a cake containing 1.5% PPP with a particle size of 500 microns. Overall, it can be concluded that replacing less than 4.5% PPP can produce a cake with good quality properties and higher nutritional value.

Melon seeds are nutritious grains that can prevent cardiovascular diseases and cancer due to its high levels of protein, omega-3 fatty acids, minerals, and dietary fiber. In this study, melon seed flour was added to the bread formulation at six levels of 0, 5, 10, 15, 20 and 25%. The results of physicochemical evaluation showed that the amount of protein, ash, bread fats, bread fibers and b* component significantly increased with increasing the amount of melon seed flour, while the moisture content of bread and color component L* decreased significantly compared to the control. From the point of specific volume and porosity of breads containing melon seed flour, the results showed no difference between control and the sample containing 10% of melon flour, but a significant decrease in those properties was noticed in samples containing 15, 20 and 25% melon seed flour, compared to the control sample. In texture evaluation of the samples, the results showed similarity between breads containing 10% and 15% of melon seed flour with control sample; the samples containing 5% of melon seed flour had harder texture than that of control sample and the samples containing 20% and 25% of melon seed flour possessed softer texture than that of control sample. In terms of general acceptance, breads containing 10 and 15 percent of melon seed flour were similar to the control sample. Therefore, adding 10% of the melon seed flour to the bread can improve the nutritional value of the bread while preserving the quantitative and qualitative properties of bread.

Polycyclic aromatic hydrocarbons (PAHs) and heterocyclic aromatic amines (HCAs) are carcinogenic compounds formed while beef patties are cooked. The current study aimed to evaluate the effects od wheat fiber (1% and 2%), and the mixture of xanthan and guar gums (0.5%) on the PAHs and HCAs formation in the grilled beef patties. According to results, the application of wheat fiber, xanthan and guar gums in the formulation of beef patties significantly decreased moisture, fat and protein content, compared to the control. The pH values of treatments significantly increased compared to the control as a result of the application of wheat fiber and xanthan and guar gums. PAHs and HCAs levels in all treatments significantly decreased compared to the control. The highest reduction in these compounds was related to BkFA (42%) and IQ (74%). Generally speaking, the treatments consist of wheat fiber with xanthan and guar mixture selected as the beat samples.

Donuts are a sweet snack that is typically fermented and dipped in fry. Therefore, its problems include absorbing a large amount of oil, which must decrease by inventing of some methods. In this study, the effect of orange pulp powder in the range of 0 to 12.5 percent and xanthan hydroquinone in the range of 0 to 1.5 percent on Donut characteristics were investigated using response surface method. The results represented that by increasing the amount of orange pulp powder as a source of soluble and insoluble dietary fiber, which contains pectin and cellulose and xanthan gum, the moisture content, ash, fiber, density, yellowness and redness of donuts crust and crumb of the product, contrast, correlation, entropy, hardness, gumminess, chewiness, total acceptance increased , however, fat absorption, lightness of donuts crust and crumb, homogenecity, softness, cohesiveness, porosity significantly decreased. The result indicated that replacing 10.73 percent of orange pulp powder and 0.04 percent of xanthan gum will reduce the absorption of oil, increase fiber and produce healthy donuts

Since the amount of fiber consumption in Iran is less than 30 grams per day, it prepare the ground for cardiovascular diseases, diabetes and cancer. Therefore, given the per capita consumption of bread, this study was designed to optimize the bread formula enriched with sugarcane bagasse. For this purpose, FSB in four levels of 0, 5, 10 and 15% and xanthan gum in four levels of 0, 0.5, 1 and 1.5% (w/w based on flour) were added to the formula of bread. The results indicated that adding FSB to the formula, caused the rheological properties to improve. This is despite the fact that the volume of all types of breads decreased. Also, Sensory evaluation shows that increasing the amount of FSB in the samples causes a drop in the porosity, chewiness and texture of the bread, but samples enriched with FSB had the best smell and taste. The overall assessment suggests that the texture of breads enriched with FSB is much softer than the control sample. During the storage, this situation continued, and delayed the bread stalling. In general, the study of the properties of flour, dough and bread indicated that adding FSB in the range of 5 to 10% (without xanthan gum) is suitable for the production of functional bread.

