فهرست مطالب

Ultrafine Grained and Nanostructured Materials - Volume:54 Issue: 1, Jun 2021

Journal of Ultrafine Grained and Nanostructured Materials
Volume:54 Issue: 1, Jun 2021

  • تاریخ انتشار: 1400/04/02
  • تعداد عناوین: 12
|
  • Mahmoud Sarkari Khorrami * Pages 1-20
    Severe plastic deformation (SPD) has been one of promising routes to fabricate ultrafine-grained (UFG) materials, especially aluminum alloys. However, the SPD products often suffer from their small size. This issue implies the necessity of welding of UFG aluminum alloys for making them usable in complex, large forms in industries. Among various welding processes, those based on solid state welding seem to be more consistent with UFG materials. This is associated with the instability of UFG materials upon intense heating cycle that is common in fusion state welding processes. Friction stir welding (FSW) as a well-known process in the category of solid state welding is widely used for welding of aluminum alloys. This review paper provides an overview of the state-of-the-art of FSW of UFG aluminum alloys. To do so, specific attention is given to microstructural and textural evolutions, effect of secondary particles, and cooling medium. Applying cryogenic cooling medium as well as secondary nanoparticles could inhibit excessive grain growth in the stir zone, which were beneficial to improve the strength of the stir zone without remarkable decrease in the ductility. These processing routes did not affect the main recrystallization mechanism of the stir zone.
    Keywords: Ultrafine grained aluminum, Friction stir welding, Severe Plastic Deformation, Microstructure, Texture, Electron Backscattered diffraction
  • Akbar Mirzaei, Farzaneh Azadi, Reza Peymanfar *, Mona Yektaei, Shahrzad Javanshir Pages 21-28
    In this research, the dependence of CuFe2O4 particle size on the antibacterial properties was investigated. The morphology of the particles was controlled in the presence or lack of sucrose as a novel capping agent. Antibacterial properties of the CuFe2O4 nanoparticles were evaluated using the PVDF or silicon rubber matrices. The crystalline structures of the CuFe2O4 were confirmed by X-ray diffraction (XRD) patterns. The prepared nanostructures were more dissected using field emission scanning electron microscopy (FE-SEM), Fourier transform infrared (FT-IR), and vibrating sample magnetometer (VSM). Eventually, the copper ferrite particle size effect in PVDF and silicone rubber matrices on the antibacterial activity was investigated. The obtained results revealed significant antibacterial properties for the particles. It was found that decreasing particle size would improve antibacterial properties within both polymeric mediums. This research presents novel separable antibacterial magnetic nanostructure suspended in novel media.
    Keywords: CuFe2O4, Antibacterial activity, Silicone rubber, Polyvinylidene fluoride (PVDF)
  • Aziz Shafiei Zarghan *, Abolfazl Najafi, Seyed Farshid Kashani Bozorg, Abbas Zarei Hanzaki Pages 29-39

    For more than a decade, there has been considerable interest in the fabrication of metal matrix composites by employing Friction Stir Processing (FSP). In this study a new model based on Zener-Hollomon (Z) parameter has been developed, which is believed to be the first of its kind, to accurately predict microstructural characteristics of Al-based composites Additionally, the processing window of composite fabrication determined and revealed that sound samples achieve within the range of 2.42 to 24.61 rev/mm for the ratio of rotation speed to travel speed (ω/ν). Recording the peak temperatures during processing beside the optical and Scanning Electron Microscopic (SEM) studies showed that increasing the number of FSP passes and the ratio of ω/ν have a remarkable influence on bolstering the role of nanoparticles in grain refinement. Results also indicated that the mean grain size of FSPed samples and matrix of nanocomposites decreases with an increase in the Z parameter. Finally, particular equations for various numbers of passes developed, which make a correlation between the grain size of Al-based composites and the FSP parameters via Z parameter.

