Modelling and optimization of parameters affecting the tensile strength and ductility of aluminum-based composite produced by FSA via RSM

Author(s):
Message:
Article Type:
Research/Original Article (دارای رتبه معتبر)
Abstract:

One of the new methods to improve the mechanical properties of surface layers is the friction stir processing (FSP). If the FSP process is carried out with a consumable material, this new process is known as the friction stir alloying (FSA). Therefore in this research, the Al7075 surface composites by using reinforcing particles (Al2O3) were produced based on this process in accordance with the DOE approach. So, the RSM was selected as the experiment design method and variable factors such as: tool rotational speed, tool feed rate, tool shoulder diameter and size of reinforcing particles were determined as the input variables. The results of ANOVA and regression analysis of experimental data approved the accuracy of regression equations and showed that the tool feed rate, tool shoulder diameter and size of reinforcing particles with linear and second-order effects, affect on the tensile strength and ductility of the composite specimens. Also, if the tool rotational speed is set at 800 rpm, increasing the tool shoulder diameter from 9 mm to 15 mm will increase the tensile strength of the composite specimens by 17.97%. In addition, lowering the tool feed rate from 60 mm/min to 20 mm/min and reducing the size of alumina particles from 50 micron to 20 micron, will increase the ductility of composite specimens by 1.85% and 5.04%, respectively. Finally, by achieving maximum value of desirability function (0.915), the optimal condition of input variables was determined. In addition, the optimal condition has been confirmed by implementing the verification test.

Language:
Persian
Published:
Journal of Science and Technology Composite, Volume:7 Issue: 4, 2021
Pages:
1207 to 1216
https://magiran.com/p2251373  
دانلود و مطالعه متن این مقاله با یکی از روشهای زیر امکان پذیر است:
اشتراک شخصی
با عضویت و پرداخت آنلاین حق اشتراک یک‌ساله به مبلغ 1,390,000ريال می‌توانید 70 عنوان مطلب دانلود کنید!
اشتراک سازمانی
به کتابخانه دانشگاه یا محل کار خود پیشنهاد کنید تا اشتراک سازمانی این پایگاه را برای دسترسی نامحدود همه کاربران به متن مطالب تهیه نمایند!
توجه!
  • حق عضویت دریافتی صرف حمایت از نشریات عضو و نگهداری، تکمیل و توسعه مگیران می‌شود.
  • پرداخت حق اشتراک و دانلود مقالات اجازه بازنشر آن در سایر رسانه‌های چاپی و دیجیتال را به کاربر نمی‌دهد.
In order to view content subscription is required

Personal subscription
Subscribe magiran.com for 70 € euros via PayPal and download 70 articles during a year.
Organization subscription
Please contact us to subscribe your university or library for unlimited access!