Cake is one of the most important and widely used cereals and a product of wheat flour. Usually, high-calorie in a variety of cakes is attributed to oils, eggs and sugar in their formulation. Nowadays, the risk of cardiovascular diseases is increasing in most parts of the world and the demand for using the low fat and low cholesterol foods is increasing due to the relationship between excess fat and various diseases. Therefore, it seems that the partial or complete removal of oil and egg and replacing them with other substances in the formulation of the cake is very important. In recent years, the use of dietary fiber of different sources in food products is increasing due its beneficial effects on human health. Among agricultural products, the residues from the processing of oranges are rich in fiber that can be used as a dietary fiber in the food industry. Fiber is a general term for many different types of carbohydrates that is obtained from plant cell walls and is not decomposed by digestive enzymes in the human body. Formulating the food with citrus fiber could be very beneficial since the exisence of a variety of fiber compounds in the peel of citrus with neutral pH that the property may leads it to be widely used in a variety of foods. Others advantage is that it lead to improve the cooking performance, increase the water binding capacity, the oil absorption and improve the final texture of product with lower costs.
In this study, the use of citrus fiber was studied in order to improve the structure and nutritional properties of muffin with a new formulation. In this regard, the orange fiber at three levels (0.5%, 1% and 2%) and with 25% of decrease in oil and egg was used in the muffin production process. In this study, the raw materials, including null flour, sugar, liquid oil, eggs, milk, salt, vanilla, baking powder and orange fiber were prepared from France ID Food Company. Two-step mixing method was used to prepare the dough. The cakes were placed at 180 ° C for 30 minutes. In all tests, the control treatment with code T, treatment containing 0.5% of orange fiber with code T1, treatment containing 1% of orange fiber with code T2 and treatment containing 2% of orange fiber with code T3 were determined. First, the chemical tests including moisture, ash, fiber and pH were conducted on the wheat flour. Then, viscosity determination was carried out usinga Brookfield viscometer, Also the density measurement performed on the muffin cake dough. Afterwards, the production of different treatments, the chemical tests including moisture, ash, fiber and pH as well as the staling tests were performed by two sensory and instrumental methods by Instron device and also the organoleptic characteristics (volume, crack, balance of shape, taste and aroma, chewiness, apparent texture, uniformity of pores in the cake center and the color of cake center and the outer shell) were conducted by using five senses on the produced Muffin Cake according to the standard method.
For statistical analysis of data from physicochemical and sensory tests, completely randomized design and data from staling test from factorial experiment in a completely randomized block design was used and the mean comparisons were conducted by Duncan's multiple range test at probability level of 1% (α=1%) and by using SPSS software, version 16. Considering the results of viscosity and density of the muffin cake dough, the highest amount of viscosity and density belonged to the treatment containing 2% of orange fiber (T3) and control (without orange fiber). The highest percentages of moisture, ash and fiber were calculated for the treatment T3 and the lowest amounts were calculated for control. Also, the highest and the lowest amounts of pH were observed in the treatments of control and T3, respectively. Also, considering the results of staling test by both sensory and instrumental methods and in the intervals of 24, 48 and 72 hours after baking and in all time periods of treatment T3 had the highest score of freshness (delay in staling) and the treatment containing 1% of orange fiber (T2), containing 0.5% of orange fiber (T1) and control (T) had the lowest score of freshness, respectively. The control sample had the highest amount of staling in all days and the amount of staling increased in all treatments over time. It is noteworthy that at all time intervals, the control sample had the highest rate of staling and the staling rate increased for all treatments over time. Considering the results of sensory test, T1 was introduced as the best treatment and in most of the organoleptic characteristics such as taste, flavor, uniformity of pores, chewiness, and overall acceptance had no significant difference with the control sample and was the nearest sample to the control and had the highest score and the highest level of consumer acceptance.
The results showed that adding different levels of orange fiber has a significant effects on physicochemical and organoleptic properties of the muffin cake and replacing 25% of oil and egg used in muffin cake with 0.5% of orange fiber is possible and has enough acceptances.

The consumption of dietary fiber plays an important role in the prevention of illnesses such as diabetes type 2, hypercholesterolemia. Dietary fibers are not only desirable for their nutritional properties but also for their functional and technological properties. This study was undertaken to investigate the possibility of alkaline hydrolysis to remove fiber from rice bran.
Material and In this study, the extraction of fiber from rice bran was carried out in the presence of sodium hydroxide as an alkaline media and under autoclave condition. The Response Surface methodology was evaluated by the central composite design (CCD) to build a model based on three variables including the time (X1), temperature (X2) and the concentration of Hydrogen Peroxide (X3) for the extraction of fiber, and water binding and fat binding capacity of produced fiber.
Results showed that the optimum conditions for the maximum production of extracted fiber were 35min, 99.6 °C and 13.47% for time, temperature and the concentration of hydrogen peroxide, respectively. Results indicated that temperature was the most significant factor influencing considerably on fiber extraction and fiber fat binding capacity and none of the parameters had significant effect in the level of (0.05) on the water binding capacity of fiber