    Keywords: metal matrix composites, Zener-Hollomon Parameter, Friction Stir Processing, aluminum
  • Sh. Khameneh Asl *, Mehri Maghsoudi, Faezeh Gorbani Pages 40-50
    Highly ordered TiO2 nanotube arrays were synthesized by a two-step anodizing method. Although TiO2 nanotubes have excellent electrical and capacitive properties because they provide a unidirectional path for electron transfer. But these properties can be improved by effective methods such as non-metallic doping or by a conductive polymer. For this purpose, nitrogen and hydrogen doping methods and electrical deposition of polyaniline were used simultaneously to prepare the polyaniline-TiO2, polyaniline/N-TiO2, and polyaniline/H-TiO2 nanotube arrays samples. To evaluate the electrochemical and capacitive properties in more detail, cyclic voltammetry, electrochemical impedance spectroscopy, Matt-Schottky, and galvanostatic charge-discharge tests were performed. The results showed that the composite of TiO2 doped with hydrogen and deposited with polyaniline nanowires had the highest capacitance (5666 µF.Cm-2) at the current density of 100 µA/cm2, approximately 4.5 times more than polyaniline/TiO2 sample. It also has the lowest charge transfer resistance (0.008 Ωcm2) and the highest charge carrier density (1.63×1024cm-3). Increasing the density of charge carriers and decreasing the electrical resistance can be attributed to the fact that the hydrogen doping, the presence of oxygen vacancies, and conductive polymer increase the rate of separation of the charge carriers and decrease their recombination rate. Therefore, the electron transfer rate and the electric current increase.
    Keywords: TiO2 nanotube arrays, Non-metal doping, Polyaniline, EIS, Capacitive performance
  • Zahra Yousefi, Nafiseh Koohestani, Danesh Amiri, Robabeh Abdinia, Ata Kamyabi Gol, Elham Kamali Heidari * Pages 51-57

    Electrospinning, stabilization and carbonization are three steps of synthesizing electrospun carbon nanofibers (CNF), using polyacrylonitrile (PAN) precursor. In this study, the effect of the stabilization temperature was studied on the morphology and chemical state of the electrospun PAN fibers, which were later carbonized to produce carbon nanofibers. the stabilization was carried out on electrospun PAN fibers, at different temperatures of 230 °C, 240 °C, 250 °C and 280 °C for 2h with a heating rate of 2 °C/min. Fourier transform infrared spectroscopy was used to inspect the progress of stabilization reactions. The crystallinity and composition was studied by X ray diffraction and scanning electron microscopy was used to observe the morphology of the fibers. The results showed that 230 oC is the best stabilization temperature in which not only all expected reactions take place but also the fibrous morphology is preserved. Higher temperatures led to destruction of the fibrous morphology.

    Keywords: Electrospinning, PAN, Stabilization, CNF
  • Mahdieh Chegeni *, Mozhgan Mehri, Zahra Shokri Rozbahani Pages 58-63
    The Ag/Co2O3/g-C3N4 as a novel nanocomposite was synthesized using a facile strategy by “one pot” method. The as-prepared nanocomposite was applied to improve the antibacterial effect against Escherichia coli and Staphylococcus aureus bacteria. The nanocomposite was characterized by Fourier transform infrared spectroscopy, X-ray Diffraction, and Scanning Electron Microscopy techniques. The strong interaction beetween the plans of graphitic carbon nitride (g-C3N4) and other particles can be resulted to stable nanocomposite. The zone inhibition of nanocomposite was determined for Gram-positive and Gram-negative bacteria. The findings showed the better activity of as-prepared nanocomposite against Gram negative bacteria rather to Gram positive bacteria. The Ag/Co2O3/g-C3N4 was shown good antibacterial effect compared to g-C3N4 and Ag patricles. Further, Colony Forming Unit was indicated the antibacterial behavior of as-prepared composite. The present study can explain insight into the synthesis of heterojunction composite for disinfection.
    Keywords: Biomaterials, nanoparticles, graphitic carbon nitride, Antibacterial activity
  • Raana Sarvari, Mohammad Nouri, Leila Roshangar, MohammadSadegh Gholami Farashah, Amirhouman Sadrhaghighi, Samira Agbolaghi, Peyman Keyhanvar * Pages 64-72

