Treatment Oilfield Produced Water using Coagulation/Flocculation Process (case study: Alahdab Oilfield)
Produced water is a large amount of water wasted throughout the crude oil extraction process, it's a mixture of the well's deposition water and the water of oil wells extraction water. Produced water contains oil, suspended solids and dissolves solid. This study tested produced water collected from Alahdab oilfield/middle oil company for oil content and suspended solid contamination using chemical precipitation and coagulation-flocculation for reinjection and environmental considerations. Coagulation/flocculation is a common method used as primary purification to oily wastewater treatment due to its usability, performance, and low cost. Coagulant experimental was completed by A jar test device, additives of ferric sulfate and aluminium sulfate were in a range about (10 40) ppm, as well as polyelectrolyte- (polyacrylamide) as an additional flocculent in the range (1.5-3) ppm. The results show that ferric sulfate was more efficient at removing turbidity than aluminium sulfate under the same conditions, with the best removal of turbidity at dose concentration 30 ppm of Ferric sulfate and a flocculent dose concentration of 2.5 ppm of polyacrylamide, also with oil content decreasing from 396.71 ppm to 53.56 ppm.
پرداخت حق اشتراک به معنای پذیرش "شرایط خدمات" پایگاه مگیران از سوی شماست.
اگر عضو مگیران هستید:
اگر مقاله ای از شما در مگیران نمایه شده، برای استفاده از اعتبار اهدایی سامانه نویسندگان با ایمیل منتشرشده ثبت نام کنید. ثبت نام
- حق عضویت دریافتی صرف حمایت از نشریات عضو و نگهداری، تکمیل و توسعه مگیران میشود.
- پرداخت حق اشتراک و دانلود مقالات اجازه بازنشر آن در سایر رسانههای چاپی و دیجیتال را به کاربر نمیدهد.