    Development of biopolymers possessing both biodegradable and electrically conducting properties has attracted a huge interest in the biomedical field. These systems have some benefitials in wound healing and reducing the long-term health risks. In this study, the pectin-polycaprolactone (Pec-PCL) copolymers were synthesized by ring-opening polymerization. Subsequently, the solutions of the synthesized Pec-PCL and homopolyaniline (H-PANI) were blended in various ratios and their conductivity properties were measured by cyclic voltammetry and the composition of 80:20 was selected for electrospinning process because of the suitable electroactive behavior and biodegradability. The morphology, biocompatibility, hydrophilicity, and mechanical properties of the nanofibers were thoroughly investigated. Resulted scaffolds represented a porous structure with large surface area (110–130 nm) and Young’s modulus of 1615 ± 32 MPa, which imitated the natural microenvironment of extra cellular matrix (ECM) to regulate the cell attachment, proliferation and differentiation. The results demonstrated that these electrospun nanofibers could be potentially applied in biomedical such as tissue engineering.

    Keywords: Conductive polymer, Pectin, PCL, Polyaniline, biodegradability
  • Mahboubeh Dehestani, Gholam Khayati *, Shahriar Sharafi Pages 73-84
    A new proposing model based on gene expression programming (GEP) to predict the microhardness of Ni/Al2O3 nanocomposite coating was the subject of the present study. Accordingly, a series of the laboratory experiments was designed by the factorial D-optimal array. This was accomplished by considering the most effecting practical electrodeposition parameters including the amount of Al2O3 nanoparticles in the bath, current density, temperature, magnetic stirring rate, time of stirring, and plating time as the input and the microhardness of the coating as the output of model. Various performance criteria including determination (R2) coefficient, the mean absolute error (MAE), and the root relative squared error (RRSE) were utilized to evaluate the developed models. Finally, the model with R2 = 0.9752, MAE = 0.030 and RRSE = 0.158 was developed as the optimum proposed function. Also, the results of the sensitivity analysis confirmed that the current density was the most effective parameter, while the amount of Al2O3 nanoparticles in the bath, plating time, magnetic stirring rate, time of stirring, and temperature had relatively lower effect. In conclusion, the exclusive features of the GEP simulation have been approved to determine Ni/Al2O3 nanocomposite coatings microhardness.
    Keywords: Ni, Al2O3 nanocomposite, microhardness, Electrodeposition, Gene Expression Programming
  • Elham Montakhab, Fereshteh Rashchi *, Saeed Sheibani Pages 85-92
    Titanium dioxide nanotubes (TNTs) were synthesized via an electrochemical anodization process. The influence of increasing the cathode surface area on the microstructure and order of the final product was investigated. To study the microstructure of the synthesized nanotubes, field emission scanning electron microscopy (FESEM) was employed. The degree of crystallinity and the characteristic of synthesized nanostructure was evaluated by X-ray diffraction (XRD). The porous initiation layer covering the tube-top became thinner and lost its’ integrity, as a consequence of employing a larger cathode. This is due to the enhanced reaction sites followed by intensifying the electrochemical reaction in the anodic oxidation processes. In contrast, a small surface area of the cathode made it possible to control the obtained nanostructure with no damages to the surface morphology. The average diameter of the surface nanopores increased from 60 to 67 nm by increasing the cathode surface area. Optical characterization demonstrates that the bandgap of the synthesized TiO2 nanotubes is about 3.2 eV. In the process of methylene blue (MB) degradation, the photocatalytic activity of the TNTs with an ordered initiation layer reaches 69% after 480 min irradiation.
    Keywords: Anodization, TiO2 nanotubes, Cathode area, Photocatalyst
  • Seyedehosna Hadavi, Reza Soltani *, Elnaz Tamjid, Rouhollah Mehdinavaz Aghdam Pages 93-100
    Magnesium alloys have received great attention for the medical applications due to their desired properties.But the main problem of magnesium alloys is the high rate of degradation which provides not enough time for healing.Therefore, in this study, it was tried to control the corrosion rate of Mg-Zn-Ca alloy by applying a nanofiber of polycaprolactone polymer coating and investigate the behaviors such as biocompatibility and rate of degradation. For this purpose, the polymer nanofibers were prepared by electrospinning method and applied on the surface of magnesium-zinc (4 wt. %) -calcium (2 wt. %) alloy, and the corrosion behavior and biological properties were compared with the uncoated alloy. corrosion behavior was measured with Tafel polarization test as well as hydrogen test in body fluid simulation solution, measurement of the pH of the solution after sample destruction, wettability angle test, cytotoxicity test and cell adhesion test.The Tafel polarization test showed that the applied coating increased the corrosion potential from -1.5 to -0.6 volts and corrosion rate reduced by about two order of magnitudes. The amount of hydrogen emitted by the corrosion reaction in the coated sample was much less than that of the uncoated sample. Biocompatibility test showed that the cytotoxicity of the coated sample was 8% lower than that of the uncoated sample. In the cell adhesion test, it was observed that far more cells adhered onto the surface of the coated sample compared to the uncoated sample. The wettability angle on the surface of the coated sample was 128° while that of the uncoated sample was 100°, due to the inherent hydrophobicity of this polymer. Despite the hydrophobicity of polycaprolactone polymer, which is not favorable for cell growth, due to the high biocompatibility of this polymer, coating Mg alloys with this method and material could have some advantages for future implants.
    Keywords: Magnesium alloy, Polycaprolactone polymer, Electrospinning, In vitro corrosion, Biocompatibility
  • Maoud Khodabakhshzade Fallah, Saeid Ghesmati Tabrizi *, Sheida Seyedi Pages 101-111
    Ex-situ and in-situ reinforced copper matrix composite samples containing 1.1 wt. % and 2 wt. % Al2O3 were produced by spark plasma sintering (SPS) at 830 °C and holding time of 30 min. In-situ reinforced sample was synthesized by a novel technique using the reaction between ball-milled copper oxide and Cu-10 wt. % Al filings as the additive and copper powder. The in-situ formation of alumina reinforcement was confirmed by SEM observation and EDS analysis. Morphology and distribution of reinforcement phase in different composite samples were studied. The in-situ reinforced composite sample showed superior flexural fracture strength and strain (349 MPa and 0.027, respectively). Different patterns of crack propagation were observed in the SEM images of fracture surfaces: the reinforcement’s interface path (due to the formation of undesired oxide phase) was dominant in the ex-situ samples, while the interface of in-situ reinforcements remained intact and the cracks originated in the agglomeration sites.
    Keywords: in-situ Al2O3 reinforcement, copper matrix composite, Flexural Strength, fracture behavior
  • Sara Daryoush, Hamed Mirzadeh *, Abolghasem Ataie Pages 112-120
    The principles and magnetic properties of nanostructured high-entropy alloys (HEAs) processed by mechanical alloying are overviewed. Firstly, the general concepts of HEAs (multi-principal element alloys with ≥5 elements) and phase formation rules are briefly reviewed. Subsequently, the processing of nanocrystalline and amorphous HEAs by mechanical alloying and the effect of high-energy ball milling parameters are summarized. Finally, the magnetic properties of nanostructured HEAs are critically discussed to infer some general rules. In summary, a higher content of ferromagnetic elements (e.g. Fe, Co, and Ni) normally results in a higher saturation magnetization. The as-milled products with solid solution phases show better soft-magnetic properties compared to the fully amorphous phases, and increasing the amount of the amorphous phase decreases the saturation magnetization. The magnetic properties are also influenced by processing (such as sintering) and thermal history through the alteration of phases and crystallite size.
    Keywords: High-entropy alloys, Mechanical alloying, Magnetic properties, Nanostructures